obj-$(CONFIG_DVB_USB_CXUSB) += dvb-usb-cxusb.o
dvb-usb-dib0700-objs = dib0700_core.o dib0700_devices.o
+obj-$(CONFIG_DVB_USB_DIB0700) += dvb-usb-dib0700.o
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
int dibusb_dib3000mc_frontend_attach(struct dvb_usb_adapter *adap)
{
- if (dib3000mc_attach(&adap->dev->i2c_adap, 1, DEFAULT_DIB3000P_I2C_ADDRESS, 0, &mod3000p_dib3000p_config, &adap->fe) == 0 ||
- dib3000mc_attach(&adap->dev->i2c_adap, 1, DEFAULT_DIB3000MC_I2C_ADDRESS, 0, &mod3000p_dib3000p_config, &adap->fe) == 0) {
+ if ((adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, DEFAULT_DIB3000P_I2C_ADDRESS, &mod3000p_dib3000p_config)) == NULL ||
+ (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, DEFAULT_DIB3000MC_I2C_ADDRESS, &mod3000p_dib3000p_config)) == NULL) {
if (adap->priv != NULL) {
struct dibusb_state *st = adap->priv;
st->ops.pid_parse = dib3000mc_pid_parse;
0x60
};
-int dibusb_dib3000mc_tuner_attach (struct dvb_usb_adapter *adap)
+int dibusb_dib3000mc_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dibusb_state *st = adap->priv;
- int ret;
u8 a,b;
u16 if1 = 1220;
struct i2c_adapter *tun_i2c;
}
tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
- if ((ret = mt2060_attach(adap->fe, tun_i2c, &stk3000p_mt2060_config, if1)) != 0) {
+ if (dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk3000p_mt2060_config, if1) != NULL) {
/* not found - use panasonic pll parameters */
- if (dvb_pll_attach(adap->fe, 0x60, tun_i2c, &dvb_pll_env57h1xd5) == NULL)
+ if (dvb_attach(dvb_pll_attach, adap->fe, 0x60, tun_i2c, &dvb_pll_env57h1xd5) == NULL)
return -ENOMEM;
} else {
st->mt2060_present = 1;
.usb_ctrl = CYPRESS_FX2,
.firmware = "dvb-usb-dibusb-6.0.0.8.fw",
-
.num_adapters = 1,
.adapter = {
{
{ .id = CYPRESS_FX2, .name = "Cypress FX2", .cpu_cs_register = 0xe600 },
};
-static int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx,
- int *pos);
-
/*
* load a firmware packet to the device
*/
return ret;
}
-static int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx,
+int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx,
int *pos)
{
u8 *b = (u8 *) &fw->data[*pos];
return *pos;
}
+EXPORT_SYMBOL(dvb_usb_get_hexline);
#define USB_PID_DIBCOM_MOD3000_WARM 0x0bb9
#define USB_PID_DIBCOM_MOD3001_COLD 0x0bc6
#define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7
-#define USB_PID_DIBCOM_STK7700 0x1e14
-#define USB_PID_DIBCOM_STK7700_REENUM 0x1e15
+#define USB_PID_DIBCOM_STK7700P 0x1e14
#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131
#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0
#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1
#define USB_PID_WT220U_ZL0353_WARM 0x022b
#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300
#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301
+#define USB_PID_HAUPPAUGE_NOVA_T_500 0x1234
+#define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x1234
+#define USB_PID_AVERMEDIA_VOLAR 0x1234
#define USB_PID_NEBULA_DIGITV 0x0201
#define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820
#define USB_PID_DVICO_BLUEBIRD_LG064F_COLD 0xd500
struct usb_data_stream;
/**
- * Properties of USB streaming - TODO this structure does not belong here actually
- * describes the kind of USB transfer used for MPEG2-TS-streaming.
+ * Properties of USB streaming - TODO this structure should be somewhere else
+ * describes the kind of USB transfer used for data-streaming.
* (BULK or ISOC)
*/
struct usb_data_stream_properties {
#define CYPRESS_AN2135 1
#define CYPRESS_AN2235 2
#define CYPRESS_FX2 3
- int usb_ctrl;
+ int usb_ctrl;
+ int (*download_firmware) (struct usb_device *, const struct firmware *);
const char firmware[FIRMWARE_NAME_MAX];
- int (*download_firmware) (struct usb_device *, const struct firmware *);
- int no_reconnect;
+ int no_reconnect;
int size_of_priv;
#define REMOTE_NO_KEY_PRESSED 0x00
#define REMOTE_KEY_PRESSED 0x01
#define REMOTE_KEY_REPEAT 0x02
- struct dvb_usb_rc_key *rc_key_map;
+ struct dvb_usb_rc_key *rc_key_map;
int rc_key_map_size;
int (*rc_query) (struct dvb_usb_device *, u32 *, int *);
int rc_interval;
*
* @urbs_initialized: number of URBs initialized.
* @urbs_submitted: number of URBs submitted.
- *
- * TODO put this in the correct place.
*/
#define MAX_NO_URBS_FOR_DATA_STREAM 10
struct usb_data_stream {
- struct usb_device *udev;
- struct usb_data_stream_properties props;
+ struct usb_device *udev;
+ struct usb_data_stream_properties props;
#define USB_STATE_INIT 0x00
#define USB_STATE_URB_BUF 0x01
void (*complete) (struct usb_data_stream *, u8 *, size_t);
- struct urb *urb_list[MAX_NO_URBS_FOR_DATA_STREAM];
-
- int buf_num;
- unsigned long buf_size;
- u8 *buf_list[MAX_NO_URBS_FOR_DATA_STREAM];
- dma_addr_t dma_addr[MAX_NO_URBS_FOR_DATA_STREAM];
+ struct urb *urb_list[MAX_NO_URBS_FOR_DATA_STREAM];
+ int buf_num;
+ unsigned long buf_size;
+ u8 *buf_list[MAX_NO_URBS_FOR_DATA_STREAM];
+ dma_addr_t dma_addr[MAX_NO_URBS_FOR_DATA_STREAM];
int urbs_initialized;
int urbs_submitted;
* @pll_addr: I2C address of the tuner for programming
* @pll_init: array containing the initialization buffer
* @pll_desc: pointer to the appropriate struct dvb_pll_desc
- *
* @tuner_pass_ctrl: called to (de)activate tuner passthru of the demod or the board
+ *
* @dvb_adap: device's dvb_adapter.
* @dmxdev: device's dmxdev.
* @demux: device's software demuxer.
* @dvb_frontend: device's frontend.
* @max_feed_count: how many feeds can be handled simultaneously by this
* device
+ *
+ * @fe_init: rerouted frontend-init (wakeup) function.
* @fe_sleep: rerouted frontend-sleep function.
- * @fe_init: rerouted frontend-init (wakeup) function.
+ *
* @stream: the usb data stream.
*/
struct dvb_usb_adapter {
#define DVB_USB_ADAP_STATE_DVB 0x001
int state;
- int id;
+ u8 id;
int feedcount;
int pid_filtering;
struct dvb_frontend *fe;
int max_feed_count;
- int (*fe_sleep) (struct dvb_frontend *);
int (*fe_init) (struct dvb_frontend *);
+ int (*fe_sleep) (struct dvb_frontend *);
struct usb_data_stream stream;
u8 chk;
};
extern int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type);
+extern int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, int *pos);
+
#endif
usb_free_stream_buffers(stream);
return -ENOMEM;
}
- deb_mem("buffer %d: %p (dma: %ld)\n",
+ deb_mem("buffer %d: %p (dma: %u)\n",
stream->buf_num, stream->buf_list[stream->buf_num], stream->dma_addr[stream->buf_num]);
memset(stream->buf_list[stream->buf_num],0,size);
stream->state |= USB_STATE_URB_BUF;
return 0;
}
-static int dib3000mc_demod_output_mode(struct dvb_frontend *demod, int mode)
-{
- struct dib3000mc_state *state = demod->demodulator_priv;
- return dib3000mc_set_output_mode(state, mode);
-}
-
-static int dib3000mc_i2c_enumeration(struct dvb_frontend *demod[], int no_of_demods, u8 default_addr)
-{
- struct dib3000mc_state *st;
- int k,ret=0;
- u8 new_addr;
-
- static u8 DIB3000MC_I2C_ADDRESS[] = {20,22,24,26};
-
- for (k = no_of_demods-1; k >= 0; k--) {
- st = demod[k]->demodulator_priv;
-
- /* designated i2c address */
- new_addr = DIB3000MC_I2C_ADDRESS[k];
-
- st->i2c_addr = new_addr;
- if (dib3000mc_identify(st) != 0) {
- st->i2c_addr = default_addr;
- if (dib3000mc_identify(st) != 0) {
- dprintk("-E- DiB3000P/MC #%d: not identified\n", k);
- return -EINVAL;
- }
- }
-
- /* turn on div_out */
- dib3000mc_demod_output_mode(demod[k], OUTMODE_MPEG2_PAR_CONT_CLK);
-
- // set new i2c address and force divstr (Bit 1) to value 0 (Bit 0)
- ret |= dib3000mc_write_word(st, 1024, (new_addr << 3) | 0x1);
- st->i2c_addr = new_addr;
- }
-
- for (k = 0; k < no_of_demods; k++) {
- st = demod[k]->demodulator_priv;
-
- ret |= dib3000mc_write_word(st, 1024, st->i2c_addr << 3);
-
- /* turn off data output */
- dib3000mc_demod_output_mode(demod[k],OUTMODE_HIGH_Z);
- dib3000mc_write_word(st, 769, (1 << 7) );
-
- }
- return 0;
-}
-
struct i2c_adapter * dib3000mc_get_tuner_i2c_master(struct dvb_frontend *demod, int gating)
{
struct dib3000mc_state *st = demod->demodulator_priv;
}
EXPORT_SYMBOL(dib3000mc_set_config);
-static struct dvb_frontend_ops dib3000mc_ops;
-
-int dib3000mc_attach(struct i2c_adapter *i2c_adap, int no_of_demods, u8 default_addr, u8 do_i2c_enum, struct dib3000mc_config cfg[], struct dvb_frontend *demod[])
+int dib3000mc_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib3000mc_config cfg[])
{
- struct dib3000mc_state *st;
- int k, num=0;
-
- if (no_of_demods < 1)
- return -EINVAL;
+ struct dib3000mc_state st = { .i2c_adap = i2c };
+ int k;
+ u8 new_addr;
- for (k = 0; k < no_of_demods; k++) {
- st = kzalloc(sizeof(struct dib3000mc_state), GFP_KERNEL);
- if (st == NULL)
- goto error;
+ static u8 DIB3000MC_I2C_ADDRESS[] = {20,22,24,26};
- num++;
+ for (k = no_of_demods-1; k >= 0; k--) {
+ st.cfg = &cfg[k];
- st->cfg = &cfg[k];
- // st->gpio_val = cfg[k].gpio_val;
- // st->gpio_dir = cfg[k].gpio_dir;
- st->i2c_adap = i2c_adap;
+ /* designated i2c address */
+ new_addr = DIB3000MC_I2C_ADDRESS[k];
+ st.i2c_addr = new_addr;
+ if (dib3000mc_identify(&st) != 0) {
+ st.i2c_addr = default_addr;
+ if (dib3000mc_identify(&st) != 0) {
+ dprintk("-E- DiB3000P/MC #%d: not identified\n", k);
+ return -ENODEV;
+ }
+ }
- demod[k] = &st->demod;
- demod[k]->demodulator_priv = st;
- memcpy(&st->demod.ops, &dib3000mc_ops, sizeof(struct dvb_frontend_ops));
+ dib3000mc_set_output_mode(&st, OUTMODE_MPEG2_PAR_CONT_CLK);
-// INIT_COMPONENT_REGISTER_ACCESS(&st->register_access, 12, 16, dib7000p_register_read, dib7000p_register_write, st);
-// demod[k]->register_access = &st->register_access;
+ // set new i2c address and force divstr (Bit 1) to value 0 (Bit 0)
+ dib3000mc_write_word(&st, 1024, (new_addr << 3) | 0x1);
+ st.i2c_addr = new_addr;
}
- if (do_i2c_enum) {
- if (dib3000mc_i2c_enumeration(demod,no_of_demods,default_addr) != 0)
- goto error;
- } else {
- st = demod[0]->demodulator_priv;
- st->i2c_addr = default_addr;
- if (dib3000mc_identify(st) != 0)
- goto error;
- }
+ for (k = 0; k < no_of_demods; k++) {
+ st.cfg = &cfg[k];
+ st.i2c_addr = DIB3000MC_I2C_ADDRESS[k];
- for (k = 0; k < num; k++) {
- st = demod[k]->demodulator_priv;
- dibx000_init_i2c_master(&st->i2c_master, DIB3000MC, st->i2c_adap, st->i2c_addr);
- }
+ dib3000mc_write_word(&st, 1024, st.i2c_addr << 3);
+ /* turn off data output */
+ dib3000mc_set_output_mode(&st, OUTMODE_HIGH_Z);
+ }
return 0;
+}
+EXPORT_SYMBOL(dib3000mc_i2c_enumeration);
+
+static struct dvb_frontend_ops dib3000mc_ops;
+
+struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib3000mc_config *cfg)
+{
+ struct dvb_frontend *demod;
+ struct dib3000mc_state *st;
+ st = kzalloc(sizeof(struct dib3000mc_state), GFP_KERNEL);
+ if (st == NULL)
+ return NULL;
+
+ st->cfg = cfg;
+ st->i2c_adap = i2c_adap;
+
+ demod = &st->demod;
+ demod->demodulator_priv = st;
+ memcpy(&st->demod.ops, &dib3000mc_ops, sizeof(struct dvb_frontend_ops));
+
+ if (dib3000mc_identify(st) != 0)
+ goto error;
+
+ dibx000_init_i2c_master(&st->i2c_master, DIB3000MC, st->i2c_adap, st->i2c_addr);
+
+ return demod;
error:
- for (k = 0; k < num; k++) {
- kfree(demod[k]->demodulator_priv);
- demod[k] = NULL;
- }
- return -EINVAL;
+ kfree(st);
+ return NULL;
}
-
EXPORT_SYMBOL(dib3000mc_attach);
static struct dvb_frontend_ops dib3000mc_ops = {
#define DEFAULT_DIB3000P_I2C_ADDRESS 24
#if defined(CONFIG_DVB_DIB3000MC) || defined(CONFIG_DVB_DIB3000MC_MODULE)
-extern int dib3000mc_attach(struct i2c_adapter *i2c_adap, int no_of_demods, u8 default_addr,
- u8 do_i2c_enum, struct dib3000mc_config cfg[], struct dvb_frontend *demod[]);
+extern struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib3000mc_config *cfg);
#else
-static inline struct dvb_frontend* dib3000mc_attach(const struct dib3000_config* config,
- struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops)
+static inline struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib3000mc_config *cfg)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
return NULL;
}
#endif // CONFIG_DVB_DIB3000MC
+extern int dib3000mc_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib3000mc_config cfg[]);
+
extern struct i2c_adapter * dib3000mc_get_tuner_i2c_master(struct dvb_frontend *demod, int gating);
extern int dib3000mc_pid_control(struct dvb_frontend *fe, int index, int pid,int onoff);
if (mt2060_writeregs(priv,mt2060_config2,sizeof(mt2060_config2)))
return;
+ /* initialize the clock output */
+ mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x30);
+
do {
b |= (1 << 6); // FM1SS;
mt2060_writereg(priv, REG_LO2C1,b);
static int mt2060_init(struct dvb_frontend *fe)
{
struct mt2060_priv *priv = fe->tuner_priv;
- return mt2060_writereg(priv, REG_VGAG,0x33);
+ return mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x33);
}
static int mt2060_sleep(struct dvb_frontend *fe)
{
struct mt2060_priv *priv = fe->tuner_priv;
- return mt2060_writereg(priv, REG_VGAG,0x30);
+ return mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x30);
}
static int mt2060_release(struct dvb_frontend *fe)
struct mt2060_config {
u8 i2c_address;
- /* Shall we add settings for the discrete outputs ? */
+ u8 clock_out; /* 0 = off, 1 = CLK/1, 2 = CLK/2, 3 = CLK/4 */
};
extern int mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1);
projects / linux-2.6 / commitdiff