V4L/DVB (7604): em28xx-dvb: Fix analog mode

The analog entries are wrong. Fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 2a44d2adeb0959d9bfd89fa8fc00a20cf62d329e..0859a84e7433541e7c9c91761dee43ba659c52b5 100644 (file)
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -171,26 +171,6 @@ struct em28xx_board em28xx_boards[] = {
                        .vmux     = TVP5150_SVIDEO,
                        .amux     = 1,
                } },
-               .analog_gpio = {
-                       {               /* xc3028 reset seq */
-                               .reg = 0x08,
-                               .val = 0x2d,
-                               .rst = 0x3d,
-                               .t1 = 5,
-                               .t2 = 10,
-                               .t3 = 5,
-                       },
-               },
-               .digital_gpio = {
-                       {               /* xc3028 reset seq */
-                               .reg = 0x08,
-                               .val = 0x2e,
-                               .rst = 0x3e,
-                               .t1 = 6,
-                               .t2 = 6,
-                               .t3 = 6,
-                       }
-               },
        },
        [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
                .name           = "Hauppauge WinTV HVR 950",
@@ -214,32 +194,6 @@ struct em28xx_board em28xx_boards[] = {
                        .vmux     = TVP5150_SVIDEO,
                        .amux     = 1,
                } },
-               .analog_gpio = {
-                       {               /* xc3028 reset seq */
-                               .reg = 0x08,
-                               .val = 0x2d,
-                               .rst = 0x3d,
-                               .t1 = 5,
-                               .t2 = 10,
-                               .t3 = 5,
-                       },
-               },
-               .digital_gpio = {
-                       {               /* xc3028 reset seq */
-                               .reg = 0x08,
-                               .val = 0x2e,
-                               .rst = 0x3e,
-                               .t1 = 6,
-                               .t2 = 6,
-                               .t3 = 6,
-                       }, {            /* demod reset seq */
-                               .reg = 0x04,
-                               .val = 0x04,
-                               .rst = 0x0c,
-                               .t2 = 10,
-                               .t3 = 10,
-                       }
-               },
        },
        [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
                .name         = "Terratec Hybrid XS",
@@ -476,7 +430,28 @@ struct usb_device_id em28xx_id_table [] = {
 };
 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
 
-/* EEPROM hash table for devices with generic USB IDs */
+/*
+ *  Reset sequences for analog/digital modes
+ */
+
+/* Board Hauppauge WinTV HVR 900 analog */
+struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
+       {  -1,   -1,   6},
+       {0x08, 0x2d,  10},
+       {0x08, 0x3d,   5},
+       { -1,    -1,  -1},
+};
+/* Board Hauppauge WinTV HVR 900 digital */
+struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
+       {  -1,   -1,   6},
+       {0x08, 0x2e,   6},
+       {0x08, 0x3e,   6},
+       { -1,    -1,  -1},
+};
+
+/*
+ * EEPROM hash table for devices with generic USB IDs
+ */
 static struct em28xx_hash_table em28xx_eeprom_hash [] = {
        /* P/N: SA 60002070465 Tuner: TVF7533-MF */
        {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
@@ -490,9 +465,9 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = {
 
 int em28xx_tuner_callback(void *ptr, int command, int arg)
 {
-       int rc = 0, i;
+       int rc = 0;
        struct em28xx *dev = ptr;
-       struct gpio_ctl *gpio_ctl;
+       struct em28xx_reg_seq *gpio;
 
        if (dev->tuner_type != TUNER_XC2028)
                return 0;
@@ -501,44 +476,31 @@ int em28xx_tuner_callback(void *ptr, int command, int arg)
                return 0;
 
        if (dev->mode == EM28XX_ANALOG_MODE)
-               gpio_ctl = dev->analog_gpio;
+               gpio = dev->analog_gpio;
        else
-               gpio_ctl = dev->digital_gpio;
+               gpio = dev->digital_gpio;
 
        /* djh - Not sure if these are still required */
-       if (dev->mode == EM28XX_ANALOG_MODE) {
-         dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
-         dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1);
-         msleep(6);
-       } else {
-         dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
-         dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x37", 1);
-         msleep(6);
-       }
-
-       /* Send GPIO reset sequences specified at board entry */
-       for (i = 0; i < MAX_GPIO; i++) {
-               if (!gpio_ctl->val)
-                       break;
-
-               dev->em28xx_write_regs(dev,
-                                      gpio_ctl->reg,
-                                      &gpio_ctl->val, 1);
-               if (gpio_ctl->t1)
-                       msleep(gpio_ctl->t1);
-
-               if (!gpio_ctl->rst) {
-                       gpio_ctl++;
-                       continue;
-               }
+       dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
+       if (dev->mode == EM28XX_ANALOG_MODE)
+               dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1);
+       else
+               dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x37", 1);
+       msleep(6);
 
-               dev->em28xx_write_regs(dev,
-                                      gpio_ctl->reg,
-                                      &gpio_ctl->rst, 1);
-               if (gpio_ctl->t2)
-                       msleep(gpio_ctl->t2);
+       if (!gpio)
+               return rc;
 
-               gpio_ctl++;
+       /* Send GPIO reset sequences specified at board entry */
+       while (gpio->sleep >= 0) {
+               if (gpio->reg >= 0)
+                       rc = dev->em28xx_write_regs(dev,
+                                                   gpio->reg,
+                                                   &gpio->val, 1);
+               if (gpio->sleep > 0)
+                       msleep(gpio->sleep);
+
+               gpio++;
        }
        return rc;
 }
@@ -554,8 +516,6 @@ static void em28xx_set_model(struct em28xx *dev)
        dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s;
        dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
        dev->has_dvb = em28xx_boards[dev->model].has_dvb;
-       dev->analog_gpio = em28xx_boards[dev->model].analog_gpio;
-       dev->digital_gpio = em28xx_boards[dev->model].digital_gpio;
 }
 
 /* Since em28xx_pre_card_setup() requires a proper dev->model,
@@ -573,13 +533,22 @@ void em28xx_pre_card_setup(struct em28xx *dev)
        case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
                em28xx_write_regs(dev, XCLK_REG, "\x27", 1);
                em28xx_write_regs(dev, I2C_CLK_REG, "\x40", 1);
-       }
+               em28xx_write_regs(dev, 0x08, "\xff", 1);
+               em28xx_write_regs(dev, 0x04, "\x00", 1);
+               msleep(100);
+               em28xx_write_regs(dev, 0x04, "\x08", 1);
+               msleep(100);
+               em28xx_write_regs(dev, 0x08, "\xff", 1);
+               msleep(50);
+               em28xx_write_regs(dev, 0x08, "\x2d", 1);
+               msleep(50);
+               em28xx_write_regs(dev, 0x08, "\x3d", 1);
+
+               dev->analog_gpio = hauppauge_wintv_hvr_900_analog;
+               dev->digital_gpio = hauppauge_wintv_hvr_900_digital;
 
-       /* Put xc2028 tuners and demods into a sane state */
-       if (dev->tuner_type == TUNER_XC2028) {
-               dev->mode = EM28XX_ANALOG_MODE;
-               em28xx_tuner_callback(dev, XC2028_TUNER_RESET, 0);
-       };
+               break;
+       }
 }
 
 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)

diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index cb9f721ca28007f099bdaa6cd1648b25a748380f..77f64900717def904061ea83b222ca37c73ab10b 100644 (file)
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -331,22 +331,17 @@ int em28xx_capture_start(struct em28xx *dev, int start)
        if (!start) {
                /* disable video capture */
                rc = em28xx_write_regs(dev, VINENABLE_REG, "\x27", 1);
-               if (rc < 0)
-                       return rc;
+               return rc;
        }
 
        /* enable video capture */
        rc = em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
-       if (rc < 0)
-               return rc;
+
        if (dev->mode == EM28XX_ANALOG_MODE)
                rc = em28xx_write_regs(dev, VINENABLE_REG,"\x67", 1);
        else
                rc = em28xx_write_regs(dev, VINENABLE_REG,"\x37", 1);
 
-       if (rc < 0)
-               return rc;
-
        msleep (6);
 
        return rc;

diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index fd8f44cb6cbc37405218378fbae535f5a0cd08ef..64816ae106e3fddedf0fcfc656d04b3e88f8e358 100644 (file)
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -414,6 +414,7 @@ static int dvb_init(struct em28xx *dev)
                goto out_free;
        }
 
+       printk(KERN_INFO "Successfully loaded em28xx-dvb\n");
        return 0;
 
 out_free:

diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index e5fd2dc77355cb3064a238fd26b56e409a226e51..91dce95cd19c06c5cc1cf95aa256991b08f79d5c 100644 (file)
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -225,19 +225,10 @@ enum em28xx_decoder {
        EM28XX_SAA7114
 };
 
-#define MAX_GPIO 2
-struct gpio_ctl {
-               /* Register to be set */
-       unsigned char reg;
-               /* Initial/final value */
+struct em28xx_reg_seq {
+       int reg;
        unsigned char val;
-               /* reset value - if set, it will do:
-                  val1 - val2 - val1
-                */
-       unsigned char rst;
-               /* Sleep times
-                */
-       unsigned int  t1, t2, t3;
+       int sleep;
 };
 
 struct em28xx_board {
@@ -255,9 +246,6 @@ struct em28xx_board {
        unsigned int max_range_640_480:1;
        unsigned int has_dvb:1;
 
-       struct gpio_ctl analog_gpio[MAX_GPIO];
-       struct gpio_ctl digital_gpio[MAX_GPIO];
-
        enum em28xx_decoder decoder;
 
        struct em28xx_input       input[MAX_EM28XX_INPUT];
@@ -343,8 +331,8 @@ struct em28xx {
        unsigned int max_range_640_480:1;
        unsigned int has_dvb:1;
 
-       struct gpio_ctl *analog_gpio;
-       struct gpio_ctl *digital_gpio;
+       /* GPIO sequences for tuner callback */
+       struct em28xx_reg_seq *analog_gpio, *digital_gpio;
 
        int video_inputs;       /* number of video inputs */
        struct list_head        devlist;