]> err.no Git - linux-2.6/commitdiff
fbdev: intelfb: add support for the Intel Integrated Graphics Controller 965G/965GM
authorMaik Broemme <mbroemme@plusserver.de>
Mon, 28 Apr 2008 09:15:43 +0000 (02:15 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Mon, 28 Apr 2008 15:58:41 +0000 (08:58 -0700)
Add support for the 965G and 965GM graphic chipsets to the intelfb driver.  I
have a notebook with an Intel Mobile GM965/GL960 Integrated Graphics
Controller and with the attached patch the framebuffer comes up.  I have
tested it a bit with DirectFB to make sure it is working stable.

I also have an Intel Mobile GM945 and I compared the results, the programming
interface of the 9xx series from Intel is mostly the same, so I think the
patch should add all the functionality which the 945GM has.

Signed-off-by: Maik Broemme <mbroemme@plusserver.de>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Documentation/fb/intelfb.txt
drivers/video/Kconfig
drivers/video/intelfb/intelfb.h
drivers/video/intelfb/intelfb_i2c.c
drivers/video/intelfb/intelfbdrv.c
drivers/video/intelfb/intelfbhw.c

index da5ee74219e8c55016dda1f8d1a6fb4820e5e717..27a3160650a468bed78a1483d485e1ccbf51bd6d 100644 (file)
@@ -14,6 +14,8 @@ graphics devices.  These would include:
        Intel 915GM
        Intel 945G
        Intel 945GM
+       Intel 965G
+       Intel 965GM
 
 B.  List of available options
 
index 73d3afad7c50cbde77bc2fb514f79547238c3ba7..55b629a2326e34d6deef20d050d8638c111f054f 100644 (file)
@@ -1119,7 +1119,7 @@ config FB_CARILLO_RANCH
          This driver supports the LE80578 (Carillo Ranch) board
 
 config FB_INTEL
-       tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
+       tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
        depends on FB && EXPERIMENTAL && PCI && X86
        select AGP
        select AGP_INTEL
@@ -1129,7 +1129,7 @@ config FB_INTEL
        select FB_CFB_IMAGEBLIT
        help
          This driver supports the on-board graphics built in to the Intel
-          830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets.
+          830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
           Say Y if you have and plan to use such a board.
 
          If you say Y here and want DDC/I2C support you must first say Y to
index 8367961779420c275b0b5e2f0a693b2f702fa73c..3325fbd68ab3b235a9ec370e59cd96314b414359 100644 (file)
@@ -12,9 +12,9 @@
 #endif
 
 /*** Version/name ***/
-#define INTELFB_VERSION                        "0.9.4"
+#define INTELFB_VERSION                        "0.9.5"
 #define INTELFB_MODULE_NAME            "intelfb"
-#define SUPPORTED_CHIPSETS             "830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM"
+#define SUPPORTED_CHIPSETS             "830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM"
 
 
 /*** Debug/feature defines ***/
@@ -58,6 +58,8 @@
 #define PCI_DEVICE_ID_INTEL_915GM      0x2592
 #define PCI_DEVICE_ID_INTEL_945G       0x2772
 #define PCI_DEVICE_ID_INTEL_945GM      0x27A2
+#define PCI_DEVICE_ID_INTEL_965G       0x29A2
+#define PCI_DEVICE_ID_INTEL_965GM      0x2A02
 
 /* Size of MMIO region */
 #define INTEL_REG_SIZE                 0x80000
@@ -158,6 +160,8 @@ enum intel_chips {
        INTEL_915GM,
        INTEL_945G,
        INTEL_945GM,
+       INTEL_965G,
+       INTEL_965GM,
 };
 
 struct intelfb_hwstate {
@@ -358,7 +362,9 @@ struct intelfb_info {
 #define IS_I9XX(dinfo) (((dinfo)->chipset == INTEL_915G) ||    \
                        ((dinfo)->chipset == INTEL_915GM) ||    \
                        ((dinfo)->chipset == INTEL_945G) ||     \
-                       ((dinfo)->chipset==INTEL_945GM))
+                       ((dinfo)->chipset == INTEL_945GM) ||    \
+                       ((dinfo)->chipset == INTEL_965G) ||     \
+                       ((dinfo)->chipset == INTEL_965GM))
 
 #ifndef FBIO_WAITFORVSYNC
 #define FBIO_WAITFORVSYNC      _IOW('F', 0x20, __u32)
index 94c08bb5acf18d146eb62a19b5609d05dc72b906..ca95f09d8b43f7e9f88ddf7681e361f386493c0c 100644 (file)
@@ -169,6 +169,8 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo)
                /* has some LVDS + tv-out */
        case INTEL_945G:
        case INTEL_945GM:
+       case INTEL_965G:
+       case INTEL_965GM:
                /* SDVO ports have a single control bus - 2 devices */
                dinfo->output[i].type = INTELFB_OUTPUT_SDVO;
                intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus,
index 481d58f7535d0cc4cb5e09ba258a3a486f3cef33..e44303f9bc524ea64e86bd00030ffbaa3110dd01 100644 (file)
@@ -2,7 +2,7 @@
  * intelfb
  *
  * Linux framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/
- * 945G/945GM integrated graphics chips.
+ * 945G/945GM/965G/965GM integrated graphics chips.
  *
  * Copyright © 2002, 2003 David Dawes <dawes@xfree86.org>
  *                   2004 Sylvain Meyer
@@ -99,6 +99,9 @@
  *              Add vram option to reserve more memory than stolen by BIOS
  *              Fix intelfbhw_pan_display typo
  *              Add __initdata annotations
+ *
+ *    04/2008 - Version 0.9.5
+ *              Add support for 965G/965GM. (Maik Broemme <mbroemme@plusserver.de>)
  */
 
 #include <linux/module.h>
@@ -180,6 +183,8 @@ static struct pci_device_id intelfb_pci_table[] __devinitdata = {
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915GM },
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945G },
        { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945GM },
+       { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_965G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_965G },
+       { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_965GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_965GM },
        { 0, }
 };
 
@@ -549,7 +554,10 @@ static int __devinit intelfb_pci_register(struct pci_dev *pdev,
        if ((ent->device == PCI_DEVICE_ID_INTEL_915G) ||
            (ent->device == PCI_DEVICE_ID_INTEL_915GM) ||
            (ent->device == PCI_DEVICE_ID_INTEL_945G)  ||
-           (ent->device == PCI_DEVICE_ID_INTEL_945GM)) {
+           (ent->device == PCI_DEVICE_ID_INTEL_945GM) ||
+           (ent->device == PCI_DEVICE_ID_INTEL_965G) ||
+           (ent->device == PCI_DEVICE_ID_INTEL_965GM)) {
+
                aperture_bar = 2;
                mmio_bar = 0;
        }
index fa1fff5535654e4f6bbce1c294efd9031d16d1a2..8e6d6a4db0ad85a52d8fd8313fcaf7f9f6884d3b 100644 (file)
@@ -143,6 +143,18 @@ int intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo)
                dinfo->mobile = 1;
                dinfo->pll_index = PLLS_I9xx;
                return 0;
+       case PCI_DEVICE_ID_INTEL_965G:
+               dinfo->name = "Intel(R) 965G";
+               dinfo->chipset = INTEL_965G;
+               dinfo->mobile = 0;
+               dinfo->pll_index = PLLS_I9xx;
+               return 0;
+       case PCI_DEVICE_ID_INTEL_965GM:
+               dinfo->name = "Intel(R) 965GM";
+               dinfo->chipset = INTEL_965GM;
+               dinfo->mobile = 1;
+               dinfo->pll_index = PLLS_I9xx;
+               return 0;
        default:
                return 1;
        }
@@ -174,7 +186,9 @@ int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
        case PCI_DEVICE_ID_INTEL_915GM:
        case PCI_DEVICE_ID_INTEL_945G:
        case PCI_DEVICE_ID_INTEL_945GM:
-               /* 915 and 945 chipsets support a 256MB aperture.
+       case PCI_DEVICE_ID_INTEL_965G:
+       case PCI_DEVICE_ID_INTEL_965GM:
+               /* 915, 945 and 965 chipsets support a 256MB aperture.
                   Aperture size is determined by inspected the
                   base address of the aperture. */
                if (pci_resource_start(pdev, 2) & 0x08000000)