apic_write_around(APIC_LVT1, value);
}
-void __init setup_local_APIC (void)
+void __devinit setup_local_APIC(void)
{
unsigned long oldvalue, value, ver, maxlvt;
.cls = &lapic_sysclass,
};
-static void __init apic_pm_activate(void)
+static void __devinit apic_pm_activate(void)
{
apic_pm_state.active = 1;
}
* but we do not accept timer interrupts yet. We only allow the BP
* to calibrate.
*/
-static unsigned int __init get_8254_timer_count(void)
+static unsigned int __devinit get_8254_timer_count(void)
{
extern spinlock_t i8253_lock;
unsigned long flags;
}
/* next tick in 8254 can be caught by catching timer wraparound */
-static void __init wait_8254_wraparound(void)
+static void __devinit wait_8254_wraparound(void)
{
unsigned int curr_count, prev_count;
* Default initialization for 8254 timers. If we use other timers like HPET,
* we override this later
*/
-void (*wait_timer_tick)(void) __initdata = wait_8254_wraparound;
+void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound;
/*
* This function sets up the local APIC timer, with a timeout of
apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
}
-static void __init setup_APIC_timer(unsigned int clocks)
+static void __devinit setup_APIC_timer(unsigned int clocks)
{
unsigned long flags;
local_irq_enable();
}
-void __init setup_secondary_APIC_clock(void)
+void __devinit setup_secondary_APIC_clock(void)
{
setup_APIC_timer(calibration_result);
}
DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
-static int cachesize_override __initdata = -1;
-static int disable_x86_fxsr __initdata = 0;
-static int disable_x86_serial_nr __initdata = 1;
+static int cachesize_override __devinitdata = -1;
+static int disable_x86_fxsr __devinitdata = 0;
+static int disable_x86_serial_nr __devinitdata = 1;
struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
}
__setup("cachesize=", cachesize_setup);
-int __init get_model_name(struct cpuinfo_x86 *c)
+int __devinit get_model_name(struct cpuinfo_x86 *c)
{
unsigned int *v;
char *p, *q;
}
-void __init display_cacheinfo(struct cpuinfo_x86 *c)
+void __devinit display_cacheinfo(struct cpuinfo_x86 *c)
{
unsigned int n, dummy, ecx, edx, l2size;
/* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */
/* Look up CPU names by table lookup. */
-static char __init *table_lookup_model(struct cpuinfo_x86 *c)
+static char __devinit *table_lookup_model(struct cpuinfo_x86 *c)
{
struct cpu_model_info *info;
}
-void __init get_cpu_vendor(struct cpuinfo_x86 *c, int early)
+void __devinit get_cpu_vendor(struct cpuinfo_x86 *c, int early)
{
char *v = c->x86_vendor_id;
int i;
/* Probe for the CPUID instruction */
-static int __init have_cpuid_p(void)
+static int __devinit have_cpuid_p(void)
{
return flag_is_changeable_p(X86_EFLAGS_ID);
}
#endif
}
-void __init generic_identify(struct cpuinfo_x86 * c)
+void __devinit generic_identify(struct cpuinfo_x86 * c)
{
u32 tfms, xlvl;
int junk;
}
}
-static void __init squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+static void __devinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
{
if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) {
/* Disable processor serial number */
/*
* This does the hard work of actually picking apart the CPU stuff...
*/
-void __init identify_cpu(struct cpuinfo_x86 *c)
+void __devinit identify_cpu(struct cpuinfo_x86 *c)
{
int i;
}
#ifdef CONFIG_X86_HT
-void __init detect_ht(struct cpuinfo_x86 *c)
+void __devinit detect_ht(struct cpuinfo_x86 *c)
{
u32 eax, ebx, ecx, edx;
int index_msb, tmp;
}
#endif
-void __init print_cpu_info(struct cpuinfo_x86 *c)
+void __devinit print_cpu_info(struct cpuinfo_x86 *c)
{
char *vendor = NULL;
printk("\n");
}
-cpumask_t cpu_initialized __initdata = CPU_MASK_NONE;
+cpumask_t cpu_initialized __devinitdata = CPU_MASK_NONE;
/* This is hacky. :)
* We're emulating future behavior.
* and IDT. We reload them nevertheless, this function acts as a
* 'CPU state barrier', nothing should get across.
*/
-void __init cpu_init (void)
+void __devinit cpu_init(void)
{
int cpu = smp_processor_id();
struct tss_struct * t = &per_cpu(init_tss, cpu);
struct movsl_mask movsl_mask;
#endif
-void __init early_intel_workaround(struct cpuinfo_x86 *c)
+void __devinit early_intel_workaround(struct cpuinfo_x86 *c)
{
if (c->x86_vendor != X86_VENDOR_INTEL)
return;
* This is called before we do cpu ident work
*/
-int __init ppro_with_ram_bug(void)
+int __devinit ppro_with_ram_bug(void)
{
/* Uses data from early_cpu_detect now */
if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
* P4 Xeon errata 037 workaround.
* Hardware prefetcher may cause stale data to be loaded into the cache.
*/
-static void __init Intel_errata_workarounds(struct cpuinfo_x86 *c)
+static void __devinit Intel_errata_workarounds(struct cpuinfo_x86 *c)
{
unsigned long lo, hi;
/*
* find out the number of processor cores on the die
*/
-static int __init num_cpu_cores(struct cpuinfo_x86 *c)
+static int __devinit num_cpu_cores(struct cpuinfo_x86 *c)
{
unsigned int eax;
return 1;
}
-static void __init init_intel(struct cpuinfo_x86 *c)
+static void __devinit init_intel(struct cpuinfo_x86 *c)
{
unsigned int l2 = 0;
char *p = NULL;
return size;
}
-static struct cpu_dev intel_cpu_dev __initdata = {
+static struct cpu_dev intel_cpu_dev __devinitdata = {
.c_vendor = "Intel",
.c_ident = { "GenuineIntel" },
.c_models = {
};
/* all the cache descriptor types we care about (no TLB or trace cache entries) */
-static struct _cache_table cache_table[] __initdata =
+static struct _cache_table cache_table[] __devinitdata =
{
{ 0x06, LVL_1_INST, 8 }, /* 4-way set assoc, 32 byte line size */
{ 0x08, LVL_1_INST, 16 }, /* 4-way set assoc, 32 byte line size */
return retval;
}
-unsigned int __init init_intel_cacheinfo(struct cpuinfo_x86 *c)
+unsigned int __devinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
{
unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */
void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
/* This has to be run for each processor */
-void __init mcheck_init(struct cpuinfo_x86 *c)
+void __devinit mcheck_init(struct cpuinfo_x86 *c)
{
if (mce_disabled==1)
return;
}
/* Set up machine check reporting for processors with Intel style MCE */
-void __init intel_p5_mcheck_init(struct cpuinfo_x86 *c)
+void __devinit intel_p5_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
}
}
-void __init select_idle_routine(const struct cpuinfo_x86 *c)
+void __devinit select_idle_routine(const struct cpuinfo_x86 *c)
{
if (cpu_has(c, X86_FEATURE_MWAIT)) {
printk("monitor/mwait feature present.\n");
address, and must not be in the .bss segment! */
unsigned long init_pg_tables_end __initdata = ~0UL;
-int disable_pse __initdata = 0;
+int disable_pse __devinitdata = 0;
/*
* Machine setup..
#include <smpboot_hooks.h>
/* Set if we find a B stepping CPU */
-static int __initdata smp_b_stepping;
+static int __devinitdata smp_b_stepping;
/* Number of siblings per CPU package */
int smp_num_siblings = 1;
* has made sure it's suitably aligned.
*/
-static unsigned long __init setup_trampoline(void)
+static unsigned long __devinit setup_trampoline(void)
{
memcpy(trampoline_base, trampoline_data, trampoline_end - trampoline_data);
return virt_to_phys(trampoline_base);
* a given CPU
*/
-static void __init smp_store_cpu_info(int id)
+static void __devinit smp_store_cpu_info(int id)
{
struct cpuinfo_x86 *c = cpu_data + id;
static atomic_t init_deasserted;
-static void __init smp_callin(void)
+static void __devinit smp_callin(void)
{
int cpuid, phys_id;
unsigned long timeout;
/*
* Activate a secondary processor.
*/
-static void __init start_secondary(void *unused)
+static void __devinit start_secondary(void *unused)
{
/*
* Dont put anything before smp_callin(), SMP
* from the task structure
* This function must not return.
*/
-void __init initialize_secondary(void)
+void __devinit initialize_secondary(void)
{
/*
* We don't actually need to load the full TSS,
* INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
* won't ... remember to clear down the APIC, etc later.
*/
-static int __init
+static int __devinit
wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
{
unsigned long send_status = 0, accept_status = 0;
#endif /* WAKE_SECONDARY_VIA_NMI */
#ifdef WAKE_SECONDARY_VIA_INIT
-static int __init
+static int __devinit
wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
{
unsigned long send_status = 0, accept_status = 0;
extern cpumask_t cpu_initialized;
-static int __init do_boot_cpu(int apicid)
+static int __devinit do_boot_cpu(int apicid)
/*
* NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
* (ie clustered apic addressing mode), this is a LOGICAL apic ID.
static inline void cpufreq_delayed_get(void);
-int tsc_disable __initdata = 0;
+int tsc_disable __devinitdata = 0;
extern spinlock_t i8253_lock;