]> err.no Git - linux-2.6/commitdiff
[PATCH] driver model wakeup flags
authorDavid Brownell <david-b@pacbell.net>
Tue, 13 Sep 2005 02:39:34 +0000 (19:39 -0700)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 28 Oct 2005 16:52:50 +0000 (09:52 -0700)
This is a refresh of an earlier patch to add "wakeup" support to the
PM core model.  This provides per-device bus-neutral control of the
use of wakeup events.

  * "struct device_pm_info" has two bits that are initialized as
    part of setting up the enclosing struct device:
      - "can_wakeup", reflecting hardware capabilities
      - "may_wakeup", the policy setting (when CONFIG_PM)

  * There's a writeable sysfs "wakeup" file, with one of two values:
      - "enabled", when the policy is to allow wakeup
      - "disabled", when the policy is not to allow it
      - "" if the device can't currently issue wakeups

By default, wakeup is enabled on all devices that support it.  If its
driver doesn't support it ... treat it as a bug.  :)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/base/core.c
drivers/base/power/sysfs.c
include/linux/pm.h

index 6ab73f5c799aa486b3cc6f8050b82f962c02ff89..31109193e2c4f9c8d46780811d38db82ef244131 100644 (file)
@@ -225,6 +225,7 @@ void device_initialize(struct device *dev)
                   klist_children_put);
        INIT_LIST_HEAD(&dev->dma_pools);
        init_MUTEX(&dev->sem);
+       device_init_wakeup(dev, 0);
 }
 
 /**
index 8d04fb435c176ebc92f89793cb5998d05721694b..89c57875f3e53c25f666cbb943933cb518396adb 100644 (file)
@@ -48,8 +48,81 @@ static ssize_t state_store(struct device * dev, struct device_attribute *attr, c
 static DEVICE_ATTR(state, 0644, state_show, state_store);
 
 
+/*
+ *     wakeup - Report/change current wakeup option for device
+ *
+ *     Some devices support "wakeup" events, which are hardware signals
+ *     used to activate devices from suspended or low power states.  Such
+ *     devices have one of three values for the sysfs power/wakeup file:
+ *
+ *      + "enabled\n" to issue the events;
+ *      + "disabled\n" not to do so; or
+ *      + "\n" for temporary or permanent inability to issue wakeup.
+ *
+ *     (For example, unconfigured USB devices can't issue wakeups.)
+ *
+ *     Familiar examples of devices that can issue wakeup events include
+ *     keyboards and mice (both PS2 and USB styles), power buttons, modems,
+ *     "Wake-On-LAN" Ethernet links, GPIO lines, and more.  Some events
+ *     will wake the entire system from a suspend state; others may just
+ *     wake up the device (if the system as a whole is already active).
+ *     Some wakeup events use normal IRQ lines; other use special out
+ *     of band signaling.
+ *
+ *     It is the responsibility of device drivers to enable (or disable)
+ *     wakeup signaling as part of changing device power states, respecting
+ *     the policy choices provided through the driver model.
+ *
+ *     Devices may not be able to generate wakeup events from all power
+ *     states.  Also, the events may be ignored in some configurations;
+ *     for example, they might need help from other devices that aren't
+ *     active, or which may have wakeup disabled.  Some drivers rely on
+ *     wakeup events internally (unless they are disabled), keeping
+ *     their hardware in low power modes whenever they're unused.  This
+ *     saves runtime power, without requiring system-wide sleep states.
+ */
+
+static const char enabled[] = "enabled";
+static const char disabled[] = "disabled";
+
+static ssize_t
+wake_show(struct device * dev, struct device_attribute *attr, char * buf)
+{
+       return sprintf(buf, "%s\n", device_can_wakeup(dev)
+               ? (device_may_wakeup(dev) ? enabled : disabled)
+               : "");
+}
+
+static ssize_t
+wake_store(struct device * dev, struct device_attribute *attr,
+       const char * buf, size_t n)
+{
+       char *cp;
+       int len = n;
+
+       if (!device_can_wakeup(dev))
+               return -EINVAL;
+
+       cp = memchr(buf, '\n', n);
+       if (cp)
+               len = cp - buf;
+       if (len == sizeof enabled - 1
+                       && strncmp(buf, enabled, sizeof enabled - 1) == 0)
+               device_set_wakeup_enable(dev, 1);
+       else if (len == sizeof disabled - 1
+                       && strncmp(buf, disabled, sizeof disabled - 1) == 0)
+               device_set_wakeup_enable(dev, 0);
+       else
+               return -EINVAL;
+       return n;
+}
+
+static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
+
+
 static struct attribute * power_attrs[] = {
        &dev_attr_state.attr,
+       &dev_attr_wakeup.attr,
        NULL,
 };
 static struct attribute_group pm_attr_group = {
index 5cfb07648eca1c999403bc17e2f15ea14e125286..7897cf500c51c3c5d1c6d1284eac9e1a061b4f09 100644 (file)
@@ -219,7 +219,9 @@ typedef struct pm_message {
 
 struct dev_pm_info {
        pm_message_t            power_state;
+       unsigned                can_wakeup:1;
 #ifdef CONFIG_PM
+       unsigned                should_wakeup:1;
        pm_message_t            prev_state;
        void                    * saved_state;
        atomic_t                pm_users;
@@ -236,13 +238,35 @@ extern void device_resume(void);
 
 #ifdef CONFIG_PM
 extern int device_suspend(pm_message_t state);
-#else
+
+#define device_set_wakeup_enable(dev,val) \
+       ((dev)->power.should_wakeup = !!(val))
+#define device_may_wakeup(dev) \
+       (device_can_wakeup(dev) && (dev)->power.should_wakeup)
+
+#else /* !CONFIG_PM */
+
 static inline int device_suspend(pm_message_t state)
 {
        return 0;
 }
+
+#define device_set_wakeup_enable(dev,val)      do{}while(0)
+#define device_may_wakeup(dev)                 (0)
+
 #endif
 
+/* changes to device_may_wakeup take effect on the next pm state change.
+ * by default, devices should wakeup if they can.
+ */
+#define device_can_wakeup(dev) \
+       ((dev)->power.can_wakeup)
+#define device_init_wakeup(dev,val) \
+       do { \
+               device_can_wakeup(dev) = !!(val); \
+               device_set_wakeup_enable(dev,val); \
+       } while(0)
+
 #endif /* __KERNEL__ */
 
 #endif /* _LINUX_PM_H */