Blackfin arch: initial tepla-bf561 board support

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 35b33a44677b7239742bda41c99ce8874a674750..b1b111bb2f3aff22bb5d8b36959b0338faf443ea 100644 (file)
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -193,7 +193,7 @@ config BFIN537_BLUETECHNIX_CM
          CM-BF537 support for EVAL- and DEV-Board.
 
 config BFIN561_BLUETECHNIX_CM
-       bool "BF561-CM"
+       bool "Bluetechnix CM-BF561"
        depends on (BF561)
        help
          CM-BF561 support for EVAL- and DEV-Board.
@@ -204,6 +204,12 @@ config BFIN561_EZKIT
        help
          BF561-EZKIT-LITE board Support.
 
+config BFIN561_TEPLA
+       bool "BF561-TEPLA"
+       depends on (BF561)
+       help
+        BF561-TEPLA board Support.
+
 config PNAV10
        bool "PNAV 1.0 board"
        depends on (BF537)

diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile
index 886edc739ab44ff542e0646b37047067810474dd..495a1cf9d4529dc04ab81e0dcd77d840d84cd8b8 100644 (file)
--- a/arch/blackfin/mach-bf561/boards/Makefile
+++ b/arch/blackfin/mach-bf561/boards/Makefile
@@ -3,5 +3,6 @@
 #
 
 obj-$(CONFIG_GENERIC_BOARD)            += generic_board.o
-obj-$(CONFIG_BFIN561_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN561_BLUETECHNIX_CM)   += cm_bf561.o
+obj-$(CONFIG_BFIN561_EZKIT)            += ezkit.o
+obj-$(CONFIG_BFIN561_TEPLA)            += tepla.o

diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c
new file mode 100644 (file)
index 0000000..db308c7
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/tepla.c
@@ -0,0 +1,61 @@
+/*
+ *  File: arch/blackfin/mach-bf561/tepla.c
+ *
+ *  Copyright 2004-2007 Analog Devices Inc.
+ *  Only SMSC91C1111 was registered, may do more later.
+ *
+ *  Copyright 2005 National ICT Australia (NICTA), Aidan Williams <aidan@nicta.com.au>
+ *  Thanks to Jamey Hicks.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/irq.h>
+
+char *bfin_board_name = "Tepla-BF561";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+static struct resource smc91x_resources[] = {
+       {
+               .start  = 0x2C000300,
+               .end    = 0x2C000320,
+               .flags  = IORESOURCE_MEM,
+       },{
+               .start  = IRQ_PROG_INTB,
+               .end    = IRQ_PROG_INTB,
+               .flags  = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL,
+       },{
+               /*
+                *  denotes the flag pin and is used directly if
+                *  CONFIG_IRQCHIP_DEMUX_GPIO is defined.
+                */
+               .start  = IRQ_PF7,
+               .end    = IRQ_PF7,
+               .flags  = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL,
+       },
+};
+
+static struct platform_device smc91x_device = {
+       .name          = "smc91x",
+       .id            = 0,
+       .num_resources = ARRAY_SIZE(smc91x_resources),
+       .resource      = smc91x_resources,
+};
+
+static struct platform_device *tepla_devices[] __initdata = {
+       &smc91x_device,
+};
+
+static int __init tepla_init(void)
+{
+       printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+       return platform_add_devices(tepla_devices, ARRAY_SIZE(tepla_devices));
+}
+
+arch_initcall(tepla_init);