#include <asm/io.h>
#include <asm/apm.h>
#include <asm/adc.h>
-#include <asm/hp6xx/hp6xx.h>
+#include <asm/hp6xx.h>
#define SH7709_PGDR 0xa400012c
#include <linux/time.h>
#include <asm/io.h>
#include <asm/hd64461.h>
-#include <asm/hp6xx/hp6xx.h>
+#include <asm/hp6xx.h>
#include <asm/cpu/dac.h>
#include <asm/pm.h>
#include <asm/hd64461.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/hp6xx/hp6xx.h>
+#include <asm/hp6xx.h>
#include <asm/cpu/dac.h>
#define SCPCR 0xa4000116
#include <linux/module.h>
#include <linux/pci.h>
#include <asm/io.h>
-#include <asm/hs7751rvoip/hs7751rvoip.h>
+#include <asm/hs7751rvoip.h>
#include <asm/addrspace.h>
extern void *area6_io8_base; /* Area 6 8bit I/O Base address */
#include <linux/irq.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/hs7751rvoip/hs7751rvoip.h>
+#include <asm/hs7751rvoip.h>
static int mask_pos[] = {8, 9, 10, 11, 12, 13, 0, 1, 2, 3, 4, 5, 6, 7};
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
#include <linux/pm.h>
+#include <asm/hs7751rvoip.h>
#include <asm/io.h>
-#include <asm/hs7751rvoip/hs7751rvoip.h>
#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/irq.h>
static void __init hs7751rvoip_init_irq(void)
{
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <asm/r7780rp/r7780rp.h>
+#include <asm/r7780rp.h>
#include <asm/addrspace.h>
#include <asm/io.h>
*/
#include <linux/init.h>
#include <linux/irq.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <asm/r7780rp.h>
#ifdef CONFIG_SH_R7780MP
static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0};
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
-#include <asm/r7780rp/r7780rp.h>
+#include <asm/r7780rp.h>
#include <asm/clock.h>
#include <asm/io.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
-#include <asm/rts7751r2d/rts7751r2d.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <asm/rts7751r2d.h>
#include <asm/addrspace.h>
/*
* Modified for RTS7751R2D by
* Atom Create Engineering Co., Ltd. 2002.
*/
-
#include <linux/init.h>
#include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/rts7751r2d/rts7751r2d.h>
+#include <linux/io.h>
+#include <asm/rts7751r2d.h>
#if defined(CONFIG_RTS7751R2D_REV11)
static int mask_pos[] = {11, 9, 8, 12, 10, 6, 5, 4, 7, 14, 13, 0, 0, 0, 0};
*
* This file contains Renesas Technology Sales RTS7751R2D specific LED code.
*/
-
-#include <asm/io.h>
-#include <asm/rts7751r2d/rts7751r2d.h>
-
-#ifdef CONFIG_HEARTBEAT
-
+#include <linux/io.h>
#include <linux/sched.h>
+#include <asm/rts7751r2d.h>
/* Cycle the LED's in the clasic Knightriger/Sun pattern */
void heartbeat_rts7751r2d(void)
else
bit--;
}
-#endif /* CONFIG_HEARTBEAT */
-
-void rts7751r2d_led(unsigned short value)
-{
- ctrl_outw(value, PA_OUTPORT);
-}
-
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/pm.h>
-#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/mach/rts7751r2d.h>
+#include <asm/io.h>
#include <asm/voyagergx.h>
extern void heartbeat_rts7751r2d(void);
*/
#include <linux/init.h>
#include <asm/machvec.h>
-#include <asm/shmin/shmin.h>
+#include <asm/shmin.h>
#include <asm/clock.h>
#include <asm/irq.h>
#include <asm/io.h>
Copyright 2003 (c) Lineo uSolutions,Inc.
*/
-/* -------------------------------------------------------------------- */
-
-#undef DEBUG
-
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <linux/io.h>
#include <asm/voyagergx.h>
+#include <asm/rts7751r2d.h>
static void disable_voyagergx_irq(unsigned int irq)
{
unsigned long val;
unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
- pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask);
+ pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask);
val = inl(VOYAGER_INT_MASK);
val &= ~mask;
outl(val, VOYAGER_INT_MASK);
unsigned long val;
unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
- pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask);
+ pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask);
val = inl(VOYAGER_INT_MASK);
val |= mask;
outl(val, VOYAGER_INT_MASK);
} else {
printk("Unexpected IRQ irq = %d status = 0x%08lx\n", irq, val);
}
- pr_debug("voyagergx_irq_demux %d \n", i);
+ pr_debug("voyagergx_irq_demux %ld\n", i);
#else
for (bit = 1, i = 0 ; i < VOYAGER_IRQ_NUM ; bit <<= 1, i++)
if (val & bit)
setup_irq(IRQ_VOYAGER, &irq0);
}
-
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
-#include <asm/r7780rp/r7780rp.h>
+#include <asm/r7780rp.h>
#include <asm/io.h>
#include "pci-sh4.h"
*
* PCI initialization for the Renesas SH7751R RTS7751R2D board
*/
-
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
-#include <linux/delay.h>
#include <linux/pci.h>
-#include <linux/module.h>
-#include <asm/rts7751r2d/rts7751r2d.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <asm/rts7751r2d.h>
#include "pci-sh4.h"
+static u8 rts7751r2d_irq_tab[] __initdata = {
+ IRQ_PCISLOT1,
+ IRQ_PCISLOT2,
+ IRQ_PCMCIA,
+ IRQ_PCIETH,
+};
+
int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
- switch (slot) {
- case 0: return IRQ_PCISLOT1; /* PCI Extend slot #1 */
- case 1: return IRQ_PCISLOT2; /* PCI Extend slot #2 */
- case 2: return IRQ_PCMCIA; /* PCI Cardbus Bridge */
- case 3: return IRQ_PCIETH; /* Realtek Ethernet controller */
- default:
- printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
- return -1;
- }
+ return rts7751r2d_irq_tab[slot];
}
static struct resource sh7751_io_resource = {
#include <asm/io.h>
#include <asm/delay.h>
#include <asm/adc.h>
-#include <asm/hp6xx/hp6xx.h>
+#include <asm/hp6xx.h>
#define MODNAME "hp680_ts_input"
#include <asm/io.h>
#include <asm/hd64461.h>
#include <asm/cpu/dac.h>
-#include <asm/hp6xx/hp6xx.h>
#define WIDTH 640
+++ /dev/null
-/*
- * include/asm-sh/edosk7705/io.h
- *
- * Modified version of io_se.h for the EDOSK7705 specific functions.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * IO functions for an Hitachi EDOSK7705 development board
- */
-
-#ifndef __ASM_SH_EDOSK7705_IO_H
-#define __ASM_SH_EDOSK7705_IO_H
-
-#include <asm/io_generic.h>
-
-extern unsigned char sh_edosk7705_inb(unsigned long port);
-extern unsigned int sh_edosk7705_inl(unsigned long port);
-
-extern void sh_edosk7705_outb(unsigned char value, unsigned long port);
-extern void sh_edosk7705_outl(unsigned int value, unsigned long port);
-
-extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count);
-extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count);
-extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset);
-
-#endif /* __ASM_SH_EDOSK7705_IO_H */
+++ /dev/null
-#ifndef __ASM_SH_HP6XX_H
-#define __ASM_SH_HP6XX_H
-
-/*
- * Copyright (C) 2003, 2004, 2005 Andriy Skulysh
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#define HP680_BTN_IRQ IRQ0_IRQ
-#define HP680_TS_IRQ IRQ3_IRQ
-#define HP680_HD64461_IRQ IRQ4_IRQ
-
-#define DAC_LCD_BRIGHTNESS 0
-#define DAC_SPEAKER_VOLUME 1
-
-#define PGDR_OPENED 0x01
-#define PGDR_MAIN_BATTERY_OUT 0x04
-#define PGDR_PLAY_BUTTON 0x08
-#define PGDR_REWIND_BUTTON 0x10
-#define PGDR_RECORD_BUTTON 0x20
-
-#define PHDR_TS_PEN_DOWN 0x08
-
-#define PJDR_LED_BLINK 0x02
-
-#define PKDR_LED_GREEN 0x10
-
-#define SCPDR_TS_SCAN_ENABLE 0x20
-#define SCPDR_TS_SCAN_Y 0x02
-#define SCPDR_TS_SCAN_X 0x01
-
-#define SCPCR_TS_ENABLE 0x405
-#define SCPCR_TS_MASK 0xc0f
-
-#define ADC_CHANNEL_TS_Y 1
-#define ADC_CHANNEL_TS_X 2
-#define ADC_CHANNEL_BATTERY 3
-#define ADC_CHANNEL_BACKUP 4
-#define ADC_CHANNEL_CHARGE 5
-
-#define HD64461_GPADR_SPEAKER 0x01
-#define HD64461_GPADR_PCMCIA0 (0x02|0x08)
-
-#define HD64461_GPBDR_LCDOFF 0x01
-#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78
-#define HD64461_GPBDR_LED_RED 0x80
-
-#include <asm/hd64461.h>
-#include <asm/io.h>
-
-#define PJDR 0xa4000130
-#define PKDR 0xa4000132
-
-static inline void hp6xx_led_red(int on)
-{
- u16 v16;
- v16 = ctrl_inw(CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
- if (on)
- ctrl_outw(v16 & (~HD64461_GPBDR_LED_RED), CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
- else
- ctrl_outw(v16 | HD64461_GPBDR_LED_RED, CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
-}
-
-static inline void hp6xx_led_green(int on)
-{
- u8 v8;
-
- v8 = ctrl_inb(PKDR);
- if (on)
- ctrl_outb(v8 & (~PKDR_LED_GREEN), PKDR);
- else
- ctrl_outb(v8 | PKDR_LED_GREEN, PKDR);
-}
-
-
-#endif /* __ASM_SH_HP6XX_H */
+++ /dev/null
-#ifndef __ASM_SH_HP6XX_IO_H
-#define __ASM_SH_HP6XX_IO_H
-
-/*
- * Nothing special here.. just use the generic cchip io routines.
- */
-#include <asm/hd64461.h>
-
-#endif /* __ASM_SH_HP6XX_IO_H */
-
+++ /dev/null
-#ifndef __ASM_SH_RENESAS_HS7751RVOIP_H
-#define __ASM_SH_RENESAS_HS7751RVOIP_H
-
-/*
- * linux/include/asm-sh/hs7751rvoip/hs7751rvoip.h
- *
- * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
- *
- * Renesas Technology Sales HS7751RVoIP support
- */
-
-/* Box specific addresses. */
-
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_SLICCNTR1 0xa4000006 /* SLIC PIO Control 1 */
-#define PA_SLICCNTR2 0xa4000008 /* SLIC PIO Control 2 */
-#define PA_DMACNTR 0xa400000a /* USB DMA Control */
-#define PA_INPORTR 0xa400000c /* Input Port Register */
-#define PA_OUTPORTR 0xa400000e /* Output Port Reguster */
-#define PA_VERREG 0xa4000014 /* FPGA Version Register */
-
-#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-#define IRLCNTR2 (PA_BCR + 2) /* Interrupt Control Register2 */
-#define IRLCNTR3 (PA_BCR + 4) /* Interrupt Control Register3 */
-#define IRLCNTR4 (PA_BCR + 16) /* Interrupt Control Register4 */
-#define IRLCNTR5 (PA_BCR + 18) /* Interrupt Control Register5 */
-
-#define IRQ_PCIETH 6 /* PCI Ethernet IRQ */
-#define IRQ_PCIHUB 7 /* PCI Ethernet Hub IRQ */
-#define IRQ_USBCOM 8 /* USB Comunication IRQ */
-#define IRQ_USBCON 9 /* USB Connect IRQ */
-#define IRQ_USBDMA 10 /* USB DMA IRQ */
-#define IRQ_CFCARD 11 /* CF Card IRQ */
-#define IRQ_PCMCIA 12 /* PCMCIA IRQ */
-#define IRQ_PCISLOT 13 /* PCI Slot #1 IRQ */
-#define IRQ_ONHOOK1 0 /* ON HOOK1 IRQ */
-#define IRQ_OFFHOOK1 1 /* OFF HOOK1 IRQ */
-#define IRQ_ONHOOK2 2 /* ON HOOK2 IRQ */
-#define IRQ_OFFHOOK2 3 /* OFF HOOK2 IRQ */
-#define IRQ_RINGING 4 /* Ringing IRQ */
-#define IRQ_CODEC 5 /* CODEC IRQ */
-
-#define __IO_PREFIX hs7751rvoip
-#include <asm/io_generic.h>
-
-/* arch/sh/boards/renesas/hs7751rvoip/irq.c */
-void init_hs7751rvoip_IRQ(void);
-
-/* arch/sh/boards/renesas/hs7751rvoip/io.c */
-void *hs7751rvoip_ioremap(unsigned long, unsigned long);
-
-#endif /* __ASM_SH_RENESAS_HS7751RVOIP */
+++ /dev/null
-#ifndef __ASM_SH_RENESAS_R7780RP_H
-#define __ASM_SH_RENESAS_R7780RP_H
-
-/*
- * linux/include/asm-sh/r7780rp.h
- *
- * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
- *
- * Renesas Solutions Highlander R7780RP support
- */
-
-/* Box specific addresses. */
-#if defined(CONFIG_SH_R7780MP)
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
-#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
-#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */
-#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */
-#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */
-#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */
-#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */
-#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */
-#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */
-#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */
-#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */
-#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */
-#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */
-#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */
-#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */
-#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
-#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
-#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
-#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
-#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
-#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
-#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */
-#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
-#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
-#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
-#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */
-#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */
-#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */
-#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
-#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */
-#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
-#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */
-#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
-#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
-#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */
-#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */
-#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */
-#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */
-#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */
-#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */
-#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
-#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */
-#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
-#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */
-#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
-#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
-#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */
-#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */
-#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */
-#define PA_ICCR (PA_BCR+0x0600) /* Serial control */
-#define PA_SAR (PA_BCR+0x0602) /* Serial Slave control */
-#define PA_MDR (PA_BCR+0x0604) /* Serial Mode control */
-#define PA_ADR1 (PA_BCR+0x0606) /* Serial Address1 control */
-#define PA_DAR1 (PA_BCR+0x0646) /* Serial Data1 control */
-#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */
-#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */
-#define PA_PMR (PA_BCR+0x0900) /* */
-
-#define PA_AX88796L 0xa4100400 /* AX88796L Area */
-#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
-#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */
-#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */
-#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
-#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-
-#define IRQ_PCISLOT1 65 /* PCI Slot #1 IRQ */
-#define IRQ_PCISLOT2 66 /* PCI Slot #2 IRQ */
-#define IRQ_PCISLOT3 67 /* PCI Slot #3 IRQ */
-#define IRQ_PCISLOT4 68 /* PCI Slot #4 IRQ */
-#define IRQ_CFCARD 1 /* CF Card IRQ */
-// #define IRQ_CFINST 0 /* CF Card Insert IRQ */
-#define IRQ_TP 2 /* Touch Panel IRQ */
-#define IRQ_SCI1 3 /* SCI1 IRQ */
-#define IRQ_SCI0 4 /* SCI0 IRQ */
-#define IRQ_2SERIAL 5 /* Serial IRQ */
-#define IRQ_RTC 6 /* RTC A / B IRQ */
-#define IRQ_EXTENTION6 7 /* EXT6n IRQ */
-#define IRQ_EXTENTION5 8 /* EXT5n IRQ */
-#define IRQ_EXTENTION4 9 /* EXT4n IRQ */
-#define IRQ_EXTENTION2 10 /* EXT2n IRQ */
-#define IRQ_EXTENTION1 11 /* EXT1n IRQ */
-#define IRQ_ONETH 13 /* On board Ethernet IRQ */
-#define IRQ_PSW 14 /* Push Switch IRQ */
-
-#else /* R7780RP */
-
-#define PA_BCR 0xa5000000 /* FPGA */
-#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
-#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
-#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */
-#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */
-#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */
-#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */
-#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */
-#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */
-#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */
-#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */
-#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */
-#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */
-#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */
-#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */
-#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */
-#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
-#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
-#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
-#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
-#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
-#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
-#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */
-#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */
-#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */
-#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
-#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
-#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
-#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */
-#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */
-#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */
-#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */
-#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */
-#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */
-#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */
-#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */
-#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */
-#define PA_ICCR (PA_BCR+0x0500) /* Serial control */
-#define PA_SAR (PA_BCR+0x0502) /* Serial Slave control */
-#define PA_MDR (PA_BCR+0x0504) /* Serial Mode control */
-#define PA_ADR1 (PA_BCR+0x0506) /* Serial Address1 control */
-#define PA_DAR1 (PA_BCR+0x0546) /* Serial Data1 control */
-#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */
-
-#define PA_AX88796L 0xa5800400 /* AX88796L Area */
-#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
-#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */
-#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */
-#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
-#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-
-#define IRQ_PCISLOT1 0 /* PCI Slot #1 IRQ */
-#define IRQ_PCISLOT2 1 /* PCI Slot #2 IRQ */
-#define IRQ_PCISLOT3 2 /* PCI Slot #3 IRQ */
-#define IRQ_PCISLOT4 3 /* PCI Slot #4 IRQ */
-#define IRQ_CFCARD 4 /* CF Card IRQ */
-#define IRQ_CFINST 5 /* CF Card Insert IRQ */
-#define IRQ_M66596 6 /* M66596 IRQ */
-#define IRQ_SDCARD 7 /* SD Card IRQ */
-#define IRQ_TUCHPANEL 8 /* Touch Panel IRQ */
-#define IRQ_SCI 9 /* SCI IRQ */
-#define IRQ_2SERIAL 10 /* Serial IRQ */
-#define IRQ_EXTENTION 11 /* EXTn IRQ */
-#define IRQ_ONETH 12 /* On board Ethernet IRQ */
-#define IRQ_PSW 13 /* Push Switch IRQ */
-#define IRQ_ZIGBEE 14 /* Ziggbee IO IRQ */
-
-#endif /* CONFIG_SH_R7780MP */
-
-#define __IO_PREFIX r7780rp
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_RENESAS_R7780RP */
+++ /dev/null
-#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
-#define __ASM_SH_RENESAS_RTS7751R2D_H
-
-/*
- * linux/include/asm-sh/renesas_rts7751r2d.h
- *
- * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
- *
- * Renesas Technology Sales RTS7751R2D support
- */
-
-/* Box specific addresses. */
-
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_IRLMON 0xa4000002 /* Interrupt Status control */
-#define PA_CFCTL 0xa4000004 /* CF Timing control */
-#define PA_CFPOW 0xa4000006 /* CF Power control */
-#define PA_DISPCTL 0xa4000008 /* Display Timing control */
-#define PA_SDMPOW 0xa400000a /* SD Power control */
-#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */
-#define PA_PCICD 0xa400000e /* PCI Extention detect control */
-#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */
-#if defined(CONFIG_RTS7751R2D_REV11)
-#define PA_AXRST 0xa4000022 /* AX_LAN Reset control */
-#define PA_CFRST 0xa4000024 /* CF Reset control */
-#define PA_ADMRTS 0xa4000026 /* SD Reset control */
-#define PA_EXTRST 0xa4000028 /* Extention Reset control */
-#define PA_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */
-#else
-#define PA_CFRST 0xa4000022 /* CF Reset control */
-#define PA_ADMRTS 0xa4000024 /* SD Reset control */
-#define PA_EXTRST 0xa4000026 /* Extention Reset control */
-#define PA_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */
-#define PA_KEYCTLCLR 0xa400002a /* Key Interrupt clear */
-#endif
-#define PA_POWOFF 0xa4000030 /* Board Power OFF control */
-#define PA_VERREG 0xa4000032 /* FPGA Version Register */
-#define PA_INPORT 0xa4000034 /* KEY Input Port control */
-#define PA_OUTPORT 0xa4000036 /* LED control */
-#define PA_DMPORT 0xa4000038 /* DM270 Output Port control */
-
-#define PA_AX88796L 0xaa000400 /* AX88796L Area */
-#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */
-#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
-#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-
-#if defined(CONFIG_RTS7751R2D_REV11)
-#define IRQ_PCIETH 0 /* PCI Ethernet IRQ */
-#define IRQ_CFCARD 1 /* CF Card IRQ */
-#define IRQ_CFINST 2 /* CF Card Insert IRQ */
-#define IRQ_PCMCIA 3 /* PCMCIA IRQ */
-#define IRQ_VOYAGER 4 /* VOYAGER IRQ */
-#define IRQ_ONETH 5 /* On board Ethernet IRQ */
-#else
-#define IRQ_KEYIN 0 /* Key Input IRQ */
-#define IRQ_PCIETH 1 /* PCI Ethernet IRQ */
-#define IRQ_CFCARD 2 /* CF Card IRQ */
-#define IRQ_CFINST 3 /* CF Card Insert IRQ */
-#define IRQ_PCMCIA 4 /* PCMCIA IRQ */
-#define IRQ_VOYAGER 5 /* VOYAGER IRQ */
-#endif
-#define IRQ_RTCALM 6 /* RTC Alarm IRQ */
-#define IRQ_RTCTIME 7 /* RTC Timer IRQ */
-#define IRQ_SDCARD 8 /* SD Card IRQ */
-#define IRQ_PCISLOT1 9 /* PCI Slot #1 IRQ */
-#define IRQ_PCISLOT2 10 /* PCI Slot #2 IRQ */
-#define IRQ_EXTENTION 11 /* EXTn IRQ */
-
-#define __IO_PREFIX rts7751r2d
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_RENESAS_RTS7751R2D */
+++ /dev/null
-#ifndef __ASM_SH_SHMIN_H
-#define __ASM_SH_SHMIN_H
-
-#define SHMIN_IO_BASE 0xb0000000UL
-
-#define SHMIN_NE_IRQ IRQ2_IRQ
-#define SHMIN_NE_BASE 0x300
-
-#endif
#include <asm/cpu/dac.h>
#include <asm/cpu/timer.h>
#include <asm/machvec.h>
-#include <asm/hp6xx/hp6xx.h>
+#include <asm/hp6xx.h>
#include <asm/hd64461.h>
#define MODNAME "sh_dac_audio"
projects / linux-2.6 / commitdiff