]> err.no Git - linux-2.6/commitdiff
mac80211: A-MPDU Rx adding basic functionality
authorRon Rindjunsky <ron.rindjunsky@intel.com>
Tue, 25 Dec 2007 15:00:33 +0000 (17:00 +0200)
committerDavid S. Miller <davem@davemloft.net>
Mon, 28 Jan 2008 23:00:59 +0000 (15:00 -0800)
This patch adds the basic needed abilities and functions for A-MPDU Rx session
changed functions:
 - ieee80211_sta_process_addba_request - Rx A-MPDU initialization enabled
 - ieee80211_stop - stops all A-MPDU Rx in case interface goes down
added functions:
 - ieee80211_send_delba - used for sending out Del BA in A-MPDU sessions
 - ieee80211_sta_stop_rx_BA_session - stopping Rx A-MPDU session
 - sta_rx_agg_session_timer_expired - stops A-MPDU Rx use if load is too
low

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
include/linux/ieee80211.h
net/mac80211/ieee80211.c
net/mac80211/ieee80211_i.h
net/mac80211/ieee80211_sta.c
net/mac80211/sta_info.c

index 3e641590d0c87230444b33edee732323bc4e0771..4d5a4c9dcba7ee1f02571a10db37a781857cdff9 100644 (file)
@@ -472,6 +472,13 @@ enum ieee80211_back_actioncode {
        WLAN_ACTION_DELBA = 2,
 };
 
+/* BACK (block-ack) parties */
+enum ieee80211_back_parties {
+       WLAN_BACK_RECIPIENT = 0,
+       WLAN_BACK_INITIATOR = 1,
+       WLAN_BACK_TIMER = 2,
+};
+
 /* A-MSDU 802.11n */
 #define IEEE80211_QOS_CONTROL_A_MSDU_PRESENT 0x0080
 
index 9c14e3d303c549229eccc6d922350e87670ce9fb..2011c726f2b187d8fcb964e5ebf30d11a0ae03eb 100644 (file)
@@ -292,9 +292,18 @@ static int ieee80211_stop(struct net_device *dev)
        struct ieee80211_sub_if_data *sdata;
        struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
        struct ieee80211_if_init_conf conf;
+       struct sta_info *sta;
+       int i;
 
        sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
+       list_for_each_entry(sta, &local->sta_list, list) {
+               for (i = 0; i <  STA_TID_NUM; i++)
+                       ieee80211_sta_stop_rx_ba_session(sta->dev, sta->addr,
+                                               i, WLAN_BACK_RECIPIENT,
+                                               WLAN_REASON_QSTA_LEAVE_QBSS);
+       }
+
        netif_stop_queue(dev);
 
        /*
index baf53c047127d0d08db6d127744b56e0a2806e60..740d69d5bbd30014a7ece672ef54d0bc4659b42a 100644 (file)
@@ -767,6 +767,9 @@ int ieee80211_ht_cap_ie_to_ht_info(struct ieee80211_ht_cap *ht_cap_ie,
 int ieee80211_ht_addt_info_ie_to_ht_bss_info(
                        struct ieee80211_ht_addt_info *ht_add_info_ie,
                        struct ieee80211_ht_bss_info *bss_info);
+void ieee80211_sta_stop_rx_ba_session(struct net_device *dev, u8 *da,
+                               u16 tid, u16 initiator, u16 reason);
+void sta_rx_agg_session_timer_expired(unsigned long data);
 /* ieee80211_iface.c */
 int ieee80211_if_add(struct net_device *dev, const char *name,
                     struct net_device **new_dev, int type);
index 5b8f484c1673ac091ddd2f866ae73b5a933b7cd5..d5a7683fab3a395531b8f85d5c53f7b3bcc2bc26 100644 (file)
 #define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
 #define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFA0
 
+/* next values represent the buffer size for A-MPDU frame.
+ * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2) */
+#define IEEE80211_MIN_AMPDU_BUF 0x8
+#define IEEE80211_MAX_AMPDU_BUF 0x40
+
 static void ieee80211_send_probe_req(struct net_device *dev, u8 *dst,
                                     u8 *ssid, size_t ssid_len);
 static struct ieee80211_sta_bss *
@@ -1005,7 +1010,8 @@ static void ieee80211_send_addba_resp(struct net_device *dev, u8 *da, u16 tid,
        struct ieee80211_mgmt *mgmt;
        u16 capab;
 
-       skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
+       skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom + 1 +
+                                       sizeof(mgmt->u.action.u.addba_resp));
        if (!skb) {
                printk(KERN_DEBUG "%s: failed to allocate buffer "
                       "for addba resp frame\n", dev->name);
@@ -1047,9 +1053,14 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev,
                                                size_t len)
 {
        struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+       struct ieee80211_hw *hw = &local->hw;
+       struct ieee80211_conf *conf = &hw->conf;
        struct sta_info *sta;
-       u16 capab, tid, timeout, ba_policy, buf_size, status;
+       struct tid_ampdu_rx *tid_agg_rx;
+       u16 capab, tid, timeout, ba_policy, buf_size, start_seq_num, status;
        u8 dialog_token;
+       int ret = -EOPNOTSUPP;
+       DECLARE_MAC_BUF(mac);
 
        sta = sta_info_get(local, mgmt->sa);
        if (!sta)
@@ -1058,28 +1069,216 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev,
        /* extract session parameters from addba request frame */
        dialog_token = mgmt->u.action.u.addba_req.dialog_token;
        timeout = le16_to_cpu(mgmt->u.action.u.addba_req.timeout);
+       start_seq_num =
+               le16_to_cpu(mgmt->u.action.u.addba_req.start_seq_num) >> 4;
 
        capab = le16_to_cpu(mgmt->u.action.u.addba_req.capab);
        ba_policy = (capab & IEEE80211_ADDBA_PARAM_POLICY_MASK) >> 1;
        tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
        buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
 
-       /* TODO - currently aggregation is declined (A-MPDU add BA request
-       * acceptance is not obligatory by 802.11n draft), but here is
-       * the entry point for dealing with it */
-#ifdef MAC80211_HT_DEBUG
-       if (net_ratelimit())
-               printk(KERN_DEBUG "Add Block Ack request arrived,"
-                                  " currently denying it\n");
-#endif /* MAC80211_HT_DEBUG */
-
        status = WLAN_STATUS_REQUEST_DECLINED;
 
+       /* sanity check for incoming parameters:
+        * check if configuration can support the BA policy
+        * and if buffer size does not exceeds max value */
+       if (((ba_policy != 1)
+               && (!(conf->ht_conf.cap & IEEE80211_HT_CAP_DELAY_BA)))
+               || (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
+               status = WLAN_STATUS_INVALID_QOS_PARAM;
+#ifdef CONFIG_MAC80211_HT_DEBUG
+               if (net_ratelimit())
+                       printk(KERN_DEBUG "Block Ack Req with bad params from "
+                               "%s on tid %u. policy %d, buffer size %d\n",
+                               print_mac(mac, mgmt->sa), tid, ba_policy,
+                               buf_size);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+               goto end_no_lock;
+       }
+       /* determine default buffer size */
+       if (buf_size == 0) {
+               struct ieee80211_hw_mode *mode = conf->mode;
+               buf_size = IEEE80211_MIN_AMPDU_BUF;
+               buf_size = buf_size << mode->ht_info.ampdu_factor;
+       }
+
+       tid_agg_rx = &sta->ampdu_mlme.tid_rx[tid];
+
+       /* examine state machine */
+       spin_lock_bh(&sta->ampdu_mlme.ampdu_rx);
+
+       if (tid_agg_rx->state != HT_AGG_STATE_IDLE) {
+#ifdef CONFIG_MAC80211_HT_DEBUG
+               if (net_ratelimit())
+                       printk(KERN_DEBUG "unexpected Block Ack Req from "
+                               "%s on tid %u\n",
+                               print_mac(mac, mgmt->sa), tid);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+               goto end;
+       }
+
+       /* prepare reordering buffer */
+       tid_agg_rx->reorder_buf =
+               kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC);
+       if ((!tid_agg_rx->reorder_buf) && net_ratelimit()) {
+               printk(KERN_ERR "can not allocate reordering buffer "
+                                               "to tid %d\n", tid);
+               goto end;
+       }
+       memset(tid_agg_rx->reorder_buf, 0,
+               buf_size * sizeof(struct sk_buf *));
+
+       if (local->ops->ampdu_action)
+               ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START,
+                                              sta->addr, tid, start_seq_num);
+#ifdef CONFIG_MAC80211_HT_DEBUG
+       printk(KERN_DEBUG "Rx A-MPDU on tid %d result %d", tid, ret);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+
+       if (ret) {
+               kfree(tid_agg_rx->reorder_buf);
+               goto end;
+       }
+
+       /* change state and send addba resp */
+       tid_agg_rx->state = HT_AGG_STATE_OPERATIONAL;
+       tid_agg_rx->dialog_token = dialog_token;
+       tid_agg_rx->ssn = start_seq_num;
+       tid_agg_rx->head_seq_num = start_seq_num;
+       tid_agg_rx->buf_size = buf_size;
+       tid_agg_rx->timeout = timeout;
+       tid_agg_rx->stored_mpdu_num = 0;
+       status = WLAN_STATUS_SUCCESS;
+end:
+       spin_unlock_bh(&sta->ampdu_mlme.ampdu_rx);
+
+end_no_lock:
        ieee80211_send_addba_resp(sta->dev, sta->addr, tid, dialog_token,
                                status, 1, buf_size, timeout);
        sta_info_put(sta);
 }
 
+void ieee80211_send_delba(struct net_device *dev, const u8 *da, u16 tid,
+                               u16 initiator, u16 reason_code)
+{
+       struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+       struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+       struct ieee80211_if_sta *ifsta = &sdata->u.sta;
+       struct sk_buff *skb;
+       struct ieee80211_mgmt *mgmt;
+       u16 params;
+
+       skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom + 1 +
+                                       sizeof(mgmt->u.action.u.delba));
+
+       if (!skb) {
+               printk(KERN_ERR "%s: failed to allocate buffer "
+                                       "for delba frame\n", dev->name);
+               return;
+       }
+
+       skb_reserve(skb, local->hw.extra_tx_headroom);
+       mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
+       memset(mgmt, 0, 24);
+       memcpy(mgmt->da, da, ETH_ALEN);
+       memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+       if (sdata->type == IEEE80211_IF_TYPE_AP)
+               memcpy(mgmt->bssid, dev->dev_addr, ETH_ALEN);
+       else
+               memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
+       mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
+                                       IEEE80211_STYPE_ACTION);
+
+       skb_put(skb, 1 + sizeof(mgmt->u.action.u.delba));
+
+       mgmt->u.action.category = WLAN_CATEGORY_BACK;
+       mgmt->u.action.u.delba.action_code = WLAN_ACTION_DELBA;
+       params = (u16)(initiator << 11);        /* bit 11 initiator */
+       params |= (u16)(tid << 12);             /* bit 15:12 TID number */
+
+       mgmt->u.action.u.delba.params = cpu_to_le16(params);
+       mgmt->u.action.u.delba.reason_code = cpu_to_le16(reason_code);
+
+       ieee80211_sta_tx(dev, skb, 0);
+}
+
+void ieee80211_sta_stop_rx_ba_session(struct net_device *dev, u8 *ra, u16 tid,
+                                       u16 initiator, u16 reason)
+{
+       struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+       struct ieee80211_hw *hw = &local->hw;
+       struct sta_info *sta;
+       int ret;
+
+       sta = sta_info_get(local, ra);
+       if (!sta)
+               return;
+
+       /* check if TID is in operational state */
+       spin_lock_bh(&sta->ampdu_mlme.ampdu_rx);
+       if (sta->ampdu_mlme.tid_rx[tid].state
+                               != HT_AGG_STATE_OPERATIONAL) {
+               spin_unlock_bh(&sta->ampdu_mlme.ampdu_rx);
+               if (net_ratelimit())
+                       printk(KERN_DEBUG "rx BA session requested to stop on "
+                               "inactive tid %d\n", tid);
+               sta_info_put(sta);
+               return;
+       }
+       sta->ampdu_mlme.tid_rx[tid].state =
+               HT_AGG_STATE_REQ_STOP_BA_MSK |
+               (initiator << HT_AGG_STATE_INITIATOR_SHIFT);
+               spin_unlock_bh(&sta->ampdu_mlme.ampdu_rx);
+
+       /* stop HW Rx aggregation. ampdu_action existence
+        * already verified in session init so we add the BUG_ON */
+       BUG_ON(!local->ops->ampdu_action);
+
+       ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_STOP,
+                                       ra, tid, EINVAL);
+       if (ret)
+               printk(KERN_DEBUG "HW problem - can not stop rx "
+                               "aggergation for tid %d\n", tid);
+
+       /* shutdown timer has not expired */
+       if (initiator != WLAN_BACK_TIMER)
+               del_timer_sync(&sta->ampdu_mlme.tid_rx[tid].
+                                       session_timer);
+
+       /* check if this is a self generated aggregation halt */
+       if (initiator == WLAN_BACK_RECIPIENT || initiator == WLAN_BACK_TIMER)
+               ieee80211_send_delba(dev, ra, tid, 0, reason);
+
+       /* free the reordering buffer */
+       kfree(sta->ampdu_mlme.tid_rx[tid].reorder_buf);
+
+       sta->ampdu_mlme.tid_rx[tid].state = HT_AGG_STATE_IDLE;
+       sta_info_put(sta);
+}
+
+/*
+ * After receiving Block Ack Request (BAR) we activated a
+ * timer after each frame arrives from the originator.
+ * if this timer expires ieee80211_sta_stop_rx_ba_session will be executed.
+ */
+void sta_rx_agg_session_timer_expired(unsigned long data)
+{
+       /* not an elegant detour, but there is no choice as the timer passes
+        * only one argument, and verious sta_info are needed here, so init
+        * flow in sta_info_add gives the TID as data, while the timer_to_id
+        * array gives the sta through container_of */
+       u8 *ptid = (u8 *)data;
+       u8 *timer_to_id = ptid - *ptid;
+       struct sta_info *sta = container_of(timer_to_id, struct sta_info,
+                                        timer_to_tid[0]);
+
+       printk(KERN_DEBUG "rx session timer expired on tid %d\n", (u16)*ptid);
+       ieee80211_sta_stop_rx_ba_session(sta->dev, sta->addr, (u16)*ptid,
+                                        WLAN_BACK_TIMER,
+                                        WLAN_REASON_QSTA_TIMEOUT);
+}
+
+
 static void ieee80211_rx_mgmt_auth(struct net_device *dev,
                                   struct ieee80211_if_sta *ifsta,
                                   struct ieee80211_mgmt *mgmt,
index ffe8a49d89273b47de10673516ed828c19d8d781..60ca07804056c7a00f1d4f6bb2c996347007c7bd 100644 (file)
@@ -104,6 +104,7 @@ static void sta_info_release(struct kref *kref)
        struct sta_info *sta = container_of(kref, struct sta_info, kref);
        struct ieee80211_local *local = sta->local;
        struct sk_buff *skb;
+       int i;
 
        /* free sta structure; it has already been removed from
         * hash table etc. external structures. Make sure that all
@@ -116,6 +117,8 @@ static void sta_info_release(struct kref *kref)
        while ((skb = skb_dequeue(&sta->tx_filtered)) != NULL) {
                dev_kfree_skb_any(skb);
        }
+       for (i = 0; i <  STA_TID_NUM; i++)
+               del_timer_sync(&sta->ampdu_mlme.tid_rx[i].session_timer);
        rate_control_free_sta(sta->rate_ctrl, sta->rate_ctrl_priv);
        rate_control_put(sta->rate_ctrl);
        kfree(sta);