* Remove never finished and bogus 24/32bit support
* Clean up macro abuse
* Minor tidying for format.
+ * 12/2006 Helge Deller <deller@gmx.de>
+ * add /sys/class/graphics/fbX/vgapass sysfs-interface
+ * add module option "mode_option" to set initial screen mode
+ * use fbdev default videomode database
+ * remove debug functions from ioctl
*/
/*
*
* sstfb specific ioctls:
* toggle vga (0x46db) : toggle vga_pass_through
- * fill fb (0x46dc) : fills fb
- * test disp (0x46de) : draws a test image
*/
#undef SST_DEBUG
-/*
- Default video mode .
- 0 800x600@60 took from glide
- 1 640x480@75 took from glide
- 2 1024x768@76 std fb.mode
- 3 640x480@60 glide default */
-#define DEFAULT_MODE 3
/*
* Includes
#include <linux/init.h>
#include <linux/slab.h>
#include <asm/io.h>
-#include <asm/ioctl.h>
#include <asm/uaccess.h>
#include <video/sstfb.h>
/* initialized by setup */
-static int vgapass; /* enable Vga passthrough cable */
+static int vgapass; /* enable VGA passthrough cable */
static int mem; /* mem size in MB, 0 = autodetect */
static int clipping = 1; /* use clipping (slower, safer) */
static int gfxclk; /* force FBI freq in Mhz . Dangerous */
static int slowpci; /* slow PCI settings */
-static char *mode_option __devinitdata;
+/*
+ Possible default video modes: 800x600@60, 640x480@75, 1024x768@76, 640x480@60
+*/
+#define DEFAULT_VIDEO_MODE "640x480@60"
+
+static char *mode_option __devinitdata = DEFAULT_VIDEO_MODE;
enum {
ID_VOODOO1 = 0,
{ .name = "Voodoo2", .default_gfx_clock = 75000, .max_gfxclk = 85 },
};
-static struct fb_var_screeninfo sstfb_default =
-#if ( DEFAULT_MODE == 0 )
- { /* 800x600@60, 16 bpp .borowed from glide/sst1/include/sst1init.h */
- 800, 600, 800, 600, 0, 0, 16, 0,
- {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
- 0, 0, -1, -1, 0,
- 25000, 86, 41, 23, 1, 127, 4,
- 0, FB_VMODE_NONINTERLACED };
-#elif ( DEFAULT_MODE == 1 )
- {/* 640x480@75, 16 bpp .borowed from glide/sst1/include/sst1init.h */
- 640, 480, 640, 480, 0, 0, 16, 0,
- {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
- 0, 0, -1, -1, 0,
- 31746, 118, 17, 16, 1, 63, 3,
- 0, FB_VMODE_NONINTERLACED };
-#elif ( DEFAULT_MODE == 2 )
- { /* 1024x768@76 took from my /etc/fb.modes */
- 1024, 768, 1024, 768,0, 0, 16,0,
- {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
- 0, 0, -1, -1, 0,
- 11764, 208, 8, 36, 16, 120, 3 ,
- 0, FB_VMODE_NONINTERLACED };
-#elif ( DEFAULT_MODE == 3 )
- { /* 640x480@60 , 16bpp glide default ?*/
- 640, 480, 640, 480, 0, 0, 16, 0,
- {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
- 0, 0, -1, -1, 0,
- 39721 , 38, 26 , 25 ,18 , 96 ,2,
- 0, FB_VMODE_NONINTERLACED };
-#elif
- #error "Invalid DEFAULT_MODE value !"
-#endif
-
/*
* debug functions
*/
-static void sstfb_drawdebugimage(struct fb_info *info);
-static int sstfb_dump_regs(struct fb_info *info);
-
-
#if (SST_DEBUG_REG > 0)
static void sst_dbg_print_read_reg(u32 reg, u32 val) {
const char *regname;
return 0;
}
-static int sstfb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
+static void sstfb_setvgapass( struct fb_info *info, int enable )
{
struct sstfb_par *par = info->par;
struct pci_dev *sst_dev = par->dev;
- u32 fbiinit0, tmp, val;
- u_long p;
+ u32 fbiinit0, tmp;
+
+ enable = enable ? 1:0;
+ if (par->vgapass == enable)
+ return;
+ par->vgapass = enable;
+
+ pci_read_config_dword(sst_dev, PCI_INIT_ENABLE, &tmp);
+ pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
+ tmp | PCI_EN_INIT_WR );
+ fbiinit0 = sst_read (FBIINIT0);
+ if (par->vgapass) {
+ sst_write(FBIINIT0, fbiinit0 & ~DIS_VGA_PASSTHROUGH);
+ printk(KERN_INFO "fb%d: Enabling VGA pass-through\n", info->node );
+ } else {
+ sst_write(FBIINIT0, fbiinit0 | DIS_VGA_PASSTHROUGH);
+ printk(KERN_INFO "fb%d: Disabling VGA pass-through\n", info->node );
+ }
+ pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp);
+}
+
+static ssize_t store_vgapass(struct device *device, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fb_info *info = dev_get_drvdata(device);
+ char ** last = NULL;
+ int val;
+
+ val = simple_strtoul(buf, last, 0);
+ sstfb_setvgapass(info, val);
+
+ return count;
+}
+
+static ssize_t show_vgapass(struct device *device, struct device_attribute *attr,
+ char *buf)
+{
+ struct fb_info *info = dev_get_drvdata(device);
+ struct sstfb_par *par = info->par;
+ return snprintf(buf, PAGE_SIZE, "%d\n", par->vgapass);
+}
+
+static struct device_attribute device_attrs[] = {
+ __ATTR(vgapass, S_IRUGO|S_IWUSR, show_vgapass, store_vgapass)
+ };
+
+static int sstfb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+{
+ struct sstfb_par *par;
+ u32 val;
switch (cmd) {
-
- /* dump current FBIINIT values to system log */
- case _IO('F', 0xdb): /* 0x46db */
- return sstfb_dump_regs(info);
-
- /* fills lfb with #arg pixels */
- case _IOW('F', 0xdc, u32): /* 0x46dc */
+ /* set/get VGA pass_through mode */
+ case SSTFB_SET_VGAPASS:
if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
return -EFAULT;
- if (val > info->fix.smem_len)
- val = info->fix.smem_len;
- for (p = 0 ; p < val; p += 2)
- writew(p >> 6, info->screen_base + p);
+ sstfb_setvgapass(info, val);
return 0;
-
- /* change VGA pass_through mode */
- case _IOW('F', 0xdd, u32): /* 0x46dd */
- if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
+ case SSTFB_GET_VGAPASS:
+ par = info->par;
+ val = par->vgapass;
+ if (copy_to_user((void __user *)arg, &val, sizeof(val)))
return -EFAULT;
- pci_read_config_dword(sst_dev, PCI_INIT_ENABLE, &tmp);
- pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
- tmp | PCI_EN_INIT_WR );
- fbiinit0 = sst_read (FBIINIT0);
- if (val)
- sst_write(FBIINIT0, fbiinit0 & ~EN_VGA_PASSTHROUGH);
- else
- sst_write(FBIINIT0, fbiinit0 | EN_VGA_PASSTHROUGH);
- pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp);
- return 0;
-
- /* draw test image */
- case _IO('F', 0xde): /* 0x46de */
- f_dprintk("test color display at %d bpp\n",
- info->var.bits_per_pixel);
- sstfb_drawdebugimage(info);
return 0;
}
+
return -EINVAL;
}
/*
* FillRect 2D command (solidfill or invert (via ROP_XOR)) - Voodoo2 only
*/
+#if 0
static void sstfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
struct sstfb_par *par = info->par;
| (BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) | BIT(16) );
sst_wait_idle();
}
+#endif
struct pll_timing gfx_timings;
struct sst_spec *spec;
int Fout;
+ int gfx_clock;
spec = &voodoo_spec[par->type];
f_ddprintk(" fbiinit0 fbiinit1 fbiinit2 fbiinit3 fbiinit4 "
}
/* set graphic clock */
- par->gfx_clock = spec->default_gfx_clock;
+ gfx_clock = spec->default_gfx_clock;
if ((gfxclk >10 ) && (gfxclk < spec->max_gfxclk)) {
printk(KERN_INFO "sstfb: Using supplied graphic freq : %dMHz\n", gfxclk);
- par->gfx_clock = gfxclk *1000;
+ gfx_clock = gfxclk *1000;
} else if (gfxclk) {
printk(KERN_WARNING "sstfb: %dMhz is way out of spec! Using default\n", gfxclk);
}
- sst_calc_pll(par->gfx_clock, &Fout, &gfx_timings);
+ sst_calc_pll(gfx_clock, &Fout, &gfx_timings);
par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK);
/* disable fbiinit remap */
fbiinit0 = FBIINIT0_DEFAULT;
fbiinit1 = FBIINIT1_DEFAULT;
fbiinit4 = FBIINIT4_DEFAULT;
- if (vgapass)
- fbiinit0 &= ~EN_VGA_PASSTHROUGH;
+ par->vgapass = vgapass;
+ if (par->vgapass)
+ fbiinit0 &= ~DIS_VGA_PASSTHROUGH;
else
- fbiinit0 |= EN_VGA_PASSTHROUGH;
+ fbiinit0 |= DIS_VGA_PASSTHROUGH;
if (slowpci) {
fbiinit1 |= SLOW_PCI_WRITES;
fbiinit4 |= SLOW_PCI_READS;
/* TODO maybe shutdown the dac, vrefresh and so on... */
pci_write_config_dword(dev, PCI_INIT_ENABLE,
PCI_EN_INIT_WR);
- sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET | EN_VGA_PASSTHROUGH);
+ sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET | DIS_VGA_PASSTHROUGH);
pci_write_config_dword(dev, PCI_VCLK_DISABLE,0);
/* maybe keep fbiinit* and PCI_INIT_enable in the fb_info struct
* from start ? */
/*
* Interface to the world
*/
-#ifndef MODULE
-static int __init sstfb_setup(char *options)
+static int __devinit sstfb_setup(char *options)
{
char *this_opt;
}
return 0;
}
-#endif
+
static struct fb_ops sstfb_ops = {
.owner = THIS_MODULE,
*/
fix->line_length = 2048; /* default value, for 24 or 32bit: 4096 */
- if ( mode_option &&
- fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16)) {
- printk(KERN_ERR "sstfb: can't set supplied video mode. Using default\n");
- info->var = sstfb_default;
- } else
- info->var = sstfb_default;
+ fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16);
if (sstfb_check_var(&info->var, info)) {
- printk(KERN_ERR "sstfb: invalid default video mode.\n");
+ printk(KERN_ERR "sstfb: invalid video mode.\n");
goto fail;
}
goto fail;
}
- if (1) /* set to 0 to see an initial bitmap instead */
- sstfb_clear_screen(info);
- else
- sstfb_drawdebugimage(info);
+ sstfb_clear_screen(info);
+
+ if (device_create_file(info->dev, &device_attrs[0]))
+ printk(KERN_WARNING "sstfb: can't create sysfs entry.\n");
+
printk(KERN_INFO "fb%d: %s frame buffer device at 0x%p\n",
info->node, fix->id, info->screen_base);
return 0;
fail:
+ fb_dealloc_cmap(&info->cmap);
iounmap(info->screen_base);
fail_fb_remap:
iounmap(par->mmio_vbase);
info = pci_get_drvdata(pdev);
par = info->par;
+ device_remove_file(info->dev, &device_attrs[0]);
sst_shutdown(info);
- unregister_framebuffer(info);
iounmap(info->screen_base);
iounmap(par->mmio_vbase);
release_mem_region(info->fix.smem_start, 0x400000);
release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+ fb_dealloc_cmap(&info->cmap);
+ unregister_framebuffer(info);
framebuffer_release(info);
}
-static struct pci_device_id sstfb_id_tbl[] = {
- { PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_VOODOO1 },
- { PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_VOODOO2 },
+static const struct pci_device_id sstfb_id_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO ),
+ .driver_data = ID_VOODOO1, },
+ { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO2),
+ .driver_data = ID_VOODOO2, },
{ 0 },
};
static int __devinit sstfb_init(void)
{
-#ifndef MODULE
char *option = NULL;
if (fb_get_options("sstfb", &option))
return -ENODEV;
sstfb_setup(option);
-#endif
+
return pci_register_driver(&sstfb_driver);
}
-#ifdef MODULE
static void __devexit sstfb_exit(void)
{
pci_unregister_driver(&sstfb_driver);
}
-#endif
-/*
- * testing and debugging functions
- */
-
-static int sstfb_dump_regs(struct fb_info *info)
-{
-#ifdef SST_DEBUG
- static struct { u32 reg ; const char *reg_name;} pci_regs[] = {
- { PCI_INIT_ENABLE, "initenable"},
- { PCI_VCLK_ENABLE, "enable vclk"},
- { PCI_VCLK_DISABLE, "disable vclk"},
- };
-
- static struct { u32 reg ; const char *reg_name;} sst_regs[] = {
- {FBIINIT0,"fbiinit0"},
- {FBIINIT1,"fbiinit1"},
- {FBIINIT2,"fbiinit2"},
- {FBIINIT3,"fbiinit3"},
- {FBIINIT4,"fbiinit4"},
- {FBIINIT5,"fbiinit5"},
- {FBIINIT6,"fbiinit6"},
- {FBIINIT7,"fbiinit7"},
- {LFBMODE,"lfbmode"},
- {FBZMODE,"fbzmode"},
- };
-
- const int pci_s = ARRAY_SIZE(pci_regs);
- const int sst_s = ARRAY_SIZE(sst_regs);
- struct sstfb_par *par = info->par;
- struct pci_dev *dev = par->dev;
- u32 pci_res[pci_s];
- u32 sst_res[sst_s];
- int i;
-
- for (i=0; i<pci_s; i++) {
- pci_read_config_dword(dev, pci_regs[i].reg, &pci_res[i]);
- }
- for (i=0; i<sst_s; i++) {
- sst_res[i] = sst_read(sst_regs[i].reg);
- }
-
- dprintk("hardware register dump:\n");
- for (i=0; i<pci_s; i++) {
- dprintk("%s %0#10x\n", pci_regs[i].reg_name, pci_res[i]);
- }
- for (i=0; i<sst_s; i++) {
- dprintk("%s %0#10x\n", sst_regs[i].reg_name, sst_res[i]);
- }
- return 0;
-#else
- return -EINVAL;
-#endif
-}
-
-static void sstfb_fillrect_softw( struct fb_info *info, const struct fb_fillrect *rect)
-{
- u8 __iomem *fbbase_virt = info->screen_base;
- int x, y, w = info->var.bits_per_pixel == 16 ? 2 : 4;
- u32 color = rect->color, height = rect->height;
- u8 __iomem *p;
-
- if (w==2) color |= color<<16;
- for (y=rect->dy; height; y++, height--) {
- p = fbbase_virt + y*info->fix.line_length + rect->dx*w;
- x = rect->width;
- if (w==2) x>>=1;
- while (x) {
- writel(color, p);
- p += 4;
- x--;
- }
- }
-}
-
-static void sstfb_drawrect_XY( struct fb_info *info, int x, int y,
- int w, int h, int color, int hwfunc)
-{
- struct fb_fillrect rect;
- rect.dx = x;
- rect.dy = y;
- rect.height = h;
- rect.width = w;
- rect.color = color;
- rect.rop = ROP_COPY;
- if (hwfunc)
- sstfb_fillrect(info, &rect);
- else
- sstfb_fillrect_softw(info, &rect);
-}
-
-/* print some squares on the fb */
-static void sstfb_drawdebugimage(struct fb_info *info)
-{
- static int idx;
-
- /* clear screen */
- sstfb_clear_screen(info);
-
- idx = (idx+1) & 1;
-
- /* white rect */
- sstfb_drawrect_XY(info, 0, 0, 50, 50, 0xffff, idx);
-
- /* blue rect */
- sstfb_drawrect_XY(info, 50, 50, 50, 50, 0x001f, idx);
-
- /* green rect */
- sstfb_drawrect_XY(info, 100, 100, 80, 80, 0x07e0, idx);
-
- /* red rect */
- sstfb_drawrect_XY(info, 250, 250, 120, 100, 0xf800, idx);
-}
-
module_init(sstfb_init);
-
-#ifdef MODULE
module_exit(sstfb_exit);
-#endif
MODULE_AUTHOR("(c) 2000,2002 Ghozlane Toumi <gtoumi@laposte.net>");
MODULE_DESCRIPTION("FBDev driver for 3dfx Voodoo Graphics and Voodoo2 based video boards");
MODULE_PARM_DESC(gfxclk, "Force graphic chip frequency in MHz. DANGEROUS. (default=auto)");
module_param(slowpci, bool, 0);
MODULE_PARM_DESC(slowpci, "Uses slow PCI settings (0 or 1) (default=0)");
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "Initial video mode (default=" DEFAULT_VIDEO_MODE ")");
+
projects / linux-2.6 / commitdiff