]> err.no Git - linux-2.6/commitdiff
Blackfin Serial Driver: Fix bug - Increase buffer tail immediately before starting...
authorSonic Zhang <sonic.zhang@analog.com>
Mon, 25 Feb 2008 07:16:50 +0000 (15:16 +0800)
committerBryan Wu <cooloney@kernel.org>
Mon, 25 Feb 2008 07:16:50 +0000 (15:16 +0800)
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=2920

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
drivers/serial/bfin_5xx.c

index 69ac7007682e09a5abd797899b7200d7cd6c58a4..2fb3081c5022736c581faed033ce3aed80038dbd 100644 (file)
@@ -64,15 +64,20 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart);
 static void bfin_serial_stop_tx(struct uart_port *port)
 {
        struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+       struct circ_buf *xmit = &uart->port.info->xmit;
 #if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA)
        unsigned short ier;
 #endif
 
        while (!(UART_GET_LSR(uart) & TEMT))
-               continue;
+               cpu_relax();
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
        disable_dma(uart->tx_dma_channel);
+       xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
+       uart->port.icount.tx += uart->tx_count;
+       uart->tx_count = 0;
+       uart->tx_done = 1;
 #else
 #ifdef CONFIG_BF54x
        /* Clear TFI bit */
@@ -94,7 +99,8 @@ static void bfin_serial_start_tx(struct uart_port *port)
        struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
-       bfin_serial_dma_tx_chars(uart);
+       if (uart->tx_done)
+               bfin_serial_dma_tx_chars(uart);
 #else
 #ifdef CONFIG_BF54x
        UART_SET_IER(uart, ETBEI);
@@ -389,12 +395,10 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
        unsigned short ier;
        int flags = 0;
 
-       if (!uart->tx_done)
-               return;
        uart->tx_done = 0;
 
        if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
-               bfin_serial_stop_tx(&uart->port);
+               uart->tx_count = 0;
                uart->tx_done = 1;
                return;
        }
@@ -428,9 +432,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
        set_dma_x_modify(uart->tx_dma_channel, 1);
        enable_dma(uart->tx_dma_channel);
 
-       xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
-       uart->port.icount.tx += uart->tx_count;
-
 #ifdef CONFIG_BF54x
        UART_SET_IER(uart, ETBEI);
 #else
@@ -515,8 +516,8 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 
        spin_lock(&uart->port.lock);
        if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
-               clear_dma_irqstat(uart->tx_dma_channel);
                disable_dma(uart->tx_dma_channel);
+               clear_dma_irqstat(uart->tx_dma_channel);
 #ifdef CONFIG_BF54x
                UART_CLEAR_IER(uart, ETBEI);
 #else
@@ -527,7 +528,8 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
                if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
                        uart_write_wakeup(&uart->port);
 
-               uart->tx_done = 1;
+               xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
+               uart->port.icount.tx += uart->tx_count;
 
                bfin_serial_dma_tx_chars(uart);
        }
@@ -542,12 +544,14 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
        unsigned short irqstat;
 
        uart->rx_dma_nrows++;
-       if (uart->rx_dma_nrows == DMA_RX_YCOUNT) {
+       uart->rx_dma_buf.tail = DMA_RX_XCOUNT * uart->rx_dma_nrows;
+       bfin_serial_dma_rx_chars(uart);
+       if (uart->rx_dma_nrows >= DMA_RX_YCOUNT) {
                uart->rx_dma_nrows = 0;
-               uart->rx_dma_buf.tail = DMA_RX_XCOUNT*DMA_RX_YCOUNT;
-               bfin_serial_dma_rx_chars(uart);
-               uart->rx_dma_buf.head = uart->rx_dma_buf.tail = 0;
+               uart->rx_dma_buf.tail = 0;
        }
+       uart->rx_dma_buf.head = uart->rx_dma_buf.tail;
+
        spin_lock(&uart->port.lock);
        irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
        clear_dma_irqstat(uart->rx_dma_channel);