[ARM] 3589/1: AT91RM9200 DK/EK board update

Patch from Andrew Victor

This patch updates the support for the Atmel DK and EK boards.

The changes include:
1. Use the new at91_uart_config structure and device registration
functions for the UARTs.
2. Registration of I2C and SPI platform devices.
3. The USB Device pullup line is connected to reset, so multidrive needs
to be enabled on the line.  [Patch from David Brownell].

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c
index 2d7200ed66ed72855c25537f65ac89a7022a5fe4..eb02ca95be7900122e145b98142ae43c278a5247 100644 (file)
--- a/arch/arm/mach-at91rm9200/board-dk.c
+++ b/arch/arm/mach-at91rm9200/board-dk.c
@@ -27,6 +27,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -38,8 +39,8 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/hardware.h>
-#include <asm/mach/serial_at91rm9200.h>
 #include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
 
 #include "generic.h"
 
@@ -57,14 +58,14 @@ static void __init dk_init_irq(void)
  *    0 .. 3 = USART0 .. USART3
  *    4      = DBGU
  */
-#define DK_UART_MAP            { 4, 1, -1, -1, -1 }    /* ttyS0, ..., ttyS4 */
-#define DK_SERIAL_CONSOLE      0                       /* ttyS0 */
+static struct at91_uart_config __initdata dk_uart_config = {
+       .console_tty    = 0,                            /* ttyS0 */
+       .nr_tty         = 2,
+       .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
+};
 
 static void __init dk_map_io(void)
 {
-       int serial[AT91_NR_UART] = DK_UART_MAP;
-       int i;
-
        at91rm9200_map_io();
 
        /* Initialize clocks: 18.432 MHz crystal */
@@ -73,16 +74,8 @@ static void __init dk_map_io(void)
        /* Setup the LEDs */
        at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
 
-#ifdef CONFIG_SERIAL_AT91
-       at91_console_port = DK_SERIAL_CONSOLE;
-       memcpy(at91_serial_map, serial, sizeof(serial));
-
-       /* Register UARTs */
-       for (i = 0; i < AT91_NR_UART; i++) {
-               if (at91_serial_map[i] >= 0)
-                       at91_register_uart(i, at91_serial_map[i]);
-       }
-#endif
+       /* Setup the serial ports and console */
+       at91_init_serial(&dk_uart_config);
 }
 
 static struct at91_eth_data __initdata dk_eth_data = {
@@ -111,16 +104,48 @@ static struct at91_mmc_data __initdata dk_mmc_data = {
        .wire4          = 1,
 };
 
+static struct spi_board_info dk_spi_devices[] = {
+       {       /* DataFlash chip */
+               .modalias       = "mtd_dataflash",
+               .chip_select    = 0,
+               .max_speed_hz   = 15 * 1000 * 1000,
+       },
+       {       /* UR6HCPS2-SP40 PS2-to-SPI adapter */
+               .modalias       = "ur6hcps2",
+               .chip_select    = 1,
+               .max_speed_hz   = 250 *  1000,
+       },
+       {       /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
+               .modalias       = "tlv1504",
+               .chip_select    = 2,
+               .max_speed_hz   = 20 * 1000 * 1000,
+       },
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+       {       /* DataFlash card */
+               .modalias       = "mtd_dataflash",
+               .chip_select    = 3,
+               .max_speed_hz   = 15 * 1000 * 1000,
+       }
+#endif
+};
+
 static void __init dk_board_init(void)
 {
+       /* Serial */
+       at91_add_device_serial();
        /* Ethernet */
        at91_add_device_eth(&dk_eth_data);
        /* USB Host */
        at91_add_device_usbh(&dk_usbh_data);
        /* USB Device */
        at91_add_device_udc(&dk_udc_data);
+       at91_set_multi_drive(dk_udc_data.pullup_pin, 1);        /* pullup_pin is connected to reset */
        /* Compact Flash */
        at91_add_device_cf(&dk_cf_data);
+       /* I2C */
+       at91_add_device_i2c();
+       /* SPI */
+       at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
 #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
        /* DataFlash card */
        at91_set_gpio_output(AT91_PIN_PB7, 0);

diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c
index 80d90f5135a13cd0db47e4eaea6735fe14c8b15a..4d7468e4267953478604f19ec6e2b8639ea15594 100644 (file)
--- a/arch/arm/mach-at91rm9200/board-ek.c
+++ b/arch/arm/mach-at91rm9200/board-ek.c
@@ -27,6 +27,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -38,8 +39,8 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/hardware.h>
-#include <asm/mach/serial_at91rm9200.h>
 #include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
 
 #include "generic.h"
 
@@ -57,14 +58,14 @@ static void __init ek_init_irq(void)
  *    0 .. 3 = USART0 .. USART3
  *    4      = DBGU
  */
-#define EK_UART_MAP            { 4, 1, -1, -1, -1 }    /* ttyS0, ..., ttyS4 */
-#define EK_SERIAL_CONSOLE      0                       /* ttyS0 */
+static struct at91_uart_config __initdata ek_uart_config = {
+       .console_tty    = 0,                            /* ttyS0 */
+       .nr_tty         = 2,
+       .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
+};
 
 static void __init ek_map_io(void)
 {
-       int serial[AT91_NR_UART] = EK_UART_MAP;
-       int i;
-
        at91rm9200_map_io();
 
        /* Initialize clocks: 18.432 MHz crystal */
@@ -73,16 +74,8 @@ static void __init ek_map_io(void)
        /* Setup the LEDs */
        at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
 
-#ifdef CONFIG_SERIAL_AT91
-       at91_console_port = EK_SERIAL_CONSOLE;
-       memcpy(at91_serial_map, serial, sizeof(serial));
-
-       /* Register UARTs */
-       for (i = 0; i < AT91_NR_UART; i++) {
-               if (serial[i] >= 0)
-                       at91_register_uart(i, serial[i]);
-       }
-#endif
+       /* Setup the serial ports and console */
+       at91_init_serial(&ek_uart_config);
 }
 
 static struct at91_eth_data __initdata ek_eth_data = {
@@ -106,14 +99,36 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
        .wp_pin         = AT91_PIN_PA17,
 };
 
+static struct spi_board_info ek_spi_devices[] = {
+       {       /* DataFlash chip */
+               .modalias       = "mtd_dataflash",
+               .chip_select    = 0,
+               .max_speed_hz   = 15 * 1000 * 1000,
+       },
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+       {       /* DataFlash card */
+               .modalias       = "mtd_dataflash",
+               .chip_select    = 3,
+               .max_speed_hz   = 15 * 1000 * 1000,
+       },
+#endif
+};
+
 static void __init ek_board_init(void)
 {
+       /* Serial */
+       at91_add_device_serial();
        /* Ethernet */
        at91_add_device_eth(&ek_eth_data);
        /* USB Host */
        at91_add_device_usbh(&ek_usbh_data);
        /* USB Device */
        at91_add_device_udc(&ek_udc_data);
+       at91_set_multi_drive(ek_udc_data.pullup_pin, 1);        /* pullup_pin is connected to reset */
+       /* I2C */
+       at91_add_device_i2c();
+       /* SPI */
+       at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
        /* DataFlash card */
        at91_set_gpio_output(AT91_PIN_PB22, 0);