int force_mwait __cpuinitdata;
-/*
+/*
* Early DMI memory
*/
int dmi_alloc_index;
bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT;
bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size);
if (bootmap == -1L)
- panic("Cannot find bootmem map of size %ld\n",bootmap_size);
+ panic("Cannot find bootmem map of size %ld\n", bootmap_size);
bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn);
e820_register_active_regions(0, start_pfn, end_pfn);
free_bootmem_with_active_regions(0, end_pfn);
reserve_bootmem(bootmap, bootmap_size);
-}
+}
#endif
#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
unsigned long long crash_size, crash_base;
int ret;
- free_mem = ((unsigned long long)max_low_pfn - min_low_pfn) << PAGE_SHIFT;
+ free_mem =
+ ((unsigned long long)max_low_pfn - min_low_pfn) << PAGE_SHIFT;
ret = parse_crashkernel(boot_command_line, free_mem,
&crash_size, &crash_base);
static void discover_ebda(void)
{
/*
- * there is a real-mode segmented pointer pointing to the
+ * there is a real-mode segmented pointer pointing to the
* 4K EBDA area at 0x40E
*/
ebda_addr = *(unsigned short *)__va(EBDA_ADDR_POINTER);
void __init setup_arch(char **cmdline_p)
{
+ unsigned i;
+
printk(KERN_INFO "Command line: %s\n", boot_command_line);
ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
#endif
#ifdef CONFIG_NUMA
- numa_initmem_init(0, end_pfn);
+ numa_initmem_init(0, end_pfn);
#else
contig_initmem_init(0, end_pfn);
#endif
/* Reserve direct mapping */
- reserve_bootmem_generic(table_start << PAGE_SHIFT,
+ reserve_bootmem_generic(table_start << PAGE_SHIFT,
(table_end - table_start) << PAGE_SHIFT);
/* reserve kernel */
#endif
#ifdef CONFIG_ACPI_SLEEP
- /*
- * Reserve low memory region for sleep support.
- */
- acpi_reserve_bootmem();
-#endif
/*
- * Find and reserve possible boot-time SMP configuration:
+ * Reserve low memory region for sleep support.
*/
+ acpi_reserve_bootmem();
+#endif
+ /*
+ * Find and reserve possible boot-time SMP configuration:
+ */
find_smp_config();
#ifdef CONFIG_BLK_DEV_INITRD
if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
/*
* We trust e820 completely. No explicit ROM probing in memory.
- */
+ */
e820_reserve_resources(&code_resource, &data_resource, &bss_resource);
e820_mark_nosave_regions();
- {
- unsigned i;
/* request I/O space for devices used on all i[345]86 PCs */
for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
request_resource(&ioport_resource, &standard_io_resources[i]);
- }
e820_setup_gap();
if (n >= 0x80000005) {
cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
- printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
- edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
- c->x86_cache_size=(ecx>>24)+(edx>>24);
+ printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), "
+ "D cache %dK (%d bytes/line)\n",
+ edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
+ c->x86_cache_size = (ecx>>24) + (edx>>24);
/* On K8 L1 TLB is inclusive, so don't count it */
c->x86_tlbsize = 0;
}
}
if (n >= 0x80000007)
- cpuid(0x80000007, &dummy, &dummy, &dummy, &c->x86_power);
+ cpuid(0x80000007, &dummy, &dummy, &dummy, &c->x86_power);
if (n >= 0x80000008) {
- cpuid(0x80000008, &eax, &dummy, &dummy, &dummy);
+ cpuid(0x80000008, &eax, &dummy, &dummy, &dummy);
c->x86_virt_bits = (eax >> 8) & 0xff;
c->x86_phys_bits = eax & 0xff;
}
#ifdef CONFIG_NUMA
static int nearby_node(int apicid)
{
- int i;
+ int i, node;
+
for (i = apicid - 1; i >= 0; i--) {
- int node = apicid_to_node[i];
+ node = apicid_to_node[i];
if (node != NUMA_NO_NODE && node_online(node))
return node;
}
for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
- int node = apicid_to_node[i];
+ node = apicid_to_node[i];
if (node != NUMA_NO_NODE && node_online(node))
return node;
}
c->phys_proc_id = phys_pkg_id(bits);
#ifdef CONFIG_NUMA
- node = c->phys_proc_id;
- if (apicid_to_node[apicid] != NUMA_NO_NODE)
- node = apicid_to_node[apicid];
- if (!node_online(node)) {
- /* Two possibilities here:
- - The CPU is missing memory and no node was created.
- In that case try picking one from a nearby CPU
- - The APIC IDs differ from the HyperTransport node IDs
- which the K8 northbridge parsing fills in.
- Assume they are all increased by a constant offset,
- but in the same order as the HT nodeids.
- If that doesn't result in a usable node fall back to the
- path for the previous case. */
+ node = c->phys_proc_id;
+ if (apicid_to_node[apicid] != NUMA_NO_NODE)
+ node = apicid_to_node[apicid];
+ if (!node_online(node)) {
+ /* Two possibilities here:
+ - The CPU is missing memory and no node was created.
+ In that case try picking one from a nearby CPU
+ - The APIC IDs differ from the HyperTransport node IDs
+ which the K8 northbridge parsing fills in.
+ Assume they are all increased by a constant offset,
+ but in the same order as the HT nodeids.
+ If that doesn't result in a usable node fall back to the
+ path for the previous case. */
+
int ht_nodeid = apicid - (cpu_data(0).phys_proc_id << bits);
- if (ht_nodeid >= 0 &&
- apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
- node = apicid_to_node[ht_nodeid];
- /* Pick a nearby node */
- if (!node_online(node))
- node = nearby_node(apicid);
- }
+
+ if (ht_nodeid >= 0 &&
+ apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
+ node = apicid_to_node[ht_nodeid];
+ /* Pick a nearby node */
+ if (!node_online(node))
+ node = nearby_node(apicid);
+ }
numa_set_node(cpu, node);
printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */
static __cpuinit int amd_apic_timer_broken(void)
{
- u32 lo, hi;
- u32 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+ u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+
switch (eax & CPUID_XFAM) {
case CPUID_XFAM_K8:
if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F)
/*
* Disable TLB flush filter by setting HWCR.FFDIS on K8
* bit 6 of msr C001_0015
- *
+ *
* Errata 63 for SH-B3 steppings
* Errata 122 for all steppings (F+ have it disabled by default)
*/
/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
clear_bit(0*32+31, &c->x86_capability);
-
+
/* On C+ stepping K8 rep microcode works well for copy/memset */
level = cpuid_eax(1);
- if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58))
+ if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) ||
+ level >= 0x0f58))
set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability);
if (c->x86 == 0x10 || c->x86 == 0x11)
set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability);
level = get_model_name(c);
if (!level) {
- switch (c->x86) {
+ switch (c->x86) {
case 15:
/* Should distinguish Models here, but this is only
a fallback anyways. */
strcpy(c->x86_model_id, "Hammer");
- break;
- }
- }
+ break;
+ }
+ }
display_cacheinfo(c);
/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
static void __cpuinit detect_ht(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
- u32 eax, ebx, ecx, edx;
- int index_msb, core_bits;
+ u32 eax, ebx, ecx, edx;
+ int index_msb, core_bits;
cpuid(1, &eax, &ebx, &ecx, &edx);
if (!cpu_has(c, X86_FEATURE_HT))
return;
- if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
+ if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
goto out;
smp_num_siblings = (ebx & 0xff0000) >> 16;
if (smp_num_siblings == 1) {
printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
- } else if (smp_num_siblings > 1 ) {
+ } else if (smp_num_siblings > 1) {
if (smp_num_siblings > NR_CPUS) {
- printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings);
+ printk(KERN_WARNING "CPU: Unsupported number of "
+ "siblings %d", smp_num_siblings);
smp_num_siblings = 1;
return;
}
smp_num_siblings = smp_num_siblings / c->x86_max_cores;
- index_msb = get_count_order(smp_num_siblings) ;
+ index_msb = get_count_order(smp_num_siblings);
core_bits = get_count_order(c->x86_max_cores);
}
out:
if ((c->x86_max_cores * smp_num_siblings) > 1) {
- printk(KERN_INFO "CPU: Physical Processor ID: %d\n", c->phys_proc_id);
- printk(KERN_INFO "CPU: Processor Core ID: %d\n", c->cpu_core_id);
+ printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
+ c->phys_proc_id);
+ printk(KERN_INFO "CPU: Processor Core ID: %d\n",
+ c->cpu_core_id);
}
#endif
unsigned n;
init_intel_cacheinfo(c);
- if (c->cpuid_level > 9 ) {
+ if (c->cpuid_level > 9) {
unsigned eax = cpuid_eax(10);
/* Check for version and the number of counters */
if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
set_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability);
else
clear_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability);
- c->x86_max_cores = intel_num_cpu_cores(c);
+ c->x86_max_cores = intel_num_cpu_cores(c);
srat_detect_node();
}
(unsigned int *)&c->x86_vendor_id[0],
(unsigned int *)&c->x86_vendor_id[8],
(unsigned int *)&c->x86_vendor_id[4]);
-
+
get_cpu_vendor(c);
/* Initialize the standard set of capabilities */
c->x86 += (tfms >> 20) & 0xff;
if (c->x86 >= 0x6)
c->x86_model += ((tfms >> 16) & 0xF) << 4;
- if (c->x86_capability[0] & (1<<19))
+ if (c->x86_capability[0] & (1<<19))
c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
} else {
/* Have CPUID level 0 only - unheard of */
}
select_idle_routine(c);
- detect_ht(c);
+ detect_ht(c);
/*
* On SMP, boot_cpu_data holds the common feature set between
*/
if (c != &boot_cpu_data) {
/* AND the already accumulated flags with these */
- for (i = 0 ; i < NCAPINTS ; i++)
+ for (i = 0; i < NCAPINTS; i++)
boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
}
numa_add_cpu(smp_processor_id());
#endif
}
-
void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
{
if (c->x86_model_id[0])
- printk("%s", c->x86_model_id);
+ printk(KERN_INFO "%s", c->x86_model_id);
- if (c->x86_mask || c->cpuid_level >= 0)
- printk(" stepping %02x\n", c->x86_mask);
+ if (c->x86_mask || c->cpuid_level >= 0)
+ printk(KERN_CONT " stepping %02x\n", c->x86_mask);
else
- printk("\n");
+ printk(KERN_CONT "\n");
}
/*
static int show_cpuinfo(struct seq_file *m, void *v)
{
struct cpuinfo_x86 *c = v;
- int cpu = 0;
+ int cpu = 0, i;
- /*
+ /*
* These flag bits must match the definitions in <asm/cpufeature.h>.
* NULL means this bit is undefined or reserved; either way it doesn't
* have meaning as far as Linux is concerned. Note that it's important
*/
static const char *const x86_cap_flags[] = {
/* Intel-defined */
- "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
- "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
- "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
- "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
+ "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
+ "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
+ "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
+ "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
/* AMD-defined */
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
cpu = c->cpu_index;
#endif
- seq_printf(m,"processor\t: %u\n"
- "vendor_id\t: %s\n"
- "cpu family\t: %d\n"
- "model\t\t: %d\n"
- "model name\t: %s\n",
- (unsigned)cpu,
- c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
- c->x86,
- (int)c->x86_model,
- c->x86_model_id[0] ? c->x86_model_id : "unknown");
-
+ seq_printf(m, "processor\t: %u\n"
+ "vendor_id\t: %s\n"
+ "cpu family\t: %d\n"
+ "model\t\t: %d\n"
+ "model name\t: %s\n",
+ (unsigned)cpu,
+ c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
+ c->x86,
+ (int)c->x86_model,
+ c->x86_model_id[0] ? c->x86_model_id : "unknown");
+
if (c->x86_mask || c->cpuid_level >= 0)
seq_printf(m, "stepping\t: %d\n", c->x86_mask);
else
seq_printf(m, "stepping\t: unknown\n");
-
- if (cpu_has(c,X86_FEATURE_TSC)) {
+
+ if (cpu_has(c, X86_FEATURE_TSC)) {
unsigned int freq = cpufreq_quick_get((unsigned)cpu);
+
if (!freq)
freq = cpu_khz;
seq_printf(m, "cpu MHz\t\t: %u.%03u\n",
- freq / 1000, (freq % 1000));
+ freq / 1000, (freq % 1000));
}
/* Cache size */
- if (c->x86_cache_size >= 0)
+ if (c->x86_cache_size >= 0)
seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
-
+
#ifdef CONFIG_SMP
if (smp_num_siblings * c->x86_max_cores > 1) {
seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
}
-#endif
+#endif
seq_printf(m,
- "fpu\t\t: yes\n"
- "fpu_exception\t: yes\n"
- "cpuid level\t: %d\n"
- "wp\t\t: yes\n"
- "flags\t\t:",
+ "fpu\t\t: yes\n"
+ "fpu_exception\t: yes\n"
+ "cpuid level\t: %d\n"
+ "wp\t\t: yes\n"
+ "flags\t\t:",
c->cpuid_level);
- {
- int i;
- for ( i = 0 ; i < 32*NCAPINTS ; i++ )
- if (cpu_has(c, i) && x86_cap_flags[i] != NULL)
- seq_printf(m, " %s", x86_cap_flags[i]);
- }
-
+ for (i = 0; i < 32*NCAPINTS; i++)
+ if (cpu_has(c, i) && x86_cap_flags[i] != NULL)
+ seq_printf(m, " %s", x86_cap_flags[i]);
+
seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
c->loops_per_jiffy/(500000/HZ),
(c->loops_per_jiffy/(5000/HZ)) % 100);
- if (c->x86_tlbsize > 0)
+ if (c->x86_tlbsize > 0)
seq_printf(m, "TLB size\t: %d 4K pages\n", c->x86_tlbsize);
seq_printf(m, "clflush size\t: %d\n", c->x86_clflush_size);
seq_printf(m, "cache_alignment\t: %d\n", c->x86_cache_alignment);
- seq_printf(m, "address sizes\t: %u bits physical, %u bits virtual\n",
+ seq_printf(m, "address sizes\t: %u bits physical, %u bits virtual\n",
c->x86_phys_bits, c->x86_virt_bits);
seq_printf(m, "power management:");
- {
- unsigned i;
- for (i = 0; i < 32; i++)
- if (c->x86_power & (1 << i)) {
- if (i < ARRAY_SIZE(x86_power_flags) &&
- x86_power_flags[i])
- seq_printf(m, "%s%s",
- x86_power_flags[i][0]?" ":"",
- x86_power_flags[i]);
- else
- seq_printf(m, " [%d]", i);
- }
+ for (i = 0; i < 32; i++) {
+ if (c->x86_power & (1 << i)) {
+ if (i < ARRAY_SIZE(x86_power_flags) &&
+ x86_power_flags[i])
+ seq_printf(m, "%s%s",
+ x86_power_flags[i][0]?" ":"",
+ x86_power_flags[i]);
+ else
+ seq_printf(m, " [%d]", i);
+ }
}
seq_printf(m, "\n\n");
}
struct seq_operations cpuinfo_op = {
- .start =c_start,
+ .start = c_start,
.next = c_next,
.stop = c_stop,
.show = show_cpuinfo,
projects / linux-2.6 / commitdiff