help
This enables support for systems based on the Hynix HMS720x
+config ARCH_AAEC2000
+ bool "Agilent AAEC-2000 based"
+ help
+ This enables support for systems based on the Agilent AAEC-2000
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
+source "arch/arm/mach-aaec2000/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_IMX) := imx
machine-$(CONFIG_ARCH_H720X) := h720x
+ machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
--- /dev/null
+if ARCH_AAEC2000
+
+menu "Agilent AAEC-2000 Implementations"
+
+config MACH_AAED2000
+ bool "Agilent AAED-2000 Development Platform"
+ select CPU_ARM920T
+
+endmenu
+
+endif
--- /dev/null
+#
+# Makefile for the linux kernel.
+#
+
+# Common support (must be linked before board specific support)
+obj-y += core.o
+
+# Specific board support
+obj-$(CONFIG_MACH_AAED2000) += aaed2000.o
--- /dev/null
+/*
+ * linux/arch/arm/mach-aaec2000/aaed2000.c
+ *
+ * Support for the Agilent AAED-2000 Development Platform.
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/major.h>
+#include <linux/interrupt.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "core.h"
+
+static void __init aaed2000_init_irq(void)
+{
+ aaec2000_init_irq();
+}
+
+static void __init aaed2000_map_io(void)
+{
+ aaec2000_map_io();
+}
+
+MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
+ MAINTAINER("Nicolas Bellido Y Ortega")
+ BOOT_MEM(0xf0000000, PIO_BASE, VIO_BASE)
+ MAPIO(aaed2000_map_io)
+ INITIRQ(aaed2000_init_irq)
+ .timer = &aaec2000_timer,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-aaec2000/core.c
+ *
+ * Code common to all AAEC-2000 machines
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/signal.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+/*
+ * Common I/O mapping:
+ *
+ * Static virtual address mappings are as follow:
+ *
+ * 0xf8000000-0xf8001ffff: Devices connected to APB bus
+ * 0xf8002000-0xf8003ffff: Devices connected to AHB bus
+ *
+ * Below 0xe8000000 is reserved for vm allocation.
+ *
+ * The machine specific code must provide the extra mapping beside the
+ * default mapping provided here.
+ */
+static struct map_desc standard_io_desc[] __initdata = {
+ /* virtual physical length type */
+ { VIO_APB_BASE, PIO_APB_BASE, IO_APB_LENGTH, MT_DEVICE },
+ { VIO_AHB_BASE, PIO_AHB_BASE, IO_AHB_LENGTH, MT_DEVICE }
+};
+
+void __init aaec2000_map_io(void)
+{
+ iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+}
+
+/*
+ * Interrupt handling routines
+ */
+static void aaec2000_int_ack(unsigned int irq)
+{
+ IRQ_INTSR = 1 << irq;
+}
+
+static void aaec2000_int_mask(unsigned int irq)
+{
+ IRQ_INTENC |= (1 << irq);
+}
+
+static void aaec2000_int_unmask(unsigned int irq)
+{
+ IRQ_INTENS |= (1 << irq);
+}
+
+static struct irqchip aaec2000_irq_chip = {
+ .ack = aaec2000_int_ack,
+ .mask = aaec2000_int_mask,
+ .unmask = aaec2000_int_unmask,
+};
+
+void __init aaec2000_init_irq(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < NR_IRQS; i++) {
+ set_irq_handler(i, do_level_IRQ);
+ set_irq_chip(i, &aaec2000_irq_chip);
+ set_irq_flags(i, IRQF_VALID);
+ }
+
+ /* Disable all interrupts */
+ IRQ_INTENC = 0xffffffff;
+
+ /* Clear any pending interrupts */
+ IRQ_INTSR = IRQ_INTSR;
+}
+
+/*
+ * Time keeping
+ */
+/* IRQs are disabled before entering here from do_gettimeofday() */
+static unsigned long aaec2000_gettimeoffset(void)
+{
+ unsigned long ticks_to_match, elapsed, usec;
+
+ /* Get ticks before next timer match */
+ ticks_to_match = TIMER1_LOAD - TIMER1_VAL;
+
+ /* We need elapsed ticks since last match */
+ elapsed = LATCH - ticks_to_match;
+
+ /* Now, convert them to usec */
+ usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
+
+ return usec;
+}
+
+/* We enter here with IRQs enabled */
+static irqreturn_t
+aaec2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ /* TODO: Check timer accuracy */
+ write_seqlock(&xtime_lock);
+
+ timer_tick(regs);
+ TIMER1_CLEAR = 1;
+
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction aaec2000_timer_irq = {
+ .name = "AAEC-2000 Timer Tick",
+ .flags = SA_INTERRUPT,
+ .handler = aaec2000_timer_interrupt
+};
+
+static void __init aaec2000_timer_init(void)
+{
+ /* Disable timer 1 */
+ TIMER1_CTRL = 0;
+
+ /* We have somehow to generate a 100Hz clock.
+ * We then use the 508KHz timer in periodic mode.
+ */
+ TIMER1_LOAD = LATCH;
+ TIMER1_CLEAR = 1; /* Clear interrupt */
+
+ setup_irq(INT_TMR1_OFL, &aaec2000_timer_irq);
+
+ TIMER1_CTRL = TIMER_CTRL_ENABLE |
+ TIMER_CTRL_PERIODIC |
+ TIMER_CTRL_CLKSEL_508K;
+}
+
+struct sys_timer aaec2000_timer = {
+ .init = aaec2000_timer_init,
+ .offset = aaec2000_gettimeoffset,
+};
+
--- /dev/null
+/*
+ * linux/arch/arm/mach-aaec2000/core.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct sys_timer;
+
+extern struct sys_timer aaec2000_timer;
+extern void __init aaec2000_map_io(void);
+extern void __init aaec2000_init_irq(void);
# ARM920T
config CPU_ARM920T
bool "Support ARM920T processor" if !ARCH_S3C2410
- depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX
+ depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000
default y if ARCH_S3C2410
select CPU_32v4
select CPU_ABRT_EV4T
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-aaec2000/aaec2000.h
+ *
+ * AAEC-2000 registers definition
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAEC2000_H
+#define __ASM_ARCH_AAEC2000_H
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not this file
+#endif /* __ASM_ARCH_HARDWARE_H */
+
+/* Interrupt controller */
+#define IRQ_BASE __REG(0x80000500)
+#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */
+#define IRQ_INTRSR __REG(0x80000504) /* Int Raw (unmasked) Status */
+#define IRQ_INTENS __REG(0x80000508) /* Int Enable Set */
+#define IRQ_INTENC __REG(0x8000050c) /* Int Enable Clear */
+
+/* UART 1 */
+#define UART1_BASE __REG(0x80000600)
+#define UART1_DR __REG(0x80000600) /* Data/FIFO Register */
+#define UART1_LCR __REG(0x80000604) /* Link Control Register */
+#define UART1_BRCR __REG(0x80000608) /* Baud Rate Control Register */
+#define UART1_CR __REG(0x8000060c) /* Control Register */
+#define UART1_SR __REG(0x80000610) /* Status Register */
+#define UART1_INT __REG(0x80000614) /* Interrupt Status Register */
+#define UART1_INTM __REG(0x80000618) /* Interrupt Mask Register */
+#define UART1_INTRES __REG(0x8000061c) /* Int Result (masked status) Register */
+
+/* UART 2 */
+#define UART2_BASE __REG(0x80000700)
+#define UART2_DR __REG(0x80000700) /* Data/FIFO Register */
+#define UART2_LCR __REG(0x80000704) /* Link Control Register */
+#define UART2_BRCR __REG(0x80000708) /* Baud Rate Control Register */
+#define UART2_CR __REG(0x8000070c) /* Control Register */
+#define UART2_SR __REG(0x80000710) /* Status Register */
+#define UART2_INT __REG(0x80000714) /* Interrupt Status Register */
+#define UART2_INTM __REG(0x80000718) /* Interrupt Mask Register */
+#define UART2_INTRES __REG(0x8000071c) /* Int Result (masked status) Register */
+
+/* UART 3 */
+#define UART3_BASE __REG(0x80000800)
+#define UART3_DR __REG(0x80000800) /* Data/FIFO Register */
+#define UART3_LCR __REG(0x80000804) /* Link Control Register */
+#define UART3_BRCR __REG(0x80000808) /* Baud Rate Control Register */
+#define UART3_CR __REG(0x8000080c) /* Control Register */
+#define UART3_SR __REG(0x80000810) /* Status Register */
+#define UART3_INT __REG(0x80000814) /* Interrupt Status Register */
+#define UART3_INTM __REG(0x80000818) /* Interrupt Mask Register */
+#define UART3_INTRES __REG(0x8000081c) /* Int Result (masked status) Register */
+
+/* These are used in some places */
+#define _UART1_BASE __PREG(UART1_BASE)
+#define _UART2_BASE __PREG(UART2_BASE)
+#define _UART3_BASE __PREG(UART3_BASE)
+
+/* UART Registers Offsets */
+#define UART_DR 0x00
+#define UART_LCR 0x04
+#define UART_BRCR 0x08
+#define UART_CR 0x0c
+#define UART_SR 0x10
+#define UART_INT 0x14
+#define UART_INTM 0x18
+#define UART_INTRES 0x1c
+
+/* UART_LCR Bitmask */
+#define UART_LCR_BRK (1 << 0) /* Send Break */
+#define UART_LCR_PEN (1 << 1) /* Parity Enable */
+#define UART_LCR_EP (1 << 2) /* Even/Odd Parity */
+#define UART_LCR_S2 (1 << 3) /* One/Two Stop bits */
+#define UART_LCR_FIFO (1 << 4) /* FIFO Enable */
+#define UART_LCR_WL5 (0 << 5) /* Word Length - 5 bits */
+#define UART_LCR_WL6 (1 << 5) /* Word Length - 6 bits */
+#define UART_LCR_WL7 (1 << 6) /* Word Length - 7 bits */
+#define UART_LCR_WL8 (1 << 7) /* Word Length - 8 bits */
+
+/* UART_CR Bitmask */
+#define UART_CR_EN (1 << 0) /* UART Enable */
+#define UART_CR_SIR (1 << 1) /* IrDA SIR Enable */
+#define UART_CR_SIRLP (1 << 2) /* Low Power IrDA Enable */
+#define UART_CR_RXP (1 << 3) /* Receive Pin Polarity */
+#define UART_CR_TXP (1 << 4) /* Transmit Pin Polarity */
+#define UART_CR_MXP (1 << 5) /* Modem Pin Polarity */
+#define UART_CR_LOOP (1 << 6) /* Loopback Mode */
+
+/* UART_SR Bitmask */
+#define UART_SR_CTS (1 << 0) /* Clear To Send Status */
+#define UART_SR_DSR (1 << 1) /* Data Set Ready Status */
+#define UART_SR_DCD (1 << 2) /* Data Carrier Detect Status */
+#define UART_SR_TxBSY (1 << 3) /* Transmitter Busy Status */
+#define UART_SR_RxFE (1 << 4) /* Receive FIFO Empty Status */
+#define UART_SR_TxFF (1 << 5) /* Transmit FIFO Full Status */
+#define UART_SR_RxFF (1 << 6) /* Receive FIFO Full Status */
+#define UART_SR_TxFE (1 << 7) /* Transmit FIFO Empty Status */
+
+/* UART_INT Bitmask */
+#define UART_INT_RIS (1 << 0) /* Rx Interrupt */
+#define UART_INT_TIS (1 << 1) /* Tx Interrupt */
+#define UART_INT_MIS (1 << 2) /* Modem Interrupt */
+#define UART_INT_RTIS (1 << 3) /* Receive Timeout Interrupt */
+
+/* Timer 1 */
+#define TIMER1_BASE __REG(0x80000c00)
+#define TIMER1_LOAD __REG(0x80000c00) /* Timer 1 Load Register */
+#define TIMER1_VAL __REG(0x80000c04) /* Timer 1 Value Register */
+#define TIMER1_CTRL __REG(0x80000c08) /* Timer 1 Control Register */
+#define TIMER1_CLEAR __REG(0x80000c0c) /* Timer 1 Clear Register */
+
+/* Timer 2 */
+#define TIMER2_BASE __REG(0x80000d00)
+#define TIMER2_LOAD __REG(0x80000d00) /* Timer 2 Load Register */
+#define TIMER2_VAL __REG(0x80000d04) /* Timer 2 Value Register */
+#define TIMER2_CTRL __REG(0x80000d08) /* Timer 2 Control Register */
+#define TIMER2_CLEAR __REG(0x80000d0c) /* Timer 2 Clear Register */
+
+/* Timer 3 */
+#define TIMER3_BASE __REG(0x80000e00)
+#define TIMER3_LOAD __REG(0x80000e00) /* Timer 3 Load Register */
+#define TIMER3_VAL __REG(0x80000e04) /* Timer 3 Value Register */
+#define TIMER3_CTRL __REG(0x80000e08) /* Timer 3 Control Register */
+#define TIMER3_CLEAR __REG(0x80000e0c) /* Timer 3 Clear Register */
+
+/* Timer Control register bits */
+#define TIMER_CTRL_ENABLE (1 << 7) /* Enable (Start° Timer */
+#define TIMER_CTRL_PERIODIC (1 << 6) /* Periodic Running Mode */
+#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
+#define TIMER_CTRL_CLKSEL_508K (1 << 3) /* 508KHz Clock select (Timer 1, 2) */
+#define TIMER_CTRL_CLKSEL_2K (0 << 3) /* 2KHz Clock Select (Timer 1, 2)*/
+
+/* Power and State Control */
+#define POWER_BASE __REG(0x80000400)
+#define POWER_PWRSR __REG(0x80000400) /* Power Status Register */
+#define POWER_PWRCNT __REG(0x80000404) /* Power/Clock control */
+#define POWER_HALT __REG(0x80000408) /* Power Idle Mode */
+#define POWER_STDBY __REG(0x8000040c) /* Power Standby Mode */
+#define POWER_BLEOI __REG(0x80000410) /* Battery Low End of Interrupt */
+#define POWER_MCEOI __REG(0x80000414) /* Media Changed EoI */
+#define POWER_TEOI __REG(0x80000418) /* Tick EoI */
+#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
+#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */
+
+#endif /* __ARM_ARCH_AAEC2000_H */
--- /dev/null
+/* linux/include/asm-arm/arch-aaec2000/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x80000000 @ physical
+ movne \rx, #io_p2v(0x80000000) @ virtual
+ orr \rx, \rx, #0x00000800
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #0x10]
+ tst \rd, #(1 << 7)
+ beq 1002b
+ .endm
+
+ .macro waituart,rd,rx
+#if 0
+1001: ldr \rd, [\rx, #0x10]
+ tst \rd, #(1 << 5)
+ beq 1001b
+#endif
+ .endm
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-aaec2000/dma.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS 0xffffffff
+#define MAX_DMA_CHANNELS 0
+
+#endif
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-aaec2000/entry-macro.S
+ *
+ * Low-level IRQ helper for aaec-2000 based platforms
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ mov r4, #0xf8000000
+ add r4, r4, #0x00000500
+ mov \base, r4
+ ldr \irqstat, [\base, #0]
+ cmp \irqstat, #0
+ bne 1001f
+ ldr \irqnr, =NR_IRQS+1
+ b 1003f
+1001: mov \irqnr, #0
+1002: ands \tmp, \irqstat, #1
+ mov \irqstat, \irqstat, LSR #1
+ add \irqnr, \irqnr, #1
+ beq 1002b
+ sub \irqnr, \irqnr, #1
+1003:
+ .endm
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-aaec2000/hardware.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <linux/config.h>
+
+/* The kernel is loaded at physical address 0xf8000000.
+ * We map the IO space a bit after
+ */
+#define PIO_APB_BASE 0x80000000
+#define VIO_APB_BASE 0xf8000000
+#define IO_APB_LENGTH 0x2000
+#define PIO_AHB_BASE 0x80002000
+#define VIO_AHB_BASE 0xf8002000
+#define IO_AHB_LENGTH 0x2000
+
+#define VIO_BASE VIO_APB_BASE
+#define PIO_BASE PIO_APB_BASE
+
+#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
+#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+/* FIXME: Is it needed to optimize this a la pxa ?? */
+#define __REG(x) (*((volatile u32 *)io_p2v(x)))
+#define __PREG(x) (io_v2p((u32)&(x)))
+
+#else /* __ASSEMBLY__ */
+
+#define __REG(x) io_p2v(x)
+#define __PREG(x) io_v2p(x)
+
+#endif
+
+#include "aaec2000.h"
+
+#endif /* __ASM_ARCH_HARDWARE_H */
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-aaec2000/io.h
+ *
+ * Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+#define __mem_isa(a) (a)
+
+#endif
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-aaec2000/irqs.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define INT_GPIOF0_FIQ 0 /* External GPIO Port F O Fast Interrupt Input */
+#define INT_BL_FIQ 1 /* Battery Low Fast Interrupt */
+#define INT_WE_FIQ 2 /* Watchdog Expired Fast Interrupt */
+#define INT_MV_FIQ 3 /* Media Changed Interrupt */
+#define INT_SC 4 /* Sound Codec Interrupt */
+#define INT_GPIO1 5 /* GPIO Port F Configurable Int 1 */
+#define INT_GPIO2 6 /* GPIO Port F Configurable Int 2 */
+#define INT_GPIO3 7 /* GPIO Port F Configurable Int 3 */
+#define INT_TMR1_OFL 8 /* Timer 1 Overflow Interrupt */
+#define INT_TMR2_OFL 9 /* Timer 2 Overflow Interrupt */
+#define INT_RTC_CM 10 /* RTC Compare Match Interrupt */
+#define INT_TICK 11 /* 64Hz Tick Interrupt */
+#define INT_UART1 12 /* UART1 Interrupt */
+#define INT_UART2 13 /* UART2 & Modem State Changed Interrupt */
+#define INT_LCD 14 /* LCD Interrupt */
+#define INT_SSI 15 /* SSI End of Transfer Interrupt */
+#define INT_UART3 16 /* UART3 Interrupt */
+#define INT_SCI 17 /* SCI Interrupt */
+#define INT_AAC 18 /* Advanced Audio Codec Interrupt */
+#define INT_MMC 19 /* MMC Interrupt */
+#define INT_USB 20 /* USB Interrupt */
+#define INT_DMA 21 /* DMA Interrupt */
+#define INT_TMR3_UOFL 22 /* Timer 3 Underflow Interrupt */
+#define INT_GPIO4 23 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO5 24 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO6 25 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO7 26 /* GPIO Port F Configurable Int 4 */
+#define INT_BMI 27 /* BMI Interrupt */
+
+#define NR_IRQS (INT_BMI + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-aaec2000/memory.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <linux/config.h>
+
+#define PHYS_OFFSET (0xf0000000UL)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/*
+ * The nodes are the followings:
+ *
+ * node 0: 0xf000.0000 - 0xf3ff.ffff
+ * node 1: 0xf400.0000 - 0xf7ff.ffff
+ * node 2: 0xf800.0000 - 0xfbff.ffff
+ * node 3: 0xfc00.0000 - 0xffff.ffff
+ */
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define KVADDR_TO_NID(addr) \
+ (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MAX_MEM_SHIFT)
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+#define PFN_TO_NID(pfn) \
+ (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MAX_MEM_SHIFT - PAGE_SHIFT))
+
+/*
+ * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
+ * and return the mem_map of that node.
+ */
+#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
+
+/*
+ * Given a page frame number, find the owning node of the memory
+ * and return the mem_map of that node.
+ */
+#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn))
+
+/*
+ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+#define LOCAL_MAP_NR(addr) \
+ (((unsigned long)(addr) & (NODE_MAX_MEM_SIZE - 1)) >> PAGE_SHIFT)
+
+#define NODE_MAX_MEM_SHIFT 26
+#define NODE_MAX_MEM_SIZE (1 << NODE_MAX_MEM_SHIFT)
+
+#else
+
+#define PFN_TO_NID(addr) (0)
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* __ASM_ARCH_MEMORY_H */
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-aaec2000/param.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_PARAM_H
+#define __ASM_ARCH_PARAM_H
+
+#endif /* __ASM_ARCH_PARAM_H */
+
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-aaed2000/system.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ cpu_reset(0);
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-aaec2000/timex.h
+ *
+ * AAEC-2000 Architecture timex specification
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE 508000
+
+#endif /* __ASM_ARCH_TIMEX_H */
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-aaec2000/uncompress.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include "hardware.h"
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+static void putstr( const char *s )
+{
+ unsigned long serial_port;
+ do {
+ serial_port = _UART3_BASE;
+ if (UART(UART_CR) & UART_CR_EN) break;
+ serial_port = _UART1_BASE;
+ if (UART(UART_CR) & UART_CR_EN) break;
+ serial_port = _UART2_BASE;
+ if (UART(UART_CR) & UART_CR_EN) break;
+ return;
+ } while (0);
+
+ for (; *s; s++) {
+ /* wait for space in the UART's transmitter */
+ while ((UART(UART_SR) & UART_SR_TxFF));
+ /* send the character out. */
+ UART(UART_DR) = *s;
+ /* if a LF, also do CR... */
+ if (*s == 10) {
+ while ((UART(UART_SR) & UART_SR_TxFF));
+ UART(UART_DR) = 13;
+ }
+ }
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-aaec2000/vmalloc.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
projects / linux-2.6 / commitdiff