]> err.no Git - linux-2.6/commitdiff
[WATCHDOG] alim remove pci_find_device
authorJiri Slaby <jirislaby@gmail.com>
Tue, 18 Jul 2006 16:30:00 +0000 (18:29 +0159)
committerWim Van Sebroeck <wim@iguana.be>
Mon, 2 Oct 2006 20:55:51 +0000 (22:55 +0200)
Convert pci_find_device to pci_get_device + pci_dev_put
in alim watchdog cards' drivers (refcounting).

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>
drivers/char/watchdog/alim1535_wdt.c
drivers/char/watchdog/alim7101_wdt.c

index c5c94e4c94950ba93035e01e4053c9d1cc916a58..0b2c8e841c8684bfe226dfcf049452b6af248ee4 100644 (file)
@@ -330,17 +330,20 @@ static int __init ali_find_watchdog(void)
        u32 wdog;
 
        /* Check for a 1535 series bridge */
-       pdev = pci_find_device(PCI_VENDOR_ID_AL, 0x1535, NULL);
+       pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x1535, NULL);
        if(pdev == NULL)
                return -ENODEV;
+       pci_dev_put(pdev);
 
        /* Check for the a 7101 PMU */
-       pdev = pci_find_device(PCI_VENDOR_ID_AL, 0x7101, NULL);
+       pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x7101, NULL);
        if(pdev == NULL)
                return -ENODEV;
 
-       if(pci_enable_device(pdev))
+       if(pci_enable_device(pdev)) {
+               pci_dev_put(pdev);
                return -EIO;
+       }
 
        ali_pci = pdev;
 
@@ -447,6 +450,7 @@ static void __exit watchdog_exit(void)
        /* Deregister */
        unregister_reboot_notifier(&ali_notifier);
        misc_deregister(&ali_miscdev);
+       pci_dev_put(ali_pci);
 }
 
 module_init(watchdog_init);
index ffd7684f999b3220572dbcf45cbe7a92b4a9b677..383f9bf6810c3b8f35a90e3ac97f1217edd25321 100644 (file)
@@ -333,6 +333,7 @@ static void __exit alim7101_wdt_unload(void)
        /* Deregister */
        misc_deregister(&wdt_miscdev);
        unregister_reboot_notifier(&wdt_notifier);
+       pci_dev_put(alim7101_pmu);
 }
 
 static int __init alim7101_wdt_init(void)
@@ -342,7 +343,8 @@ static int __init alim7101_wdt_init(void)
        char tmp;
 
        printk(KERN_INFO PFX "Steve Hill <steve@navaho.co.uk>.\n");
-       alim7101_pmu = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101,NULL);
+       alim7101_pmu = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101,
+               NULL);
        if (!alim7101_pmu) {
                printk(KERN_INFO PFX "ALi M7101 PMU not present - WDT not set\n");
                return -EBUSY;
@@ -351,21 +353,23 @@ static int __init alim7101_wdt_init(void)
        /* Set the WDT in the PMU to 1 second */
        pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, 0x02);
 
-       ali1543_south = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+       ali1543_south = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533,
+               NULL);
        if (!ali1543_south) {
                printk(KERN_INFO PFX "ALi 1543 South-Bridge not present - WDT not set\n");
-               return -EBUSY;
+               goto err_out;
        }
        pci_read_config_byte(ali1543_south, 0x5e, &tmp);
+       pci_dev_put(ali1543_south);
        if ((tmp & 0x1e) == 0x00) {
                if (!use_gpio) {
                        printk(KERN_INFO PFX "Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.\n");
-                       return -EBUSY;
+                       goto err_out;
                } 
                nowayout = 1;
        } else if ((tmp & 0x1e) != 0x12 && (tmp & 0x1e) != 0x00) {
                printk(KERN_INFO PFX "ALi 1543 South-Bridge does not have the correct revision number (???1001?) - WDT not set\n");
-               return -EBUSY;
+               goto err_out;
        }
 
        if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */
@@ -404,6 +408,7 @@ static int __init alim7101_wdt_init(void)
 err_out_miscdev:
        misc_deregister(&wdt_miscdev);
 err_out:
+       pci_dev_put(alim7101_pmu);
        return rc;
 }