]> err.no Git - linux-2.6/commitdiff
V4L/DVB (5750): Remove obsoleted support for PROC_FS on vicam.c
authorMauro Carvalho Chehab <mchehab@infradead.org>
Thu, 7 Jun 2007 11:26:37 +0000 (08:26 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Wed, 18 Jul 2007 17:23:59 +0000 (14:23 -0300)
Procfs support on V4L were converted to sysfs support by a pre-2.6 patch:

http://www.ussg.iu.edu/hypermail/linux/kernel/0307.1/2356.html

There's no sense on keeping the dead code inside vicam.c. Also,it won't
work anyway, as part of proc_fs support were previously inside
videodev.c.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/video/usbvideo/vicam.c

index 982b115193f855e5e6cdee2191b9b1ae1e11c78c..2d9c0dd3b733c02aeade8c1e72373857cec52816 100644 (file)
@@ -42,7 +42,6 @@
 #include <linux/usb.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
-#include <linux/proc_fs.h>
 #include <linux/mutex.h>
 #include "usbvideo.h"
 
@@ -417,11 +416,6 @@ struct vicam_camera {
        u8 open_count;
        u8 bulkEndpoint;
        int needsDummyRead;
-
-#if defined(CONFIG_VIDEO_PROC_FS)
-       struct proc_dir_entry *proc_dir;
-#endif
-
 };
 
 static int vicam_probe( struct usb_interface *intf, const struct usb_device_id *id);
@@ -1065,175 +1059,6 @@ vicam_mmap(struct file *file, struct vm_area_struct *vma)
        return 0;
 }
 
-#if defined(CONFIG_VIDEO_PROC_FS)
-
-static struct proc_dir_entry *vicam_proc_root = NULL;
-
-static int vicam_read_helper(char *page, char **start, off_t off,
-                               int count, int *eof, int value)
-{
-       char *out = page;
-       int len;
-
-       out += sprintf(out, "%d",value);
-
-       len = out - page;
-       len -= off;
-       if (len < count) {
-               *eof = 1;
-               if (len <= 0)
-                       return 0;
-       } else
-               len = count;
-
-       *start = page + off;
-       return len;
-}
-
-static int vicam_read_proc_shutter(char *page, char **start, off_t off,
-                               int count, int *eof, void *data)
-{
-       return vicam_read_helper(page,start,off,count,eof,
-                               ((struct vicam_camera *)data)->shutter_speed);
-}
-
-static int vicam_read_proc_gain(char *page, char **start, off_t off,
-                               int count, int *eof, void *data)
-{
-       return vicam_read_helper(page,start,off,count,eof,
-                               ((struct vicam_camera *)data)->gain);
-}
-
-static int
-vicam_write_proc_shutter(struct file *file, const char *buffer,
-                        unsigned long count, void *data)
-{
-       u16 stmp;
-       char kbuf[8];
-       struct vicam_camera *cam = (struct vicam_camera *) data;
-
-       if (count > 6)
-               return -EINVAL;
-
-       if (copy_from_user(kbuf, buffer, count))
-               return -EFAULT;
-
-       stmp = (u16) simple_strtoul(kbuf, NULL, 10);
-       if (stmp < 4 || stmp > 32000)
-               return -EINVAL;
-
-       cam->shutter_speed = stmp;
-
-       return count;
-}
-
-static int
-vicam_write_proc_gain(struct file *file, const char *buffer,
-                     unsigned long count, void *data)
-{
-       u16 gtmp;
-       char kbuf[8];
-
-       struct vicam_camera *cam = (struct vicam_camera *) data;
-
-       if (count > 4)
-               return -EINVAL;
-
-       if (copy_from_user(kbuf, buffer, count))
-               return -EFAULT;
-
-       gtmp = (u16) simple_strtoul(kbuf, NULL, 10);
-       if (gtmp > 255)
-               return -EINVAL;
-       cam->gain = gtmp;
-
-       return count;
-}
-
-static void
-vicam_create_proc_root(void)
-{
-       vicam_proc_root = proc_mkdir("video/vicam", NULL);
-
-       if (vicam_proc_root)
-               vicam_proc_root->owner = THIS_MODULE;
-       else
-               printk(KERN_ERR
-                      "could not create /proc entry for vicam!");
-}
-
-static void
-vicam_destroy_proc_root(void)
-{
-       if (vicam_proc_root)
-               remove_proc_entry("video/vicam", 0);
-}
-
-static void
-vicam_create_proc_entry(struct vicam_camera *cam)
-{
-       char name[64];
-       struct proc_dir_entry *ent;
-
-       DBG(KERN_INFO "vicam: creating proc entry\n");
-
-       if (!vicam_proc_root || !cam) {
-               printk(KERN_INFO
-                      "vicam: could not create proc entry, %s pointer is null.\n",
-                      (!cam ? "camera" : "root"));
-               return;
-       }
-
-       sprintf(name, "video%d", cam->vdev.minor);
-
-       cam->proc_dir = proc_mkdir(name, vicam_proc_root);
-
-       if ( !cam->proc_dir )
-               return; // FIXME: We should probably return an error here
-
-       ent = create_proc_entry("shutter", S_IFREG | S_IRUGO | S_IWUSR,
-                               cam->proc_dir);
-       if (ent) {
-               ent->data = cam;
-               ent->read_proc = vicam_read_proc_shutter;
-               ent->write_proc = vicam_write_proc_shutter;
-               ent->size = 64;
-       }
-
-       ent = create_proc_entry("gain", S_IFREG | S_IRUGO | S_IWUSR,
-                               cam->proc_dir);
-       if (ent) {
-               ent->data = cam;
-               ent->read_proc = vicam_read_proc_gain;
-               ent->write_proc = vicam_write_proc_gain;
-               ent->size = 64;
-       }
-}
-
-static void
-vicam_destroy_proc_entry(void *ptr)
-{
-       struct vicam_camera *cam = (struct vicam_camera *) ptr;
-       char name[16];
-
-       if ( !cam->proc_dir )
-               return;
-
-       sprintf(name, "video%d", cam->vdev.minor);
-       remove_proc_entry("shutter", cam->proc_dir);
-       remove_proc_entry("gain", cam->proc_dir);
-       remove_proc_entry(name,vicam_proc_root);
-       cam->proc_dir = NULL;
-
-}
-
-#else
-static inline void vicam_create_proc_root(void) { }
-static inline void vicam_destroy_proc_root(void) { }
-static inline void vicam_create_proc_entry(struct vicam_camera *cam) { }
-static inline void vicam_destroy_proc_entry(void *ptr) { }
-#endif
-
 static const struct file_operations vicam_fops = {
        .owner          = THIS_MODULE,
        .open           = vicam_open,
@@ -1330,8 +1155,6 @@ vicam_probe( struct usb_interface *intf, const struct usb_device_id *id)
                return -EIO;
        }
 
-       vicam_create_proc_entry(cam);
-
        printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n",cam->vdev.minor);
 
        usb_set_intfdata (intf, cam);
@@ -1363,8 +1186,6 @@ vicam_disconnect(struct usb_interface *intf)
 
        cam->udev = NULL;
 
-       vicam_destroy_proc_entry(cam);
-
        /* the only thing left to do is synchronize with
         * our close/release function on who should release
         * the camera memory. if there are any users using the
@@ -1390,7 +1211,6 @@ usb_vicam_init(void)
 {
        int retval;
        DBG(KERN_INFO "ViCam-based WebCam driver startup\n");
-       vicam_create_proc_root();
        retval = usb_register(&vicam_driver);
        if (retval)
                printk(KERN_WARNING "usb_register failed!\n");
@@ -1404,7 +1224,6 @@ usb_vicam_exit(void)
               "ViCam-based WebCam driver shutdown\n");
 
        usb_deregister(&vicam_driver);
-       vicam_destroy_proc_root();
 }
 
 module_init(usb_vicam_init);