*.o
-*.a
-udevd
-udevadm
-udev_version.h
-test-udev
-
+*.lo
+*.la
+.libs/
+.deps/
+Makefile
+Makefile.in
+aclocal.m4
+autom4te.cache/
+config.h
+config.h.in
+config.log
+config.status
+config.guess
+config.sub
+libtool
+ltmain.sh
+install-sh
+missing
+configure
+stamp-h1
+depcomp
+udev-test-install/
--- /dev/null
+ ./configure
+ --prefix=
+ "/usr" - prefix for man pages, include files
+ --exec-prefix=
+ "" - the root filesystem, prefix for libs and binaries
+ --sysconfdir=
+ "/etc"
+ --with-libdir-name=
+ "lib" - directory name for libraries, not a path name
+ multilib 64bit systems may use "lib64" instead of "lib"
+ --enable-debug
+ compile-in verbose debug messages
+ --disable-logging
+ disable all logging and compile-out all log strings
+ --enable-selinux
+ link against SELInux libraries to set the expected context
+ for created files
+
+The installation directories are controlled by $prefix, $exec_prefix
+$sysconfdir and $libdir-name. Documentation, development files are
+installed below $prefix, binaries are installed below $exec_prefix,
+libraries below $exec_prefix/$libdir-name.
+
+The default configuration for a RPM spec file may look like:
+ --prefix=%{_prefix}
+ --exec-prefix=""
+ --sysconfdir=%{_sysconfdir}
+ --with-libdir-name=%{_lib}
+
+The well defined location for scripts and binaries which are called
+from rules is /lib/udev/ on all systems and architectures, anything
+else is broken. Other packages who use udev, may use the /lib/udev/
+directory to install their rule helper and udev rule files.
+
+It is recommended to use the /lib/udev/devices/ directory to place
+device nodes, directories and symlinks, which are copied to /dev/
+at every bootup. That way, nodes for devices which can not be
+detected automatically, or are activated on-demand by opening the
+pre-existing device node, will be available.
+
+Default udev rules and persistent device naming rules are required
+by other software that depends on the data udev collects from the
+devices, and should therefore be installed by default with every udev
+installation.
--- /dev/null
+SUBDIRS = \
+ udev \
+ rules \
+ extras
+
+udevconfdir = $(sysconfdir)/udev
+udevconf_DATA = \
+ udev.conf
+
+EXTRA_DIST = \
+ udev.conf \
+ docs \
+ autogen.sh
+
+distclean-local:
+ rm -f *~
+ rm -rf autom4te.cache
+ rm -f depcomp aclocal.m4 config.h.in configure install-sh
+ rm -f Makefile.in missing config.guess config.sub ltmain.sh
+ rm -rf udev-test-install
+ rm -f udev-$(VERSION).tar.gz udev-$(VERSION).tar.bz2
+
+ChangeLog:
+ @ mv $@ $@.tmp
+ @ echo "Summary of changes from v$(shell echo $$(($(VERSION) - 1))) to v$(VERSION)" >> $@
+ @ echo "============================================" >> $@
+ @ echo >> $@
+ @ git log --pretty=short $(shell echo $$(($(VERSION) - 1)))..HEAD | git shortlog >> $@
+ @ echo >> $@
+ @ cat $@
+ @ cat $@.tmp >> $@
+ @ rm $@.tmp
+
+test-run:
+ cd test && ./udev-test.pl
+
+test-install:
+ rm -rf $(PWD)/udev-test-install/
+ make DESTDIR=$(PWD)/udev-test-install install
+ tree $(PWD)/udev-test-install/
+
+udev 126
+========
+We use ./configure now. See INSTALL for details. Current
+options are:
+ --prefix=
+ "/usr" - prefix for man pages, include files
+ --exec-prefix=
+ "" - the root filesystem, prefix for libs and binaries
+ --sysconfdir=
+ "/etc"
+ --with-libdir-name=
+ "lib" - directory name for libraries, not a path name
+ multilib 64bit systems may use "lib64" instead of "lib"
+ --enable-debug
+ compile-in verbose debug messages
+ --disable-logging
+ disable all logging and compile-out all log strings
+ --enable-selinux
+ link against SELInux libraries to set the expected context
+ for created files
+
+No symlinks to udevadm are installed anymore, if still neded, the
+package should create them.
+
udev 125
========
Bugfixes.
(unix domain sockets (CONFIG_UNIX) as a loadable kernel module may work,
but it does not make any sense - don't complain if anything goes wrong.)
- - The proc filesystem must be mounted on /proc, the sysfs filesystem must
- be mounted at /sys. No other locations are supported by udev.
+ - The proc filesystem must be mounted on /proc/, the sysfs filesystem must
+ be mounted at /sys/. No other locations are supported by udev.
Operation:
- Udev creates and removes device nodes in /dev, based on events the kernel
+ Udev creates and removes device nodes in /dev/, based on events the kernel
sends out on device discovery or removal.
- - Very early in the boot process, the /dev directory should get a 'tmpfs'
+ - Very early in the boot process, the /dev/ directory should get a 'tmpfs'
filesystem mounted, which is populated from scratch by udev. Created nodes
or changed permissions will not survive a reboot, which is intentional.
- - The content of /lib/udev/devices directory which contains the nodes,
+ - The content of /lib/udev/devices/ directory which contains the nodes,
symlinks and directories, which are always expected to be in /dev, should
be copied over to the tmpfs mounted /dev, to provide the required nodes
to initialize udev and continue booting.
device node with the default kernel name, or the one specified by a
matching udev rule.
-
-Compile Options:
- DESTDIR
- Prefix of install target, used for package building.
- USE_LOG
- If set to 'true', udev is able to pass errors or debug information
- to syslog. This is very useful to see what udev is doing or not doing.
- It is enabled by default, don't expect any useful answer, if you
- need to hunt a bug, but you can't enable syslog.
- DEBUG
- If set to 'true', very verbose debugging messages will be compiled
- into the udev binaries. The actual level of debugging is specified
- in the udev config file.
- USE_SELINUX
- If set to 'true', udev will be built with SELinux support
- enabled. This is disabled by default.
- EXTRAS
- list of helper programs in extras/ to build.
- make EXTRAS="extras/cdrom_id extras/scsi_id extras/volume_id"
-
-
-Installation:
- - The install target intalls the udev binaries in the default locations,
- All binaries will be installed in /lib/udev or /sbin.
-
- - The default location for scripts and binaries that are called from
- rules is /lib/udev. Other packages who install udev rules, may use
- that directory too.
-
- - It is recommended to use the /lib/udev/devices/ directory to place
- device nodes and symlinks in, which are copied to /dev at every boot.
- That way, nodes for broken subsystems or devices which can't be
- detected automatically by the kernel, will always be available.
-
- - Default udev rules and persistent device naming rules are required by other
- software that depends on the data udev collects from the devices,
- and should be installed by default with every udev installation.
-
-Please direct any comment/question/concern to the linux-hotplug-devel mailing list at:
+Please direct any comment/question/concern to the linux-hotplug mailing list at:
linux-hotplug@vger.kernel.org
--- /dev/null
+#!/bin/sh -e
+
+(autopoint --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have autopoint installed to generate the build system.."
+ echo
+ exit 1
+}
+(autoconf --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have autoconf installed to generate the build system."
+ echo
+ exit 1
+}
+(libtoolize --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have libtool installed to generate the build system."
+ echo
+ exit 1
+}
+(autoheader --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have autoheader installed to generate the build system."
+ echo
+ exit 1
+}
+(automake --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have automake installed to generate the build system."
+ echo
+ exit 1
+}
+
+test -f udev/udevd.c || {
+ echo "You must run this script in the top-level source directory"
+ exit 1
+}
+
+echo " aclocal: $(aclocal --version | head -1)"
+aclocal
+echo " autoconf: $(autoconf --version | head -1)"
+autoconf
+echo " libtool: $(automake --version | head -1)"
+libtoolize --force
+echo " autoheader: $(autoheader --version | head -1)"
+autoheader
+echo " automake: $(automake --version | head -1)"
+automake --add-missing
+
+if test -z "$@"; then
+ args="--prefix=/usr --exec-prefix= --sysconfdir=/etc"
+else
+ args=$@
+fi
+echo " configure: $args"
+echo
+./configure $args
--- /dev/null
+AC_INIT(udev,
+ 126,
+ kay.sievers@vrfy.org)
+
+AC_PREREQ(2.60)
+AC_CONFIG_SRCDIR(udev/udevd.c)
+AM_INIT_AUTOMAKE([check-news foreign -Wall 1.9 dist-bzip2])
+AC_GNU_SOURCE
+AC_DISABLE_STATIC
+AC_SYS_LARGEFILE
+AC_PROG_LIBTOOL
+
+dnl /* libvolume_id version */
+VOLID_LT_CURRENT=0
+VOLID_LT_REVISION=86
+VOLID_LT_AGE=0
+AC_SUBST(VOLID_LT_CURRENT)
+AC_SUBST(VOLID_LT_REVISION)
+AC_SUBST(VOLID_LT_AGE)
+
+AC_PATH_PROG([XSLTPROC], [xsltproc])
+
+AC_CHECK_LIB(c, inotify_init,
+ [AC_DEFINE([HAVE_INOTIFY], 1, [inotify available])],
+ [AC_MSG_WARN([inotify support disabled])])
+
+AC_CHECK_LIB(c, strlcpy,
+ [AC_DEFINE([HAVE_STRLCPY], 1, [strlcpy available])],
+ [])
+
+AC_ARG_WITH(udev-prefix,
+ AS_HELP_STRING([--with-udev-prefix=DIR], [add prefix to internal udev path names]),
+ [], [with_udev_prefix='${exec_prefix}'])
+udev_prefix=$with_udev_prefix
+AC_SUBST(udev_prefix)
+
+AC_ARG_WITH(libdir-name,
+ AS_HELP_STRING([--with-libdir-name=DIR], [name of the arch lib directory]),
+ [], [with_libdir_name=lib])
+libdir_name=$with_libdir_name
+AC_SUBST(libdir_name)
+
+AC_ARG_WITH(selinux,
+ AS_HELP_STRING([--with-selinux], [compile with SELinux support]),
+ [], with_selinux=no)
+if test "x$with_selinux" = xyes; then
+ LIBS_save=$LIBS
+ AC_CHECK_LIB(selinux, getprevcon,
+ [],
+ AC_MSG_ERROR([SELinux selected but libselinux not found]))
+ LIBS=$LIBS_save
+ AC_DEFINE(USE_SELINUX, [1] ,[compile with SELinux support])
+ SELINUX_LIBS="-lselinux"
+fi
+AC_SUBST([SELINUX_LIBS])
+AM_CONDITIONAL(USE_SELINUX, [test "x$with_selinux" = xyes], [compile with SELinux support])
+
+AC_ARG_ENABLE(debug,
+ AS_HELP_STRING([--enable-debug], [turn on debugging]),
+ [], enable_debug=no)
+if test "x$enable_debug" = "xyes"; then
+ AC_DEFINE(DEBUG, [1] ,[Compile in debug messages])
+ DEBUG_CFLAGS="-DDEBUG"
+fi
+AC_SUBST(DEBUG_CFLAGS)
+
+AC_ARG_ENABLE(logging,
+ AS_HELP_STRING([--disable-logging], [turn off logging/syslog]),
+ [], enable_logging=yes)
+if test "x$enable_logging" != "xno"; then
+ AC_DEFINE(USE_LOG, [1] ,[Use logging/syslog])
+fi
+
+AC_CONFIG_HEADERS(config.h)
+AC_CONFIG_FILES([
+ Makefile
+ udev/Makefile
+ rules/Makefile
+ extras/Makefile
+ extras/ata_id/Makefile
+ extras/cdrom_id/Makefile
+ extras/edd_id/Makefile
+ extras/path_id/Makefile
+ extras/firmware/Makefile
+ extras/collect/Makefile
+ extras/floppy/Makefile
+ extras/fstab_import/Makefile
+ extras/rule_generator/Makefile
+ extras/scsi_id/Makefile
+ extras/usb_id/Makefile
+ extras/volume_id/Makefile
+ extras/volume_id/lib/Makefile
+ extras/volume_id/lib/libvolume_id.pc
+])
+AC_OUTPUT
+
+echo "
+ udev $VERSION
+ ========
+
+ prefix: ${prefix}
+ exec_prefix: ${exec_prefix}
+ udev_prefix: ${udev_prefix}
+ libdir_name: ${libdir_name}
+ datarootdir: ${datarootdir}
+ mandir: ${mandir}
+ includedir: ${includedir}
+
+ logging: ${enable_logging}
+ debug: ${enable_debug}
+ selinux: ${with_selinux}
+
+ compiler: ${CC}
+ cflags: ${CFLAGS}
+ ldflags: ${LDFLAGS}
+
+ xsltproc: ${XSLTPROC}
+"
--- /dev/null
+SUBDIRS = \
+ ata_id \
+ cdrom_id \
+ edd_id \
+ path_id \
+ firmware \
+ collect \
+ floppy \
+ fstab_import \
+ rule_generator \
+ scsi_id \
+ usb_id \
+ volume_id
+
+distclean-local:
+ rm -f Makefile.in
--- /dev/null
+udevhomedir = $(udev_prefix)/lib/udev
+udevhome_PROGRAMS = \
+ ata_id
+
+AM_CPPFLAGS = \
+ -DSYSCONFDIR=\""$(sysconfdir)"\" \
+ -DUDEV_PREFIX=\""$(udev_prefix)"\"
+
+ata_id_SOURCES = \
+ ata_id.c \
+ ../../udev/udev_sysdeps.c \
+ ../../udev/udev_utils.c \
+ ../../udev/udev_utils_string.c
+
+dist_man_MANS = \
+ ata_id.8
+
+distclean-local:
+ rm -f Makefile.in
+
#include <linux/types.h>
#include <linux/hdreg.h>
-#include "../../udev.h"
+#include "../../udev/udev.h"
#ifdef USE_LOG
void log_message(int priority, const char *format, ...)
--- /dev/null
+udevhomedir = $(udev_prefix)/lib/udev
+udevhome_PROGRAMS = \
+ cdrom_id
+
+udevrulesdir = $(udev_prefix)/lib/udev/rules.d
+dist_udevrules_DATA = \
+ 60-cdrom_id.rules
+
+AM_CPPFLAGS = \
+ -DSYSCONFDIR=\""$(sysconfdir)"\" \
+ -DUDEV_PREFIX=\""$(udev_prefix)"\"
+
+cdrom_id_SOURCES = \
+ cdrom_id.c \
+ ../../udev/udev_sysdeps.c \
+ ../../udev/udev_utils.c \
+ ../../udev/udev_utils_string.c
+
+dist_man_MANS = \
+ cdrom_id.8
+
+distclean-local:
+ rm -f Makefile.in
+
#include <sys/time.h>
#include <sys/ioctl.h>
#include <linux/cdrom.h>
-#include "../../udev.h"
+
+#include "../../udev/udev.h"
#ifndef ARRAY_SIZE
#define ARRAY_SIZE(a) (sizeof(a) / sizeof(a[0]))
--- /dev/null
+udevhomedir = $(udev_prefix)/lib/udev
+udevhome_PROGRAMS = \
+ collect
+
+AM_CPPFLAGS = \
+ -DSYSCONFDIR=\""$(sysconfdir)"\" \
+ -DUDEV_PREFIX=\""$(udev_prefix)"\"
+
+distclean-local:
+ rm -f Makefile.in
+
#include <sys/types.h>
#include <sys/stat.h>
-#include "../../list.h"
+#include "../../udev/list.h"
-#define TMPFILE "/dev/.udev/collect"
+#define TMPFILE UDEV_PREFIX "/dev/.udev/collect"
#define BUFSIZE 16
#define UDEV_ALARM_TIMEOUT 180
--- /dev/null
+udevhomedir = $(udev_prefix)/lib/udev
+udevhome_PROGRAMS = \
+ edd_id
+
+udevrulesdir = $(udev_prefix)/lib/udev/rules.d
+dist_udevrules_DATA = \
+ 61-persistent-storage-edd.rules
+
+AM_CPPFLAGS = \
+ -DSYSCONFDIR=\""$(sysconfdir)"\" \
+ -DUDEV_PREFIX=\""$(udev_prefix)"\"
+
+edd_id_SOURCES = \
+ edd_id.c \
+ ../../udev/udev_sysdeps.c \
+ ../../udev/udev_utils.c \
+ ../../udev/udev_utils_string.c
+
+dist_man_MANS = \
+ edd_id.8
+
+distclean-local:
+ rm -f Makefile.in
+
#include <dirent.h>
#include <stdint.h>
-#include "../../udev.h"
+#include "../../udev/udev.h"
#ifdef USE_LOG
void log_message(int priority, const char *format, ...)
--- /dev/null
+udevhomedir = $(udev_prefix)/lib/udev
+dist_udevhome_SCRIPTS = \
+ firmware.sh
+
+distclean-local:
+ rm -f Makefile.in
+
--- /dev/null
+udevhomedir = $(udev_prefix)/lib/udev
+udevhome_PROGRAMS = \
+ create_floppy_devices
+
+AM_CPPFLAGS = \
+ -DSYSCONFDIR=\""$(sysconfdir)"\" \
+ -DUDEV_PREFIX=\""$(udev_prefix)"\"
+
+create_floppy_devices_SOURCES = \
+ create_floppy_devices.c \
+ ../../udev/udev_config.c \
+ ../../udev/udev_sysdeps.c \
+ ../../udev/udev_utils.c \
+ ../../udev/udev_utils_string.c \
+ ../../udev/udev_utils_file.c
+if USE_SELINUX
+create_floppy_devices_SOURCES += \
+ ../../udev/udev_selinux.c
+
+create_floppy_devices_LDADD = \
+ $(SELINUX_LIBS)
+endif
+
+dist_man_MANS = \
+ create_floppy_devices.8
+
+distclean-local:
+ rm -f Makefile.in
+
#include <pwd.h>
#include <grp.h>
-#include "../../udev.h"
-#include "../../udev_selinux.h"
+#include "../../udev/udev.h"
+#include "../../udev/udev_selinux.h"
static char *table[] = {
"", "d360", "h1200", "u360", "u720", "h360", "h720",
--- /dev/null
+udevhomedir = $(udev_prefix)/lib/udev
+udevhome_PROGRAMS = \
+ fstab_import
+
+udevrulesdir = $(udev_prefix)/lib/udev/rules.d
+dist_udevrules_DATA = \
+ 79-fstab_import.rules
+
+AM_CPPFLAGS = \
+ -DSYSCONFDIR=\""$(sysconfdir)"\" \
+ -DUDEV_PREFIX=\""$(udev_prefix)"\"
+
+fstab_import_SOURCES = \
+ fstab_import.c \
+ ../../udev/udev_sysdeps.c \
+ ../../udev/udev_utils.c \
+ ../../udev/udev_utils_string.c
+
+distclean-local:
+ rm -f Makefile.in
+
#include <mntent.h>
#include <sys/stat.h>
-#include "../../udev.h"
+#include "../../udev/udev.h"
static int debug;
static char root[PATH_SIZE] = "/dev";
--- /dev/null
+udevhomedir = $(udev_prefix)/lib/udev
+dist_udevhome_SCRIPTS = \
+ path_id
+
+dist_man_MANS = \
+ path_id.8
+
+distclean-local:
+ rm -f Makefile.in
+
--- /dev/null
+udevhomedir = $(udev_prefix)/lib/udev
+dist_udevhome_SCRIPTS = \
+ write_cd_rules \
+ write_net_rules
+
+dist_udevhome_DATA = \
+ rule_generator.functions
+
+udevrulesdir = $(udev_prefix)/lib/udev/rules.d
+dist_udevrules_DATA = \
+ 75-cd-aliases-generator.rules \
+ 75-persistent-net-generator.rules
+
+distclean-local:
+ rm -f Makefile.in
+
--- /dev/null
+udevhomedir = $(udev_prefix)/lib/udev
+udevhome_PROGRAMS = \
+ scsi_id
+
+AM_CPPFLAGS = \
+ -DSYSCONFDIR=\""$(sysconfdir)"\" \
+ -DUDEV_PREFIX=\""$(udev_prefix)"\"
+
+scsi_id_SOURCES = \
+ scsi_id.c \
+ scsi_serial.c \
+ scsi.h \
+ scsi_id.h \
+ bsg.h \
+ ../../udev/udev_sysdeps.c \
+ ../../udev/udev_utils.c \
+ ../../udev/udev_utils_string.c
+
+dist_sysconf_DATA = \
+ scsi_id.config
+
+dist_man_MANS = \
+ scsi_id.8
+
+distclean-local:
+ rm -f Makefile.in
+
* Free Software Foundation version 2 of the License.
*/
+#include "config.h"
+
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <getopt.h>
#include <sys/stat.h>
-#include "../../udev.h"
+#include "../../udev/udev.h"
#include "scsi_id.h"
-#include "scsi_id_version.h"
static const struct option options[] = {
{ "device", 1, NULL, 'd' },
static int all_good;
static int dev_specified;
-static char config_file[MAX_PATH_LEN] = SCSI_ID_CONFIG_FILE;
+static char config_file[MAX_PATH_LEN] = SYSCONFDIR "/scsi_id.config";
static enum page_code default_page_code;
static int sg_version = 4;
static int use_stderr;
break;
case 'V':
- printf("%s\n", SCSI_ID_VERSION);
+ printf("%s\n", VERSION);
exit(0);
break;
/* #include <linux/bsg.h> */
#include "bsg.h"
-#include "../../udev.h"
+#include "../../udev/udev.h"
#include "scsi.h"
#include "scsi_id.h"
-#include "scsi_id_version.h"
/*
* A priority based list of id, naa, and binary/ascii for the identifier
--- /dev/null
+udevhomedir = $(udev_prefix)/lib/udev
+udevhome_PROGRAMS = \
+ usb_id
+
+AM_CPPFLAGS = \
+ -DSYSCONFDIR=\""$(sysconfdir)"\" \
+ -DUDEV_PREFIX=\""$(udev_prefix)"\"
+
+usb_id_SOURCES = \
+ usb_id.c \
+ ../../udev/udev_sysfs.c \
+ ../../udev/udev_sysdeps.c \
+ ../../udev/udev_utils.c \
+ ../../udev/udev_utils_string.c
+
+distclean-local:
+ rm -f Makefile.in
+
#include <errno.h>
#include <getopt.h>
-#include "../../udev.h"
+#include "../../udev/udev.h"
#define MAX_PATH_LEN 512
#define MAX_SERIAL_LEN 256
--- /dev/null
+SUBDIRS = \
+ lib
+
+udevhomedir = $(udev_prefix)/lib/udev
+udevhome_PROGRAMS = \
+ vol_id
+
+AM_CPPFLAGS = \
+ -DSYSCONFDIR=\""$(sysconfdir)"\" \
+ -DUDEV_PREFIX=\""$(udev_prefix)"\"
+
+vol_id_SOURCES = \
+ vol_id.c \
+ ../../udev/udev_sysdeps.c \
+ ../../udev/udev_utils.c \
+ ../../udev/udev_utils_string.c
+
+vol_id_LDADD = \
+ lib/libvolume_id.la
+
+dist_man_MANS = \
+ vol_id.8
+
+EXTRA_DIST = \
+ vol_id.xml
+
+%.7 %.8 : %.xml
+ $(XSLTPROC) -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
+
+distclean-local:
+ rm -f Makefile.in
+ rm -f $(dist_man_MANS)
+
--- /dev/null
+rootlibdir = $(exec_prefix)/$(libdir_name)
+rootlib_LTLIBRARIES = \
+ libvolume_id.la
+
+include_HEADERS =\
+ libvolume_id.h
+
+libvolume_id_la_SOURCES =\
+ ext.c \
+ fat.c \
+ hfs.c \
+ highpoint.c \
+ isw_raid.c \
+ lsi_raid.c \
+ via_raid.c \
+ silicon_raid.c \
+ nvidia_raid.c \
+ promise_raid.c \
+ adaptec_raid.c \
+ jmicron_raid.c \
+ ddf_raid.c \
+ iso9660.c \
+ jfs.c \
+ linux_raid.c \
+ linux_swap.c \
+ lvm.c \
+ ntfs.c \
+ reiserfs.c \
+ udf.c \
+ ufs.c \
+ xfs.c \
+ cramfs.c \
+ hpfs.c \
+ romfs.c \
+ sysv.c \
+ minix.c \
+ gfs.c \
+ luks.c \
+ ocfs.c \
+ vxfs.c \
+ squashfs.c \
+ netware.c \
+ oracleasm.c \
+ volume_id.c \
+ util.h \
+ util.c
+
+libvolume_id_la_LDFLAGS = \
+ -version-info $(VOLID_LT_CURRENT):$(VOLID_LT_REVISION):$(VOLID_LT_AGE) \
+ -export-symbols $(top_srcdir)/extras/volume_id/lib/exported_symbols
+
+# move devel files to $(prefix)$(libdir_name) if needed
+install-data-hook:
+ rm $(DESTDIR)$(rootlibdir)/libvolume_id.la
+ if test "$(prefix)" != "$(exec_prefix)"; then \
+ rm $(DESTDIR)$(rootlibdir)/libvolume_id.so; \
+ mkdir -p $(DESTDIR)$(prefix)/$(libdir_name); \
+ ln -sf $(rootlibdir)/libvolume_id.so.$(VOLID_LT_CURRENT).$(VOLID_LT_AGE).$(VOLID_LT_REVISION) \
+ $(DESTDIR)$(prefix)/$(libdir_name)/libvolume_id.so; \
+ fi
+
+EXTRA_DIST = \
+ exported_symbols
+
+pkgconfigdir = $(prefix)/$(libdir_name)/pkgconfig
+pkgconfig_DATA = libvolume_id.pc
+
+distclean-local:
+ rm -f Makefile.in
-{ global:
- volume_id_log_fn;
-
- volume_id_get_label;
- volume_id_get_label_raw;
- volume_id_get_uuid;
- volume_id_get_uuid_raw;
- volume_id_get_usage;
- volume_id_get_type;
- volume_id_get_type_version;
-
- volume_id_open_fd;
- volume_id_close;
- volume_id_probe_all;
- volume_id_probe_filesystem;
- volume_id_probe_raid;
- volume_id_all_probers;
- volume_id_get_prober_by_type;
- volume_id_encode_string;
-
- volume_id_open_node;
-
- volume_id_probe_linux_swap;
- volume_id_probe_luks;
- volume_id_probe_cramfs;
- volume_id_probe_ext;
- volume_id_probe_vfat;
- volume_id_probe_hfs_hfsplus;
- volume_id_probe_hpfs;
- volume_id_probe_iso9660;
- volume_id_probe_jfs;
- volume_id_probe_minix;
- volume_id_probe_ntfs;
- volume_id_probe_ocfs1;
- volume_id_probe_ocfs2;
- volume_id_probe_reiserfs;
- volume_id_probe_romfs;
- volume_id_probe_sysv;
- volume_id_probe_udf;
- volume_id_probe_ufs;
- volume_id_probe_vxfs;
- volume_id_probe_xfs;
- volume_id_probe_squashfs;
- volume_id_probe_netware;
- volume_id_probe_gfs;
- volume_id_probe_gfs2;
-
- volume_id_probe_linux_raid;
- volume_id_probe_lvm1;
- volume_id_probe_lvm2;
- volume_id_probe_ddf_raid;
- volume_id_probe_intel_software_raid;
- volume_id_probe_highpoint_37x_raid;
- volume_id_probe_highpoint_45x_raid;
- volume_id_probe_lsi_mega_raid;
- volume_id_probe_nvidia_raid;
- volume_id_probe_promise_fasttrack_raid;
- volume_id_probe_silicon_medley_raid;
- volume_id_probe_via_raid;
- volume_id_probe_adaptec_raid;
- volume_id_probe_jmicron_raid;
-local:
- *;
-};
+volume_id_log_fn
+volume_id_get_label
+volume_id_get_label_raw
+volume_id_get_uuid
+volume_id_get_uuid_raw
+volume_id_get_usage
+volume_id_get_type
+volume_id_get_type_version
+volume_id_open_fd
+volume_id_close
+volume_id_probe_all
+volume_id_probe_filesystem
+volume_id_probe_raid
+volume_id_all_probers
+volume_id_get_prober_by_type
+volume_id_encode_string
+volume_id_open_node
+volume_id_probe_linux_swap
+volume_id_probe_luks
+volume_id_probe_cramfs
+volume_id_probe_ext
+volume_id_probe_vfat
+volume_id_probe_hfs_hfsplus
+volume_id_probe_hpfs
+volume_id_probe_iso9660
+volume_id_probe_jfs
+volume_id_probe_minix
+volume_id_probe_ntfs
+volume_id_probe_ocfs1
+volume_id_probe_ocfs2
+volume_id_probe_reiserfs
+volume_id_probe_romfs
+volume_id_probe_sysv
+volume_id_probe_udf
+volume_id_probe_ufs
+volume_id_probe_vxfs
+volume_id_probe_xfs
+volume_id_probe_squashfs
+volume_id_probe_netware
+volume_id_probe_gfs
+volume_id_probe_gfs2
+volume_id_probe_linux_raid
+volume_id_probe_lvm1
+volume_id_probe_lvm2
+volume_id_probe_ddf_raid
+volume_id_probe_intel_software_raid
+volume_id_probe_highpoint_37x_raid
+volume_id_probe_highpoint_45x_raid
+volume_id_probe_lsi_mega_raid
+volume_id_probe_nvidia_raid
+volume_id_probe_promise_fasttrack_raid
+volume_id_probe_silicon_medley_raid
+volume_id_probe_via_raid
+volume_id_probe_adaptec_raid
+volume_id_probe_jmicron_raid
--- /dev/null
+prefix=@prefix@
+exec_prefix=@prefix@
+libdir=@prefix@/@libdir_name@
+includedir=@prefix@/include
+
+Name: libvolume_id
+Description: Library for reading metadata, label, uuid from various filesystems
+Version: @VERSION@
+Libs: -L${libdir} -lvolume_id
+Cflags: -I${includedir}
#include <fcntl.h>
#include <sys/ioctl.h>
-#include "../../udev.h"
+#include "../../udev/udev.h"
#include "lib/libvolume_id.h"
#define BLKGETSIZE64 _IOR(0x12,114,size_t)
--- /dev/null
+udevrulesdir = $(udev_prefix)/lib/udev/rules.d
+dist_udevrules_DATA = \
+ rules.d/50-udev-default.rules \
+ rules.d/60-persistent-storage.rules \
+ rules.d/60-persistent-storage-tape.rules \
+ rules.d/60-persistent-input.rules \
+ rules.d/60-persistent-v4l.rules \
+ rules.d/80-drivers.rules \
+ rules.d/95-udev-late.rules
+
+install-data-local:
+ -mkdir -p $(DESTDIR)$(sysconfdir)/udev/rules.d
+
+EXTRA_DIST = \
+ packages \
+ debian \
+ redhat \
+ suse \
+ gentoo \
+ slackware \
+ frugalware
+
+
+distclean-local:
+ rm -f Makefile.in
my $PWD = $ENV{PWD};
my $sysfs = "sys/";
-my $udev_bin = "../test-udev";
+my $udev_bin = "../udev/test-udev";
my $udev_root = "udev-root/";
my $udev_conf = "udev-test.conf";
my $udev_rules = "udev-test.rules";
--- /dev/null
+*.o
+*.a
+udevd
+udevadm
+test-udev
+.deps/
--- /dev/null
+sbin_PROGRAMS = \
+ udevd \
+ udevadm
+
+noinst_PROGRAMS = \
+ test-udev
+
+AM_CPPFLAGS = \
+ -DSYSCONFDIR=\""$(sysconfdir)"\" \
+ -DUDEV_PREFIX=\""$(udev_prefix)"\"
+
+udevd_SOURCES = \
+ list.h \
+ logging.h \
+ udev.h \
+ udev_rules.h \
+ udev_selinux.h \
+ udev_sysdeps.h \
+ udevd.h \
+ udevd.c \
+ udev_config.c \
+ udev_db.c \
+ udev_device.c \
+ udev_node.c \
+ udev_rules.c \
+ udev_rules_parse.c \
+ udev_sysdeps.c \
+ udev_sysfs.c \
+ udev_utils.c \
+ udev_utils_file.c \
+ udev_utils_string.c
+if USE_SELINUX
+udevd_SOURCES += \
+ udev_selinux.c
+
+udevd_LDADD = \
+ $(SELINUX_LIBS)
+endif
+
+udevadm_SOURCES = \
+ list.h \
+ logging.h \
+ udev.h \
+ udev_rules.h \
+ udev_selinux.h \
+ udev_sysdeps.h \
+ udevadm.c \
+ udevinfo.c \
+ udevcontrol.c \
+ udevtest.c \
+ udevmonitor.c \
+ udevsettle.c \
+ udevtrigger.c \
+ udev_config.c \
+ udev_db.c \
+ udev_device.c \
+ udev_node.c \
+ udev_rules.c \
+ udev_rules_parse.c \
+ udev_sysdeps.c \
+ udev_sysfs.c \
+ udev_utils.c \
+ udev_utils_file.c \
+ udev_utils_string.c
+if USE_SELINUX
+udevadm_SOURCES += \
+ udev_selinux.c
+
+udevadm_LDADD = \
+ $(SELINUX_LIBS)
+endif
+
+test_udev_SOURCES = \
+ list.h \
+ logging.h \
+ udev.h \
+ udev_rules.h \
+ udev_selinux.h \
+ udev_sysdeps.h \
+ test-udev.c \
+ udev_config.c \
+ udev_db.c \
+ udev_device.c \
+ udev_node.c \
+ udev_rules.c \
+ udev_rules_parse.c \
+ udev_sysdeps.c \
+ udev_sysfs.c \
+ udev_utils.c \
+ udev_utils_file.c \
+ udev_utils_string.c
+if USE_SELINUX
+test_udev_SOURCES += \
+ udev_selinux.c
+
+test_udev_LDADD = \
+ $(SELINUX_LIBS)
+endif
+
+dist_man_MANS = \
+ udev.7 \
+ udevadm.8 \
+ udevd.8
+
+EXTRA_DIST = \
+ udev.xml \
+ udevadm.xml \
+ udevd.xml
+
+%.7 %.8 : %.xml
+ $(XSLTPROC) -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
+
+distclean-local:
+ rm -f Makefile.in
+ rm -f $(dist_man_MANS)
#ifndef LOGGING_H
#define LOGGING_H
+#include "config.h"
+
#define err(format, arg...) do { } while (0)
#define info(format, arg...) do { } while (0)
#define dbg(format, arg...) do { } while (0)
*
*/
+#include "config.h"
+
#include <stdio.h>
#include <stddef.h>
#include <stdlib.h>
int retval = -EINVAL;
if (argc == 2 && strcmp(argv[1], "-V") == 0) {
- printf("%s\n", UDEV_VERSION);
+ printf("%s\n", VERSION);
exit(0);
}
err("open /dev/null failed: %s\n", strerror(errno));
udev_config_init();
selinux_init();
- dbg("version %s\n", UDEV_VERSION);
+ dbg("version %s\n", VERSION);
/* set signal handlers */
memset(&act, 0x00, sizeof(act));
#include "list.h"
#include "logging.h"
#include "udev_sysdeps.h"
-#include "udev_version.h"
#define COMMENT_CHARACTER '#'
#define LINE_SIZE 512
#define READ_END 0
#define WRITE_END 1
-#define UDEV_ROOT "/dev"
-#define DB_DIR ".udev/db"
-#define DB_NAME_INDEX_DIR ".udev/names"
-#define RULES_LIB_DIR "/lib/udev/rules.d"
-#define RULES_DYN_DIR ".udev/rules.d"
-#define RULES_ETC_DIR "/etc/udev/rules.d"
-
struct udev_rules;
struct sysfs_device {
{
const char *env;
- strcpy(udev_config_filename, UDEV_CONFIG_FILE);
- strcpy(udev_root, UDEV_ROOT);
+ strcpy(udev_config_filename, SYSCONFDIR "/udev/udev.conf");
+ strcpy(udev_root, UDEV_PREFIX "/dev");
udev_rules_dir[0] = '\0';
udev_log_priority = LOG_ERR;
udev_run = 1;
/* translate to location of db file */
strlcpy(filename, udev_root, len);
- start = strlcat(filename, "/"DB_DIR"/", len);
+ start = strlcat(filename, "/.udev/db/", len);
strlcat(filename, devpath, len);
return path_encode(&filename[start], len - start);
}
/* directory with device name */
strlcpy(filename, udev_root, sizeof(filename));
- start = strlcat(filename, "/"DB_NAME_INDEX_DIR"/", sizeof(filename));
+ start = strlcat(filename, "/.udev/names/", sizeof(filename));
strlcat(filename, name, sizeof(filename));
path_encode(&filename[start], sizeof(filename) - start);
/* entry with the devpath */
int rc = 0;
strlcpy(dirname, udev_root, sizeof(dirname));
- start = strlcat(dirname, "/"DB_NAME_INDEX_DIR"/", sizeof(dirname));
+ start = strlcat(dirname, "/.udev/names/", sizeof(dirname));
strlcat(dirname, name, sizeof(dirname));
path_encode(&dirname[start], sizeof(dirname) - start);
DIR *dir;
strlcpy(dbpath, udev_root, sizeof(dbpath));
- strlcat(dbpath, "/"DB_DIR, sizeof(dbpath));
+ strlcat(dbpath, "/.udev/db", sizeof(dbpath));
dir = opendir(dbpath);
if (dir == NULL) {
info("no udev_db available '%s': %s\n", dbpath, strerror(errno));
#include <fcntl.h>
#include <errno.h>
#include <ctype.h>
+#include <string.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#include <net/if.h>
/* allow programs in /lib/udev called without the path */
if (strchr(argv[0], '/') == NULL) {
- strlcpy(program, "/lib/udev/", sizeof(program));
+ strlcpy(program, UDEV_PREFIX "/lib/udev/", sizeof(program));
strlcat(program, argv[0], sizeof(program));
argv[0] = program;
}
#include "list.h"
#define PAIRS_MAX 5
-#define RULESFILE_SUFFIX ".rules"
enum key_operation {
KEY_OP_UNSET,
/* allow programs in /lib/udev called without the path */
if (strchr(file, '/') == NULL) {
- strlcpy(file, "/lib/udev/", sizeof(file));
+ strlcpy(file, UDEV_PREFIX "/lib/udev/", sizeof(file));
strlcat(file, value, sizeof(file));
pos = strchr(file, ' ');
if (pos)
if (udev_rules_dir[0] != '\0') {
/* custom rules location for testing */
- add_matching_files(&name_list, udev_rules_dir, RULESFILE_SUFFIX);
+ add_matching_files(&name_list, udev_rules_dir, ".rules");
} else {
/* read default rules */
- add_matching_files(&name_list, RULES_LIB_DIR, RULESFILE_SUFFIX);
+ add_matching_files(&name_list, UDEV_PREFIX "/lib/udev/rules.d", ".rules");
/* read user/custom rules */
- add_matching_files(&sort_list, RULES_ETC_DIR, RULESFILE_SUFFIX);
+ add_matching_files(&sort_list, SYSCONFDIR "/udev/rules.d", ".rules");
/* read dynamic/temporary rules */
strlcpy(filename, udev_root, sizeof(filename));
- strlcat(filename, "/"RULES_DYN_DIR, sizeof(filename));
+ strlcat(filename, "/.udev/rules.d", sizeof(filename));
if (stat(filename, &statbuf) != 0) {
create_path(filename);
selinux_setfscreatecon(filename, NULL, S_IFDIR|0755);
mkdir(filename, 0755);
selinux_resetfscreatecon();
}
- add_matching_files(&sort_list, filename, RULESFILE_SUFFIX);
+ add_matching_files(&sort_list, filename, ".rules");
/* sort all rules files by basename into list of files */
list_for_each_entry_safe(sort_loop, sort_tmp, &sort_list, node) {
*
*/
+#include "config.h"
+
#include <stdlib.h>
#include <stdio.h>
#include <stddef.h>
#define _UDEV_SELINUX_H
#ifdef USE_SELINUX
-
extern void selinux_setfilecon(const char *file, const char *devname, unsigned int mode);
extern void selinux_setfscreatecon(const char *file, const char *devname, unsigned int mode);
extern void selinux_resetfscreatecon(void);
extern void selinux_init(void);
extern void selinux_exit(void);
-
#else
-
static inline void selinux_setfilecon(const char *file, const char *devname, unsigned int mode) {}
static inline void selinux_setfscreatecon(const char *file, const char *devname, unsigned int mode) {}
static inline void selinux_resetfscreatecon(void) {}
static inline void selinux_init(void) {}
static inline void selinux_exit(void) {}
+#endif
-#endif /* USE_SELINUX */
-#endif /* _UDEV_USE_SELINUX */
+#endif
/*
- * Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
- * Copyright (C) 2005-2006 Kay Sievers <kay.sievers@vrfy.org>
+ * Copyright (C) 2005-2008 Kay Sievers <kay.sievers@vrfy.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
-#include <ctype.h>
-#include <fcntl.h>
-#include <errno.h>
#include <sys/types.h>
-#include "udev.h"
-
-#ifdef __GLIBC__
+#ifndef HAVE_STRLCPY
size_t strlcpy(char *dst, const char *src, size_t size)
{
size_t bytes = 0;
*q = '\0';
return bytes;
}
-#endif /* __GLIBC__ */
+#endif /* HAVE_STRLCPY */
/*
* wrapping of libc features and kernel interfaces
*
- * Copyright (C) 2005-2006 Kay Sievers <kay.sievers@vrfy.org>
+ * Copyright (C) 2005-2008 Kay Sievers <kay.sievers@vrfy.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
#ifndef _UDEV_SYSDEPS_H_
#define _UDEV_SYSDEPS_H_
-#include <string.h>
-#include <unistd.h>
#include <stdint.h>
-/* needed until Inotify! syscalls reach glibc */
-#include <sys/syscall.h>
-#ifndef __NR_inotify_init
-#if defined(__i386__)
-# define __NR_inotify_init 291
-# define __NR_inotify_add_watch 292
-# define __NR_inotify_rm_watch 293
-#elif defined(__x86_64__)
-# define __NR_inotify_init 253
-# define __NR_inotify_add_watch 254
-# define __NR_inotify_rm_watch 255
-#elif defined(__powerpc__) || defined(__powerpc64__)
-# define __NR_inotify_init 275
-# define __NR_inotify_add_watch 276
-# define __NR_inotify_rm_watch 277
-#elif defined (__ia64__)
-# define __NR_inotify_init 1277
-# define __NR_inotify_add_watch 1278
-# define __NR_inotify_rm_watch 1279
-#elif defined (__s390__)
-# define __NR_inotify_init 284
-# define __NR_inotify_add_watch 285
-# define __NR_inotify_rm_watch 286
-#elif defined (__alpha__)
-# define __NR_inotify_init 444
-# define __NR_inotify_add_watch 445
-# define __NR_inotify_rm_watch 446
-#elif defined (__sparc__) || defined (__sparc64__)
-# define __NR_inotify_init 151
-# define __NR_inotify_add_watch 152
-# define __NR_inotify_rm_watch 156
-#elif defined (__arm__)
-# define __NR_inotify_init __NR_SYSCALL_BASE+316
-# define __NR_inotify_add_watch __NR_SYSCALL_BASE+317
-# define __NR_inotify_rm_watch __NR_SYSCALL_BASE+318
-#elif defined (__sh__)
-# define __NR_inotify_init 290
-# define __NR_inotify_add_watch 291
-# define __NR_inotify_rm_watch 292
-#elif defined (__m32r__)
-# define __NR_inotify_init 290
-# define __NR_inotify_add_watch 291
-# define __NR_inotify_rm_watch 292
-#elif defined (__hppa__)
-# define __NR_inotify_init 269
-# define __NR_inotify_add_watch 270
-# define __NR_inotify_rm_watch 271
-#elif defined (__mips__)
-# include <sgidefs.h>
-# if _MIPS_SIM == _MIPS_SIM_ABI32
-# define __NR_Linux 4000
-# define __NR_inotify_init (__NR_Linux + 284)
-# define __NR_inotify_add_watch (__NR_Linux + 285)
-# define __NR_inotify_rm_watch (__NR_Linux + 286)
-# elif _MIPS_SIM == _MIPS_SIM_ABI64
-# define __NR_Linux 5000
-# define __NR_inotify_init (__NR_Linux + 243)
-# define __NR_inotify_add_watch (__NR_Linux + 244)
-# define __NR_inotify_rm_watch (__NR_Linux + 245)
-# elif _MIPS_SIM == _MIPS_SIM_NABI32
-# define __NR_Linux 6000
-# define __NR_inotify_init (__NR_Linux + 247)
-# define __NR_inotify_add_watch (__NR_Linux + 248)
-# define __NR_inotify_rm_watch (__NR_Linux + 249)
-# endif
+/* needed for our signal handlers to work */
+#undef asmlinkage
+#ifdef __i386__
+#define asmlinkage __attribute__((regparm(0)))
#else
-#warning "inotify unsupported on this architecture!"
-#endif
-#endif /* __NR_inotify_init */
+#define asmlinkage
+#endif /* __i386__ */
-/* dummy if we don't have the syscalls defined */
-#ifndef __NR_inotify_init
+#ifndef HAVE_INOTIFY
static inline int inotify_init(void)
{
return -1;
{
return -1;
}
-#else
-/* needed until /usr/include/sys/inotify.h is working */
-#ifndef __GLIBC__
-#include <sys/inotify.h>
-#else
-static inline int inotify_init(void)
-{
- return syscall(__NR_inotify_init);
-}
-
-static inline int inotify_add_watch(int fd, const char *name, uint32_t mask)
-{
- return syscall(__NR_inotify_add_watch, fd, name, mask);
-}
-#endif /* __GLIBC__ */
-#endif /* __NR_inotify_init */
-
-#ifndef IN_CREATE
-#define IN_CREATE 0x00000100 /* Subfile was created */
-#define IN_MOVED_FROM 0x00000040 /* File was moved from X */
-#define IN_MOVED_TO 0x00000080 /* File was moved to Y */
-#define IN_DELETE 0x00000200 /* Subfile was deleted */
-#define IN_CLOSE_WRITE 0x00000008 /* Writtable file was closed */
-#define IN_MOVE (IN_MOVED_FROM | IN_MOVED_TO) /* moves */
-#endif /* IN_CREATE */
-
-/* needed for our signal handlers to work */
-#undef asmlinkage
-#ifdef __i386__
-#define asmlinkage __attribute__((regparm(0)))
-#else
-#define asmlinkage
-#endif /* __i386__ */
-
-/* headers are broken on some architectures */
-#ifndef __FD_SET
-#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-#endif
-#ifndef __FD_CLR
-#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-#endif
-#ifndef __FD_ISSET
-#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
-#endif
-#ifndef __FD_ZERO
-#define __FD_ZERO(set) ((void) memset ((void*) (set), 0, sizeof (fd_set)))
-#endif
-
-#ifndef NETLINK_KOBJECT_UEVENT
-#define NETLINK_KOBJECT_UEVENT 15
-#endif
-
-#ifndef SO_RCVBUFFORCE
-#if defined(__alpha__) || defined(__hppa__) || defined(__sparc__) || defined(__sparc_v9__)
-#define SO_RCVBUFFORCE 0x100b
-#else
-#define SO_RCVBUFFORCE 33
-#endif
#endif
+#ifndef HAVE_STRLCPY
extern size_t strlcpy(char *dst, const char *src, size_t size);
extern size_t strlcat(char *dst, const char *src, size_t size);
+#endif
#endif
#include <stdio.h>
#include <stddef.h>
#include <unistd.h>
+#include <string.h>
#include <fcntl.h>
#include <ctype.h>
#include <errno.h>
#include <stdio.h>
#include <stddef.h>
#include <unistd.h>
+#include <string.h>
#include <fcntl.h>
#include <errno.h>
#include <ctype.h>
#include <stdio.h>
#include <stddef.h>
#include <unistd.h>
+#include <string.h>
#include <fcntl.h>
#include <errno.h>
#include <ctype.h>
#include <stdio.h>
#include <stddef.h>
#include <unistd.h>
+#include <string.h>
#include <fcntl.h>
#include <errno.h>
#include <ctype.h>
*
*/
+#include "config.h"
+
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
return;
va_start(args, format);
- if (debug) {
+ if (debug)
vprintf(format, args);
- } else
+ else
vsyslog(priority, format, args);
va_end(args);
}
static int version(int argc, char *argv[], char *envp[])
{
- printf("%s\n", UDEV_VERSION);
+ printf("%s\n", VERSION);
return 0;
}
*
*/
+#include "config.h"
+
#include <time.h>
#include <errno.h>
#include <stdio.h>
udev_log = log_priority(env);
logging_init("udevcontrol");
- dbg("version %s\n", UDEV_VERSION);
+ dbg("version %s\n", VERSION);
if (argc < 2) {
fprintf(stderr, "missing command\n\n");
*
*/
+#include "config.h"
+
#include <stddef.h>
#include <signal.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <linux/types.h>
#include <linux/netlink.h>
+#ifdef HAVE_INOTIFY
+#include <sys/inotify.h>
+#endif
#include "udev.h"
#include "udev_rules.h"
size_t start;
/* location of queue file */
- snprintf(filename, sizeof(filename), "%s/"EVENT_QUEUE_DIR"/%llu", udev_root, msg->seqnum);
+ snprintf(filename, sizeof(filename), "%s/.udev/queue/%llu", udev_root, msg->seqnum);
/* location of failed file */
strlcpy(filename_failed, udev_root, sizeof(filename_failed));
strlcat(filename_failed, "/", sizeof(filename_failed));
- start = strlcat(filename_failed, EVENT_FAILED_DIR"/", sizeof(filename_failed));
+ start = strlcat(filename_failed, ".udev/failed/", sizeof(filename_failed));
strlcat(filename_failed, msg->devpath, sizeof(filename_failed));
path_encode(&filename_failed[start], sizeof(filename_failed) - start);
strlcpy(filename_failed_old, udev_root, sizeof(filename_failed_old));
strlcat(filename_failed_old, "/", sizeof(filename_failed_old));
- start = strlcat(filename_failed_old, EVENT_FAILED_DIR"/", sizeof(filename_failed_old));
+ start = strlcat(filename_failed_old, ".udev/failed/", sizeof(filename_failed_old));
strlcat(filename_failed_old, msg->devpath_old, sizeof(filename_failed_old));
path_encode(&filename_failed_old[start], sizeof(filename) - start);
info("seq %llu queued, '%s' '%s'\n", msg->seqnum, msg->action, msg->subsystem);
strlcpy(filename, udev_root, sizeof(filename));
- strlcat(filename, "/" EVENT_SEQNUM, sizeof(filename));
+ strlcat(filename, "/.udev/uevent_seqnum", sizeof(filename));
fd = open(filename, O_WRONLY|O_TRUNC|O_CREAT, 0644);
if (fd >= 0) {
char str[32];
len = 3;
}
strlcpy(filename, udev_root, sizeof(filename));
- strlcat(filename, "/" EVENT_SEQNUM, sizeof(filename));
+ strlcat(filename, "/.udev/uevent_seqnum", sizeof(filename));
create_path(filename);
fd = open(filename, O_WRONLY|O_TRUNC|O_CREAT, 0644);
if (fd >= 0) {
logging_init("udevd");
udev_config_init();
selinux_init();
- dbg("version %s\n", UDEV_VERSION);
+ dbg("version %s\n", VERSION);
while (1) {
option = getopt_long(argc, argv, "dDthV", options, NULL);
printf("Usage: udevd [--help] [--daemon] [--debug-trace] [--debug] [--version]\n");
goto exit;
case 'V':
- printf("%s\n", UDEV_VERSION);
+ printf("%s\n", VERSION);
goto exit;
default:
goto exit;
fd = open("/dev/kmsg", O_WRONLY);
if (fd > 0) {
- const char *str = "<6>udevd version " UDEV_VERSION " started\n";
+ const char *str = "<6>udevd version " VERSION " started\n";
write(fd, str, strlen(str));
close(fd);
} else {
char filename[PATH_MAX];
- inotify_add_watch(inotify_fd, RULES_LIB_DIR,
+ inotify_add_watch(inotify_fd, UDEV_PREFIX "/lib/udev/rules.d",
IN_CREATE | IN_DELETE | IN_MOVE | IN_CLOSE_WRITE);
- inotify_add_watch(inotify_fd, RULES_ETC_DIR,
+ inotify_add_watch(inotify_fd, SYSCONFDIR "/udev/rules.d",
IN_CREATE | IN_DELETE | IN_MOVE | IN_CLOSE_WRITE);
/* watch dynamic rules directory */
strlcpy(filename, udev_root, sizeof(filename));
- strlcat(filename, "/"RULES_DYN_DIR, sizeof(filename));
+ strlcat(filename, "/.udev/rules.d", sizeof(filename));
inotify_add_watch(inotify_fd, filename,
IN_CREATE | IN_DELETE | IN_MOVE | IN_CLOSE_WRITE);
}
#define UDEVD_PRIORITY -4
#define UDEV_PRIORITY -2
-#define EVENT_QUEUE_DIR ".udev/queue"
-#define EVENT_FAILED_DIR ".udev/failed"
-#define EVENT_SEQNUM ".udev/uevent_seqnum"
-
/* maximum limit of forked childs */
#define UDEVD_MAX_CHILDS 256
/* start to throttle forking if maximum number of running childs in our session is reached */
#define UEVENT_BUFFER_SIZE 2048
#define UEVENT_NUM_ENVP 32
-#define UDEVD_CTRL_SOCK_PATH "/org/kernel/udev/udevd"
-#define UDEVD_CTRL_MAGIC "udevd_" UDEV_VERSION
+#define UDEVD_CTRL_SOCK_PATH UDEV_PREFIX "/org/kernel/udev/udevd"
+#define UDEVD_CTRL_MAGIC "udevd_" VERSION
enum udevd_ctrl_msg_type {
UDEVD_CTRL_UNKNOWN,
*
*/
+#include "config.h"
+
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
export_prefix = optarg;
break;
case 1:
- printf("%s\n", UDEV_VERSION);
+ printf("%s\n", VERSION);
goto exit;
case 'V':
- printf("udevinfo, version %s\n", UDEV_VERSION);
+ printf("udevinfo, version %s\n", VERSION);
goto exit;
case 'h':
printf("Usage: udevadm info OPTIONS\n"
logging_init("udevsettle");
udev_config_init();
- dbg("version %s\n", UDEV_VERSION);
+ dbg("version %s\n", VERSION);
sysfs_init();
while (1) {
}
strlcpy(queuename, udev_root, sizeof(queuename));
- strlcat(queuename, "/" EVENT_QUEUE_DIR, sizeof(queuename));
+ strlcat(queuename, "/.udev/queue", sizeof(queuename));
loop = timeout * LOOP_PER_SECOND;
while (loop--) {
/* read current udev seqnum */
strlcpy(filename, udev_root, sizeof(filename));
- strlcat(filename, "/" EVENT_SEQNUM, sizeof(filename));
+ strlcat(filename, "/.udev/uevent_seqnum", sizeof(filename));
fd = open(filename, O_RDONLY);
if (fd < 0)
goto exit;
{}
};
- info("version %s\n", UDEV_VERSION);
+ info("version %s\n", VERSION);
udev_config_init();
if (udev_log_priority < LOG_INFO) {
char priority[32];
struct dirent *dent;
strlcpy(base, udev_root, sizeof(base));
- strlcat(base, "/" EVENT_FAILED_DIR, sizeof(base));
+ strlcat(base, "/.udev/failed", sizeof(base));
dir = opendir(base);
if (dir != NULL) {
logging_init("udevtrigger");
udev_config_init();
- dbg("version %s\n", UDEV_VERSION);
+ dbg("version %s\n", VERSION);
sysfs_init();
while (1) {
projects / systemd / commitdiff