* Fix in4 reads for W83627THF and W83637HF chips.
* Use the correct register for alarm flags.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
#define W83781D_REG_BANK 0x4E
#define W83781D_REG_CONFIG 0x40
#define W83781D_REG_BANK 0x4E
#define W83781D_REG_CONFIG 0x40
-#define W83781D_REG_ALARM1 0x41
-#define W83781D_REG_ALARM2 0x42
-#define W83781D_REG_ALARM3 0x450
+#define W83781D_REG_ALARM1 0x459
+#define W83781D_REG_ALARM2 0x45A
+#define W83781D_REG_ALARM3 0x45B
-#define W83781D_REG_IRQ 0x4C
#define W83781D_REG_BEEP_CONFIG 0x4D
#define W83781D_REG_BEEP_INTS1 0x56
#define W83781D_REG_BEEP_INTS2 0x57
#define W83781D_REG_BEEP_CONFIG 0x4D
#define W83781D_REG_BEEP_INTS1 0x56
#define W83781D_REG_BEEP_INTS2 0x57
W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
}
}
W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
}
}
-
- /* enable comparator mode for temp2 and temp3 so
- alarm indication will work correctly */
- i = w83627hf_read_value(client, W83781D_REG_IRQ);
- if (!(i & 0x40))
- w83627hf_write_value(client, W83781D_REG_IRQ,
- i | 0x40);
/* skip missing sensors */
if (((data->type == w83697hf) && (i == 1)) ||
((data->type == w83627thf || data->type == w83637hf)
/* skip missing sensors */
if (((data->type == w83697hf) && (i == 1)) ||
((data->type == w83627thf || data->type == w83637hf)
- && (i == 4 || i == 5)))
+ && (i == 5 || i == 6)))
continue;
data->in[i] =
w83627hf_read_value(client, W83781D_REG_IN(i));
continue;
data->in[i] =
w83627hf_read_value(client, W83781D_REG_IN(i));