]> err.no Git - linux-2.6/commitdiff
ibmvscsi: driver enablement for CMO
authorRobert Jennings <rcj@linux.vnet.ibm.com>
Wed, 23 Jul 2008 18:35:27 +0000 (04:35 +1000)
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>
Fri, 25 Jul 2008 05:44:44 +0000 (15:44 +1000)
Enable the driver to function in a Cooperative Memory Overcommitment (CMO)
environment.

The following changes are made to enable the driver for CMO:
 * DMA mapping errors will not result in error messages if entitlement has
   been exceeded and resources were not available.
 * The driver has a get_desired_dma function defined to function
   in a CMO environment. It will indicate how much IO memory it would like
   to function.

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
drivers/scsi/ibmvscsi/ibmvscsi.c
drivers/scsi/ibmvscsi/ibmvscsi.h

index 5d23368a1bcee68e31bc04019cd696118132bea0..20000ec79b043a9a17fcfc54b45e58cce556f064 100644 (file)
@@ -72,6 +72,7 @@
 #include <linux/delay.h>
 #include <asm/firmware.h>
 #include <asm/vio.h>
+#include <asm/firmware.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_host.h>
@@ -426,8 +427,10 @@ static int map_sg_data(struct scsi_cmnd *cmd,
                                           SG_ALL * sizeof(struct srp_direct_buf),
                                           &evt_struct->ext_list_token, 0);
                if (!evt_struct->ext_list) {
-                       sdev_printk(KERN_ERR, cmd->device,
-                                   "Can't allocate memory for indirect table\n");
+                       if (!firmware_has_feature(FW_FEATURE_CMO))
+                               sdev_printk(KERN_ERR, cmd->device,
+                                           "Can't allocate memory "
+                                           "for indirect table\n");
                        return 0;
                }
        }
@@ -743,7 +746,9 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
        srp_cmd->lun = ((u64) lun) << 48;
 
        if (!map_data_for_srp_cmd(cmnd, evt_struct, srp_cmd, hostdata->dev)) {
-               sdev_printk(KERN_ERR, cmnd->device, "couldn't convert cmd to srp_cmd\n");
+               if (!firmware_has_feature(FW_FEATURE_CMO))
+                       sdev_printk(KERN_ERR, cmnd->device,
+                                   "couldn't convert cmd to srp_cmd\n");
                free_event_struct(&hostdata->pool, evt_struct);
                return SCSI_MLQUEUE_HOST_BUSY;
        }
@@ -855,7 +860,10 @@ static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
                                            DMA_BIDIRECTIONAL);
 
        if (dma_mapping_error(req->buffer)) {
-               dev_err(hostdata->dev, "Unable to map request_buffer for adapter_info!\n");
+               if (!firmware_has_feature(FW_FEATURE_CMO))
+                       dev_err(hostdata->dev,
+                               "Unable to map request_buffer for "
+                               "adapter_info!\n");
                free_event_struct(&hostdata->pool, evt_struct);
                return;
        }
@@ -1400,7 +1408,9 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
                                                    DMA_BIDIRECTIONAL);
 
        if (dma_mapping_error(host_config->buffer)) {
-               dev_err(hostdata->dev, "dma_mapping error getting host config\n");
+               if (!firmware_has_feature(FW_FEATURE_CMO))
+                       dev_err(hostdata->dev,
+                               "dma_mapping error getting host config\n");
                free_event_struct(&hostdata->pool, evt_struct);
                return -1;
        }
@@ -1604,7 +1614,7 @@ static struct scsi_host_template driver_template = {
        .eh_host_reset_handler = ibmvscsi_eh_host_reset_handler,
        .slave_configure = ibmvscsi_slave_configure,
        .change_queue_depth = ibmvscsi_change_queue_depth,
-       .cmd_per_lun = 16,
+       .cmd_per_lun = IBMVSCSI_CMDS_PER_LUN_DEFAULT,
        .can_queue = IBMVSCSI_MAX_REQUESTS_DEFAULT,
        .this_id = -1,
        .sg_tablesize = SG_ALL,
@@ -1612,6 +1622,26 @@ static struct scsi_host_template driver_template = {
        .shost_attrs = ibmvscsi_attrs,
 };
 
+/**
+ * ibmvscsi_get_desired_dma - Calculate IO memory desired by the driver
+ *
+ * @vdev: struct vio_dev for the device whose desired IO mem is to be returned
+ *
+ * Return value:
+ *     Number of bytes of IO data the driver will need to perform well.
+ */
+static unsigned long ibmvscsi_get_desired_dma(struct vio_dev *vdev)
+{
+       /* iu_storage data allocated in initialize_event_pool */
+       unsigned long desired_io = max_requests * sizeof(union viosrp_iu);
+
+       /* add io space for sg data */
+       desired_io += (IBMVSCSI_MAX_SECTORS_DEFAULT *
+                            IBMVSCSI_CMDS_PER_LUN_DEFAULT);
+
+       return desired_io;
+}
+
 /**
  * Called by bus code for each adapter
  */
@@ -1641,7 +1671,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
        hostdata->host = host;
        hostdata->dev = dev;
        atomic_set(&hostdata->request_limit, -1);
-       hostdata->host->max_sectors = 32 * 8; /* default max I/O 32 pages */
+       hostdata->host->max_sectors = IBMVSCSI_MAX_SECTORS_DEFAULT;
 
        rc = ibmvscsi_ops->init_crq_queue(&hostdata->queue, hostdata, max_requests);
        if (rc != 0 && rc != H_RESOURCE) {
@@ -1735,6 +1765,7 @@ static struct vio_driver ibmvscsi_driver = {
        .id_table = ibmvscsi_device_table,
        .probe = ibmvscsi_probe,
        .remove = ibmvscsi_remove,
+       .get_desired_dma = ibmvscsi_get_desired_dma,
        .driver = {
                .name = "ibmvscsi",
                .owner = THIS_MODULE,
index 46e850e302c7918306d96218ff606229ae230183..2d4339d5e16e4e3c9cfed8b7b4fe30b87cb84932 100644 (file)
@@ -45,6 +45,8 @@ struct Scsi_Host;
 #define MAX_INDIRECT_BUFS 10
 
 #define IBMVSCSI_MAX_REQUESTS_DEFAULT 100
+#define IBMVSCSI_CMDS_PER_LUN_DEFAULT 16
+#define IBMVSCSI_MAX_SECTORS_DEFAULT 256 /* 32 * 8 = default max I/O 32 pages */
 #define IBMVSCSI_MAX_CMDS_PER_LUN 64
 
 /* ------------------------------------------------------------