X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=kernel%2Ftime%2Fntp.c;h=e64efaf957e8485b4d233412a69fdf45a1225691;hb=2a1292b36ba106b9b7f030d3fa130f5f634fd8f0;hp=438c6b723ee202bd3a22607f2ebf7d4b031d1f6b;hpb=e245befce7af0a1e1347079ed62695b059594bd4;p=linux-2.6

diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 438c6b723e..e64efaf957 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -10,6 +10,7 @@
 
 #include <linux/mm.h>
 #include <linux/time.h>
+#include <linux/timer.h>
 #include <linux/timex.h>
 #include <linux/jiffies.h>
 #include <linux/hrtimer.h>
@@ -116,11 +117,6 @@ void second_overflow(void)
 		if (xtime.tv_sec % 86400 == 0) {
 			xtime.tv_sec--;
 			wall_to_monotonic.tv_sec++;
-			/*
-			 * The timer interpolator will make time change
-			 * gradually instead of an immediate jump by one second
-			 */
-			time_interpolator_update(-NSEC_PER_SEC);
 			time_state = TIME_OOP;
 			printk(KERN_NOTICE "Clock: inserting leap second "
 					"23:59:60 UTC\n");
@@ -130,11 +126,6 @@ void second_overflow(void)
 		if ((xtime.tv_sec + 1) % 86400 == 0) {
 			xtime.tv_sec++;
 			wall_to_monotonic.tv_sec--;
-			/*
-			 * Use of time interpolator for a gradual change of
-			 * time
-			 */
-			time_interpolator_update(NSEC_PER_SEC);
 			time_state = TIME_WAIT;
 			printk(KERN_NOTICE "Clock: deleting leap second "
 					"23:59:59 UTC\n");
@@ -185,12 +176,64 @@ u64 current_tick_length(void)
 	return tick_length;
 }
 
+#ifdef CONFIG_GENERIC_CMOS_UPDATE
 
-void __attribute__ ((weak)) notify_arch_cmos_timer(void)
+/* Disable the cmos update - used by virtualization and embedded */
+int no_sync_cmos_clock  __read_mostly;
+
+static void sync_cmos_clock(unsigned long dummy);
+
+static DEFINE_TIMER(sync_cmos_timer, sync_cmos_clock, 0, 0);
+
+static void sync_cmos_clock(unsigned long dummy)
 {
-	return;
+	struct timespec now, next;
+	int fail = 1;
+
+	/*
+	 * If we have an externally synchronized Linux clock, then update
+	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+	 * called as close as possible to 500 ms before the new second starts.
+	 * This code is run on a timer.  If the clock is set, that timer
+	 * may not expire at the correct time.  Thus, we adjust...
+	 */
+	if (!ntp_synced())
+		/*
+		 * Not synced, exit, do not restart a timer (if one is
+		 * running, let it run out).
+		 */
+		return;
+
+	getnstimeofday(&now);
+	if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2)
+		fail = update_persistent_clock(now);
+
+	next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec;
+	if (next.tv_nsec <= 0)
+		next.tv_nsec += NSEC_PER_SEC;
+
+	if (!fail)
+		next.tv_sec = 659;
+	else
+		next.tv_sec = 0;
+
+	if (next.tv_nsec >= NSEC_PER_SEC) {
+		next.tv_sec++;
+		next.tv_nsec -= NSEC_PER_SEC;
+	}
+	mod_timer(&sync_cmos_timer, jiffies + timespec_to_jiffies(&next));
+}
+
+static void notify_cmos_timer(void)
+{
+	if (!no_sync_cmos_clock)
+		mod_timer(&sync_cmos_timer, jiffies + 1);
 }
 
+#else
+static inline void notify_cmos_timer(void) { }
+#endif
+
 /* adjtimex mainly allows reading (and writing, if superuser) of
  * kernel time-keeping variables. used by xntpd.
  */
@@ -206,10 +249,12 @@ int do_adjtimex(struct timex *txc)
 
 	/* Now we validate the data before disabling interrupts */
 
-	if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
+	if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT) {
 	  /* singleshot must not be used with any other mode bits */
-		if (txc->modes != ADJ_OFFSET_SINGLESHOT)
+		if (txc->modes != ADJ_OFFSET_SINGLESHOT &&
+					txc->modes != ADJ_OFFSET_SS_READ)
 			return -EINVAL;
+	}
 
 	if (txc->modes != ADJ_OFFSET_SINGLESHOT && (txc->modes & ADJ_OFFSET))
 	  /* adjustment Offset limited to +- .512 seconds */
@@ -329,7 +374,8 @@ int do_adjtimex(struct timex *txc)
 leave:	if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0)
 		result = TIME_ERROR;
 
-	if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
+	if ((txc->modes == ADJ_OFFSET_SINGLESHOT) ||
+			(txc->modes == ADJ_OFFSET_SS_READ))
 		txc->offset = save_adjust;
 	else
 		txc->offset = ((long)shift_right(time_offset, SHIFT_UPDATE)) *
@@ -355,6 +401,6 @@ leave:	if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0)
 	txc->stbcnt	   = 0;
 	write_sequnlock_irq(&xtime_lock);
 	do_gettimeofday(&txc->time);
-	notify_arch_cmos_timer();
+	notify_cmos_timer();
 	return(result);
 }