X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=include%2Fnet%2Fmac80211.h;h=4dd3d93e196025d162217a0d6107a28733ac7af9;hb=eb6a12c2428d21a9f3e0f1a50e927d5fd80fc3d0;hp=656442c6b1c3669ee50e3d32ea21f86248f4f475;hpb=6ef307bc561911c8cdda98ef3896b5982b602a43;p=linux-2.6 diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 656442c6b1..4dd3d93e19 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -115,17 +115,17 @@ enum ieee80211_max_queues { * The information provided in this structure is required for QoS * transmit queue configuration. Cf. IEEE 802.11 7.3.2.29. * - * @aifs: arbitration interface space [0..255, -1: use default] - * @cw_min: minimum contention window [will be a value of the form - * 2^n-1 in the range 1..1023; 0: use default] + * @aifs: arbitration interface space [0..255] + * @cw_min: minimum contention window [a value of the form + * 2^n-1 in the range 1..32767] * @cw_max: maximum contention window [like @cw_min] * @txop: maximum burst time in units of 32 usecs, 0 meaning disabled */ struct ieee80211_tx_queue_params { - s16 aifs; + u16 txop; u16 cw_min; u16 cw_max; - u16 txop; + u8 aifs; }; /** @@ -239,6 +239,17 @@ struct ieee80211_bss_conf { * is for the whole aggregation. * @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned, * so consider using block ack request (BAR). + * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence + * number to this frame, taking care of not overwriting the fragment + * number and increasing the sequence number only when the + * IEEE80211_TX_CTL_FIRST_FRAGMENT flags is set. mac80211 will properly + * assign sequence numbers to QoS-data frames but cannot do so correctly + * for non-QoS-data and management frames because beacons need them from + * that counter as well and mac80211 cannot guarantee proper sequencing. + * If this flag is set, the driver should instruct the hardware to + * assign a sequence number to the frame or assign one itself. Cf. IEEE + * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for + * beacons always be clear for frames without a sequence number field. */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), @@ -265,6 +276,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_STAT_ACK = BIT(21), IEEE80211_TX_STAT_AMPDU = BIT(22), IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(23), + IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(24), }; @@ -407,11 +419,13 @@ struct ieee80211_rx_status { * @IEEE80211_CONF_SHORT_SLOT_TIME: use 802.11g short slot time * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported) * @IEEE80211_CONF_SUPPORT_HT_MODE: use 802.11n HT capabilities (if supported) + * @IEEE80211_CONF_PS: Enable 802.11 power save mode */ enum ieee80211_conf_flags { IEEE80211_CONF_SHORT_SLOT_TIME = (1<<0), IEEE80211_CONF_RADIOTAP = (1<<1), IEEE80211_CONF_SUPPORT_HT_MODE = (1<<2), + IEEE80211_CONF_PS = (1<<3), }; /** @@ -526,34 +540,39 @@ struct ieee80211_if_init_conf { void *mac_addr; }; +/** + * enum ieee80211_if_conf_change - interface config change flags + * + * @IEEE80211_IFCC_BSSID: The BSSID changed. + * @IEEE80211_IFCC_SSID: The SSID changed. + * @IEEE80211_IFCC_BEACON: The beacon for this interface changed + * (currently AP and MESH only), use ieee80211_beacon_get(). + */ +enum ieee80211_if_conf_change { + IEEE80211_IFCC_BSSID = BIT(0), + IEEE80211_IFCC_SSID = BIT(1), + IEEE80211_IFCC_BEACON = BIT(2), +}; + /** * struct ieee80211_if_conf - configuration of an interface * - * @type: type of the interface. This is always the same as was specified in - * &struct ieee80211_if_init_conf. The type of an interface never changes - * during the life of the interface; this field is present only for - * convenience. + * @changed: parameters that have changed, see &enum ieee80211_if_conf_change. * @bssid: BSSID of the network we are associated to/creating. * @ssid: used (together with @ssid_len) by drivers for hardware that * generate beacons independently. The pointer is valid only during the * config_interface() call, so copy the value somewhere if you need * it. * @ssid_len: length of the @ssid field. - * @beacon: beacon template. Valid only if @host_gen_beacon_template in - * &struct ieee80211_hw is set. The driver is responsible of freeing - * the sk_buff. - * @beacon_control: tx_control for the beacon template, this field is only - * valid when the @beacon field was set. * * This structure is passed to the config_interface() callback of * &struct ieee80211_hw. */ struct ieee80211_if_conf { - int type; + u32 changed; u8 *bssid; u8 *ssid; size_t ssid_len; - struct sk_buff *beacon; }; /** @@ -681,15 +700,6 @@ enum ieee80211_tkip_key_type { * any particular flags. There are some exceptions to this rule, * however, so you are advised to review these flags carefully. * - * @IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE: - * The device only needs to be supplied with a beacon template. - * If you need the host to generate each beacon then don't use - * this flag and call ieee80211_beacon_get() when you need the - * next beacon frame. Note that if you set this flag, you must - * implement the set_tim() callback for powersave mode to work - * properly. - * This flag is only relevant for access-point mode. - * * @IEEE80211_HW_RX_INCLUDES_FCS: * Indicates that received frames passed to the stack include * the FCS at the end. @@ -837,20 +847,12 @@ static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) static inline int ieee80211_num_regular_queues(struct ieee80211_hw *hw) { -#ifdef CONFIG_MAC80211_QOS return hw->queues; -#else - return 1; -#endif } static inline int ieee80211_num_queues(struct ieee80211_hw *hw) { -#ifdef CONFIG_MAC80211_QOS return hw->queues + hw->ampdu_queues; -#else - return 1; -#endif } static inline struct ieee80211_rate * @@ -1149,17 +1151,6 @@ enum ieee80211_ampdu_mlme_action { * function is optional if the firmware/hardware takes full care of * TSF synchronization. * - * @beacon_update: Setup beacon data for IBSS beacons. Unlike access point, - * IBSS uses a fixed beacon frame which is configured using this - * function. - * If the driver returns success (0) from this callback, it owns - * the skb. That means the driver is responsible to kfree_skb() it. - * The control structure is not dynamically allocated. That means the - * driver does not own the pointer and if it needs it somewhere - * outside of the context of this function, it must copy it - * somewhere else. - * This handler is required only for IBSS mode. - * * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us. * This is needed only for IBSS mode and the result of this function is * used to determine whether to reply to Probe Requests. @@ -1217,8 +1208,6 @@ struct ieee80211_ops { struct ieee80211_tx_queue_stats *stats); u64 (*get_tsf)(struct ieee80211_hw *hw); void (*reset_tsf)(struct ieee80211_hw *hw); - int (*beacon_update)(struct ieee80211_hw *hw, - struct sk_buff *skb); int (*tx_last_beacon)(struct ieee80211_hw *hw); int (*ampdu_action)(struct ieee80211_hw *hw, enum ieee80211_ampdu_mlme_action action,