X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=include%2Fmedia%2Ftuner-types.h;h=b201371416a0c793473b1fdd96dc9885f06746d5;hb=005011211f559113686938c2c252b8ee1ab855b5;hp=3c43b95f4c0dd5062b07b5d3864027b0ca0aff89;hpb=c4e00fac42f268ed0a547cdd1d12bb8399864040;p=linux-2.6

diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h
index 3c43b95f4c..b201371416 100644
--- a/include/media/tuner-types.h
+++ b/include/media/tuner-types.h
@@ -50,6 +50,10 @@ struct tuner_params {
 	   sensitivity. If this setting is 1, then set PORT2 to 1 to
 	   get proper FM reception. */
 	unsigned int port2_fm_high_sensitivity:1;
+	/* Some Philips tuners use tda9887 cGainNormal to select the FM radio
+	   sensitivity. If this setting is 1, e register will use cGainNormal
+	   instead of cGainLow. */
+	unsigned int fm_gain_normal:1;
 	/* Most tuners with a tda9887 use QSS mode. Some (cheaper) tuners
 	   use Intercarrier mode. If this setting is 1, then the tuner
 	   needs to be set to intercarrier mode. */
@@ -72,6 +76,13 @@ struct tuner_params {
 	unsigned int port2_invert_for_secam_lc:1;
 	/* Some cards require PORT1 to be 1 for mono Radio FM and 0 for stereo. */
 	unsigned int port1_set_for_fm_mono:1;
+	/* Select 18% (or according to datasheet 0%) L standard PLL gating,
+	   vs the driver default of 36%. */
+	unsigned int default_pll_gating_18:1;
+	/* IF to use in radio mode.  Tuners with a separate radio IF filter
+	   seem to use 10.7, while those without use 33.3 for PAL/SECAM tuners
+	   and 41.3 for NTSC tuners. 0 = 10.7, 1 = 33.3, 2 = 41.3 */
+	unsigned int radio_if:2;
 	/* Default tda9887 TOP value in dB for the low band. Default is 0.
 	   Range: -16:+15 */
 	signed int default_top_low:5;