X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=include%2Fasm-sh64%2Fio.h;h=7bd7314d38c209e12fc36bf9bfb4abafc8b1086a;hb=b3d9d6be035a7d1cc6740cee695301bf37caedcd;hp=14d8e7b4bf4b369254d49a0f458ec7c8b8a17c59;hpb=e50190a8341485b413f599033cb74649f849d939;p=linux-2.6

diff --git a/include/asm-sh64/io.h b/include/asm-sh64/io.h
index 14d8e7b4bf..7bd7314d38 100644
--- a/include/asm-sh64/io.h
+++ b/include/asm-sh64/io.h
@@ -31,10 +31,6 @@
 #include <asm/page.h>
 #include <asm-generic/iomap.h>
 
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-#define page_to_bus page_to_phys
-
 /*
  * Nothing overly special here.. instead of doing the same thing
  * over and over again, we just define a set of sh64_in/out functions
@@ -123,6 +119,13 @@ void insw(unsigned long port, void *addr, unsigned long count);
 void outsl(unsigned long port, const void *addr, unsigned long count);
 void insl(unsigned long port, void *addr, unsigned long count);
 
+#define inb_p(addr)    inb(addr)
+#define inw_p(addr)    inw(addr)
+#define inl_p(addr)    inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
 #define __raw_readb		readb
 #define __raw_readw		readw
 #define __raw_readl		readl
@@ -178,54 +181,6 @@ extern void iounmap(void *addr);
 unsigned long onchip_remap(unsigned long addr, unsigned long size, const char* name);
 extern void onchip_unmap(unsigned long vaddr);
 
-/*
- * The caches on some architectures aren't dma-coherent and have need to
- * handle this in software.  There are three types of operations that
- * can be applied to dma buffers.
- *
- *  - dma_cache_wback_inv(start, size) makes caches and RAM coherent by
- *    writing the content of the caches back to memory, if necessary.
- *    The function also invalidates the affected part of the caches as
- *    necessary before DMA transfers from outside to memory.
- *  - dma_cache_inv(start, size) invalidates the affected parts of the
- *    caches.  Dirty lines of the caches may be written back or simply
- *    be discarded.  This operation is necessary before dma operations
- *    to the memory.
- *  - dma_cache_wback(start, size) writes back any dirty lines but does
- *    not invalidate the cache.  This can be used before DMA reads from
- *    memory,
- */
-
-static __inline__ void dma_cache_wback_inv (unsigned long start, unsigned long size)
-{
-	unsigned long s = start & L1_CACHE_ALIGN_MASK;
-	unsigned long e = (start + size) & L1_CACHE_ALIGN_MASK;
-
-	for (; s <= e; s += L1_CACHE_BYTES)
-		asm volatile ("ocbp	%0, 0" : : "r" (s));
-}
-
-static __inline__ void dma_cache_inv (unsigned long start, unsigned long size)
-{
-	// Note that caller has to be careful with overzealous
-	// invalidation should there be partial cache lines at the extremities
-	// of the specified range
-	unsigned long s = start & L1_CACHE_ALIGN_MASK;
-	unsigned long e = (start + size) & L1_CACHE_ALIGN_MASK;
-
-	for (; s <= e; s += L1_CACHE_BYTES)
-		asm volatile ("ocbi	%0, 0" : : "r" (s));
-}
-
-static __inline__ void dma_cache_wback (unsigned long start, unsigned long size)
-{
-	unsigned long s = start & L1_CACHE_ALIGN_MASK;
-	unsigned long e = (start + size) & L1_CACHE_ALIGN_MASK;
-
-	for (; s <= e; s += L1_CACHE_BYTES)
-		asm volatile ("ocbwb	%0, 0" : : "r" (s));
-}
-
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
  * access