X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=include%2Fasm-arm%2Farch-ixp4xx%2Fnslu2.h;h=714bbc65126af1c26a3303ab79c659dfd65f8bc3;hb=0929ac3ea4c0bece16b0c5c5365181fa45fbf582;hp=6b437f7c99550e8e56ba5f575ac3814a7efb9c8e;hpb=11c302c14d8ddc47504bd3b650bc9e8da7c717b7;p=linux-2.6

diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h
index 6b437f7c99..714bbc6512 100644
--- a/include/asm-arm/arch-ixp4xx/nslu2.h
+++ b/include/asm-arm/arch-ixp4xx/nslu2.h
@@ -9,7 +9,7 @@
  * based on ixdp425.h:
  *	Copyright 2004 (c) MontaVista, Software, Inc.
  *
- * This file is licensed under  the terms of the GNU General Public
+ * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
@@ -34,61 +34,22 @@
 #define NSLU2_PCI_INTC_PIN	9
 #define NSLU2_PCI_INTD_PIN	8
 
-
 /* NSLU2 Timer */
 #define NSLU2_FREQ 66000000
-#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-
-/* GPIO */
-
-#define NSLU2_GPIO0		0
-#define NSLU2_GPIO1		1
-#define NSLU2_GPIO2		2
-#define NSLU2_GPIO3		3
-#define NSLU2_GPIO4		4
-#define NSLU2_GPIO5		5
-#define NSLU2_GPIO6		6
-#define NSLU2_GPIO7		7
-#define NSLU2_GPIO8		8
-#define NSLU2_GPIO9		9
-#define NSLU2_GPIO10		10
-#define NSLU2_GPIO11		11
-#define NSLU2_GPIO12		12
-#define NSLU2_GPIO13		13
-#define NSLU2_GPIO14		14
-#define NSLU2_GPIO15		15
 
 /* Buttons */
 
-#define NSLU2_PB_GPIO		NSLU2_GPIO5
-#define NSLU2_PO_GPIO		NSLU2_GPIO8	/* power off */
-#define NSLU2_RB_GPIO		NSLU2_GPIO12
-
-#define NSLU2_PB_IRQ		IRQ_IXP4XX_GPIO5
-#define NSLU2_RB_IRQ		IRQ_IXP4XX_GPIO12
-
-#define NSLU2_PB_BM		(1L << NSLU2_PB_GPIO)
-#define NSLU2_PO_BM		(1L << NSLU2_PO_GPIO)
-#define NSLU2_RB_BM		(1L << NSLU2_RB_GPIO)
+#define NSLU2_PB_GPIO		5	/* power button */
+#define NSLU2_PO_GPIO		8	/* power off */
+#define NSLU2_RB_GPIO		12	/* reset button */
 
 /* Buzzer */
 
 #define NSLU2_GPIO_BUZZ		4
-#define NSLU2_BZ_BM		(1L << NSLU2_GPIO_BUZZ)
 
 /* LEDs */
 
-#define NSLU2_LED_RED		NSLU2_GPIO0
-#define NSLU2_LED_GRN		NSLU2_GPIO1
-
-#define NSLU2_LED_RED_BM	(1L << NSLU2_LED_RED)
-#define NSLU2_LED_GRN_BM	(1L << NSLU2_LED_GRN)
-
-#define NSLU2_LED_DISK1		NSLU2_GPIO3
-#define NSLU2_LED_DISK2		NSLU2_GPIO2
-
-#define NSLU2_LED_DISK1_BM	(1L << NSLU2_GPIO2)
-#define NSLU2_LED_DISK2_BM	(1L << NSLU2_GPIO3)
-
-
+#define NSLU2_LED_RED_GPIO	0
+#define NSLU2_LED_GRN_GPIO	1
+#define NSLU2_LED_DISK1_GPIO	3
+#define NSLU2_LED_DISK2_GPIO	2