X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=include%2Fasm-arm%2Farch-at91%2Fat91_mci.h;h=400ec10014b45b8ee2b5782ef84e8339305e12b4;hb=eda3d8f5604860aae1bb9996bb5efc4213778369;hp=40a9876b661a1162aa11cbd401e7e872c611c390;hpb=cb2ebc59ff52cee770cfd6ba5f23a6cc3c214648;p=linux-2.6

diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h
index 40a9876b66..400ec10014 100644
--- a/include/asm-arm/arch-at91/at91_mci.h
+++ b/include/asm-arm/arch-at91/at91_mci.h
@@ -26,6 +26,9 @@
 #define AT91_MCI_MR		0x04		/* Mode Register */
 #define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
 #define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
+#define		AT91_MCI_RDPROOF	(1     << 11)	/* Read Proof Enable [SAM926[03] only] */
+#define		AT91_MCI_WRPROOF	(1     << 12)	/* Write Proof Enable [SAM926[03] only] */
+#define		AT91_MCI_PDCFBYTE	(1     << 13)	/* PDC Force Byte Transfer [SAM926[03] only] */
 #define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
 #define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
 #define		AT91_MCI_BLKLEN		(0xfff << 18)	/* Data Block Length */
@@ -72,6 +75,10 @@
 #define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
 #define			AT91_MCI_TRTYP_STREAM	(2 << 19)
 
+#define AT91_MCI_BLKR		0x18		/* Block Register */
+#define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
+#define		AT91_MCI_BLKR_BLKLEN(n)	((0xffff & (n)) << 16)	/* Block lenght */
+
 #define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
 #define AT91_MCR_RDR		0x30		/* Receive Data Register */
 #define AT91_MCR_TDR		0x34		/* Transmit Data Register */
@@ -86,7 +93,7 @@
 #define		AT91_MCI_ENDRX		(1 <<  6)	/* End of RX Buffer */
 #define		AT91_MCI_ENDTX		(1 <<  7)	/* End fo TX Buffer */
 #define		AT91_MCI_SDIOIRQA	(1 <<  8)	/* SDIO Interrupt for Slot A */
-#define		At91_MCI_SDIOIRQB	(1 <<  9)	/* SDIO Interrupt for Slot B [AT91RM9200 only] */
+#define		AT91_MCI_SDIOIRQB	(1 <<  9)	/* SDIO Interrupt for Slot B */
 #define		AT91_MCI_RXBUFF		(1 << 14)	/* RX Buffer Full */
 #define		AT91_MCI_TXBUFE		(1 << 15)	/* TX Buffer Empty */
 #define		AT91_MCI_RINDE		(1 << 16)	/* Response Index Error */