X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=fs%2Fjffs2%2Fscan.c;h=2a1c976c7924c8674cda40985a5848cfe9ff02ef;hb=ecd27b92fbb41f779d857632a69bd45dbaf0f915;hp=3af746eaff0ec124168e0baffa247de09253e68c;hpb=fe6ea1f7e5c2d3947bf62f2a219e69718ca0b187;p=linux-2.6 diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c index 3af746eaff..2a1c976c79 100644 --- a/fs/jffs2/scan.c +++ b/fs/jffs2/scan.c @@ -1,15 +1,14 @@ /* * JFFS2 -- Journalling Flash File System, Version 2. * - * Copyright (C) 2001-2003 Red Hat, Inc. + * Copyright © 2001-2007 Red Hat, Inc. * * Created by David Woodhouse * * For licensing information, see the file 'LICENCE' in this directory. * - * $Id: scan.c,v 1.125 2005/09/30 13:59:13 dedekind Exp $ - * */ + #include #include #include @@ -450,16 +449,20 @@ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblo #ifdef CONFIG_JFFS2_FS_WRITEBUFFER if (jffs2_cleanmarker_oob(c)) { - int ret = jffs2_check_nand_cleanmarker(c, jeb); + int ret; + + if (c->mtd->block_isbad(c->mtd, jeb->offset)) + return BLK_STATE_BADBLOCK; + + ret = jffs2_check_nand_cleanmarker(c, jeb); D2(printk(KERN_NOTICE "jffs_check_nand_cleanmarker returned %d\n",ret)); + /* Even if it's not found, we still scan to see if the block is empty. We use this information to decide whether to erase it or not. */ switch (ret) { case 0: cleanmarkerfound = 1; break; case 1: break; - case 2: return BLK_STATE_BADBLOCK; - case 3: return BLK_STATE_ALLDIRTY; /* Block has failed to erase min. once */ default: return ret; } } @@ -632,16 +635,17 @@ scan_more: if (*(uint32_t *)(&buf[ofs-buf_ofs]) == 0xffffffff) { uint32_t inbuf_ofs; - uint32_t empty_start; + uint32_t empty_start, scan_end; empty_start = ofs; ofs += 4; + scan_end = min_t(uint32_t, EMPTY_SCAN_SIZE(c->sector_size)/8, buf_len); D1(printk(KERN_DEBUG "Found empty flash at 0x%08x\n", ofs)); more_empty: inbuf_ofs = ofs - buf_ofs; - while (inbuf_ofs < buf_len) { - if (*(uint32_t *)(&buf[inbuf_ofs]) != 0xffffffff) { + while (inbuf_ofs < scan_end) { + if (unlikely(*(uint32_t *)(&buf[inbuf_ofs]) != 0xffffffff)) { printk(KERN_WARNING "Empty flash at 0x%08x ends at 0x%08x\n", empty_start, ofs); if ((err = jffs2_scan_dirty_space(c, jeb, ofs-empty_start))) @@ -662,7 +666,11 @@ scan_more: D1(printk(KERN_DEBUG "%d bytes at start of block seems clean... assuming all clean\n", EMPTY_SCAN_SIZE(c->sector_size))); return BLK_STATE_CLEANMARKER; } - + if (!buf_size && (scan_end != buf_len)) {/* XIP/point case */ + scan_end = buf_len; + goto more_empty; + } + /* See how much more there is to read in this eraseblock... */ buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs); if (!buf_len) { @@ -672,6 +680,8 @@ scan_more: empty_start)); break; } + /* point never reaches here */ + scan_end = buf_len; D1(printk(KERN_DEBUG "Reading another 0x%x at 0x%08x\n", buf_len, ofs)); err = jffs2_fill_scan_buf(c, buf, ofs, buf_len); if (err) @@ -731,8 +741,7 @@ scan_more: continue; } - if (ofs + je32_to_cpu(node->totlen) > - jeb->offset + c->sector_size) { + if (ofs + je32_to_cpu(node->totlen) > jeb->offset + c->sector_size) { /* Eep. Node goes over the end of the erase block. */ printk(KERN_WARNING "Node at 0x%08x with length 0x%08x would run over the end of the erase block\n", ofs, je32_to_cpu(node->totlen)); @@ -939,8 +948,7 @@ static int jffs2_scan_inode_node(struct jffs2_sb_info *c, struct jffs2_erasebloc struct jffs2_raw_inode *ri, uint32_t ofs, struct jffs2_summary *s) { struct jffs2_inode_cache *ic; - uint32_t ino = je32_to_cpu(ri->ino); - int err; + uint32_t crc, ino = je32_to_cpu(ri->ino); D1(printk(KERN_DEBUG "jffs2_scan_inode_node(): Node at 0x%08x\n", ofs)); @@ -953,21 +961,22 @@ static int jffs2_scan_inode_node(struct jffs2_sb_info *c, struct jffs2_erasebloc Which means that the _full_ amount of time to get to proper write mode with GC operational may actually be _longer_ than before. Sucks to be me. */ + /* Check the node CRC in any case. */ + crc = crc32(0, ri, sizeof(*ri)-8); + if (crc != je32_to_cpu(ri->node_crc)) { + printk(KERN_NOTICE "jffs2_scan_inode_node(): CRC failed on " + "node at 0x%08x: Read 0x%08x, calculated 0x%08x\n", + ofs, je32_to_cpu(ri->node_crc), crc); + /* + * We believe totlen because the CRC on the node + * _header_ was OK, just the node itself failed. + */ + return jffs2_scan_dirty_space(c, jeb, + PAD(je32_to_cpu(ri->totlen))); + } + ic = jffs2_get_ino_cache(c, ino); if (!ic) { - /* Inocache get failed. Either we read a bogus ino# or it's just genuinely the - first node we found for this inode. Do a CRC check to protect against the former - case */ - uint32_t crc = crc32(0, ri, sizeof(*ri)-8); - - if (crc != je32_to_cpu(ri->node_crc)) { - printk(KERN_NOTICE "jffs2_scan_inode_node(): CRC failed on node at 0x%08x: Read 0x%08x, calculated 0x%08x\n", - ofs, je32_to_cpu(ri->node_crc), crc); - /* We believe totlen because the CRC on the node _header_ was OK, just the node itself failed. */ - if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(ri->totlen))))) - return err; - return 0; - } ic = jffs2_scan_make_ino_cache(c, ino); if (!ic) return -ENOMEM;