X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=firmware%2FMakefile;h=da75a6fbc6baa1dec30fa37b6846c9b9d2e5fc88;hb=b693ffe67363119199ffe9f2fac9119475968e8a;hp=2f81089dfd2cf5e14a97aa2396fbe34ac3b23030;hpb=547d8bb7ddf7f5d9f53741086a394c8318e15f16;p=linux-2.6

diff --git a/firmware/Makefile b/firmware/Makefile
index 2f81089dfd..da75a6fbc6 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -20,6 +20,7 @@ fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
 # accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
 # But be aware that the config file might not be included at all.
 
+fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
 fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
 fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
@@ -27,8 +28,13 @@ fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
 fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
 fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
 				     ess/maestro3_assp_minisrc.fw
+fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
+				     sb16/ima_adpcm_init.csp \
+				     sb16/ima_adpcm_playback.csp \
+				     sb16/ima_adpcm_capture.csp
 fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
 				   yamaha/ds1e_ctrl.fw
+fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
 fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
 				  emi26/bitstream.fw
 fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
@@ -50,16 +56,21 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
 else
-fw-shipped- := keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw	\
+fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw	\
 	keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw		\
 	keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw		\
 	keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
 endif
 fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw
+fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
+					    edgeport/down.fw edgeport/down2.fw
+fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
 fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
 					   # whiteheat_loader_debug.fw
 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
 fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
+fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
+fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
 
 fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
 
@@ -123,7 +134,7 @@ $(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
 		| $(objtree)/$$(dir %)
 	$(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
 $(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
-		include/config/builtin/firmware/dir.h | $(objtree)/$$(dir %)
+		include/config/extra/firmware/dir.h | $(objtree)/$$(dir %)
 	$(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
 
 # The .o files depend on the binaries directly; the .S files don't.
@@ -135,15 +146,27 @@ $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
 $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,ihex)
 
+# Don't depend on ihex2fw if we're installing and it already exists.
+# Putting it after | in the dependencies doesn't seem sufficient when
+# we're installing after a cross-compile, because ihex2fw has dependencies
+# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and 
+# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
+# is exported read-only for someone to run 'make install'.
+ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
+ihex2fw_dep :=
+else
+ihex2fw_dep := $(obj)/ihex2fw
+endif
+
 # .HEX is also Intel HEX, but where the offset and length in each record
 # is actually meaningful, because the firmware has to be loaded in a certain
 # order rather than as a single binary blob. Thus, we convert them into our
 # more compact binary representation of ihex records (<linux/ihex.h>)
-$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,ihex2fw)
 
 # .H16 is our own modified form of Intel HEX, with 16-bit length for records.
-$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,h16tofw)
 
 $(firmware-dirs):