X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fwatchdog%2FKconfig;h=48399e134c0de37d31cfcd05fc16213b7bc7dc0e;hb=b14f7fb5aa2f4289e3a9fa8d7d92417ec8607498;hp=52dff40ec192caeea2042f07cb09021914c52c36;hpb=c63a1190368771b8207d86c4217ae4afdf1cbd5e;p=linux-2.6

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 52dff40ec1..48399e134c 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -223,7 +223,7 @@ config DAVINCI_WATCHDOG
 
 config AT32AP700X_WDT
 	tristate "AT32AP700x watchdog"
-	depends on CPU_AT32AP7000
+	depends on CPU_AT32AP700X
 	help
 	  Watchdog timer embedded into AT32AP700x devices. This will reboot
 	  your system when the timeout is reached.
@@ -295,6 +295,19 @@ config ALIM7101_WDT
 
 	  Most people will say N.
 
+config GEODE_WDT
+	tristate "AMD Geode CS5535/CS5536 Watchdog"
+	depends on MGEODE_LX
+	help
+	  This driver enables a watchdog capability built into the
+	  CS5535/CS5536 companion chips for the AMD Geode GX and LX
+	  processors.  This watchdog watches your kernel to make sure
+	  it doesn't freeze, and if it does, it reboots your computer after
+	  a certain amount of time.
+
+	  You can compile this driver directly into the kernel, or use
+	  it as a module.  The module will be called geodewdt.
+
 config SC520_WDT
 	tristate "AMD Elan SC520 processor Watchdog"
 	depends on X86
@@ -402,6 +415,18 @@ config IT8712F_WDT
 	  To compile this driver as a module, choose M here: the
 	  module will be called it8712f_wdt.
 
+config HP_WATCHDOG
+	tristate "HP Proliant iLO 2 Hardware Watchdog Timer"
+	depends on X86
+	help
+	  A software monitoring watchdog and NMI sourcing driver. This driver
+	  will detect lockups and provide stack trace. Also, when an NMI
+	  occurs this driver will make the necessary BIOS calls to log
+	  the cause of the NMI. This is a driver that will only load on a
+	  HP ProLiant system with a minimum of iLO2 support.
+	  To compile this driver as a module, choose M here: the
+	  module will be called hpwdt.
+
 config SC1200_WDT
 	tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
 	depends on X86
@@ -609,7 +634,7 @@ config SBC_EPX_C3_WATCHDOG
 
 config INDYDOG
 	tristate "Indy/I2 Hardware Watchdog"
-	depends on SGI_IP22
+	depends on SGI_HAS_INDYDOG
 	help
 	  Hardware driver for the Indy's/I2's watchdog. This is a
 	  watchdog timer that will reboot the machine after a 60 second
@@ -633,12 +658,31 @@ config WDT_RM9K_GPI
 	  To compile this driver as a module, choose M here: the
 	  module will be called rm9k_wdt.
 
+config SIBYTE_WDOG
+	tristate "Sibyte SoC hardware watchdog"
+	depends on CPU_SB1
+	help
+	  Watchdog driver for the built in watchdog hardware in Sibyte
+	  SoC processors.  There are apparently two watchdog timers
+	  on such processors; this driver supports only the first one,
+	  because currently Linux only supports exporting one watchdog
+	  to userspace.
+
+	  To compile this driver as a loadable module, choose M here.
+	  The module will be called sb_wdog.
+
 config AR7_WDT
 	tristate "TI AR7 Watchdog Timer"
 	depends on AR7
 	help
 	  Hardware driver for the TI AR7 Watchdog Timer.
 
+config TXX9_WDT
+	tristate "Toshiba TXx9 Watchdog Timer"
+	depends on CPU_TX39XX || CPU_TX49XX
+	help
+	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+
 # PARISC Architecture
 
 # POWERPC Architecture
@@ -744,8 +788,6 @@ config WATCHDOG_RIO
 	  machines.  The watchdog timeout period is normally one minute but
 	  can be changed with a boot-time parameter.
 
-# V850 Architecture
-
 # XTENSA Architecture
 
 #