X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fvideo%2Fpm3fb.c;h=68089d1456c25167c0ece4bc5789536e8b2eef6f;hb=491539982aa01fa71de93c2a06ac5d890d4cf1e2;hp=5b3f54c0918ee05d6e16d88808c2b9f34ecbd88a;hpb=e8b495fe09bc793ae26774e7b2667f7f658d56e2;p=linux-2.6

diff --git a/drivers/video/pm3fb.c b/drivers/video/pm3fb.c
index 5b3f54c091..68089d1456 100644
--- a/drivers/video/pm3fb.c
+++ b/drivers/video/pm3fb.c
@@ -32,6 +32,9 @@
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
 
 #include <video/pm3fb.h>
 
@@ -41,15 +44,25 @@
 
 #undef PM3FB_MASTER_DEBUG
 #ifdef PM3FB_MASTER_DEBUG
-#define DPRINTK(a,b...)	printk(KERN_DEBUG "pm3fb: %s: " a, __FUNCTION__ , ## b)
+#define DPRINTK(a, b...)	\
+	printk(KERN_DEBUG "pm3fb: %s: " a, __func__ , ## b)
 #else
-#define DPRINTK(a,b...)
+#define DPRINTK(a, b...)
 #endif
 
+#define PM3_PIXMAP_SIZE	(2048 * 4)
+
 /*
  * Driver data
  */
+static int hwcursor = 1;
 static char *mode_option __devinitdata;
+static int noaccel __devinitdata;
+
+/* mtrr option */
+#ifdef CONFIG_MTRR
+static int nomtrr __devinitdata;
+#endif
 
 /*
  * This structure defines the hardware state of the graphics card. Normally
@@ -61,8 +74,9 @@ static char *mode_option __devinitdata;
 struct pm3_par {
 	unsigned char	__iomem *v_regs;/* virtual address of p_regs */
 	u32		video;		/* video flags before blanking */
-	u32		base;		/* screen base (xoffset+yoffset) in 128 bits unit */
+	u32		base;		/* screen base in 128 bits unit */
 	u32		palette[16];
+	int		mtrr_handle;
 };
 
 /*
@@ -96,7 +110,8 @@ static inline void PM3_WRITE_REG(struct pm3_par *par, s32 off, u32 v)
 
 static inline void PM3_WAIT(struct pm3_par *par, u32 n)
 {
-	while (PM3_READ_REG(par, PM3InFIFOSpace) < n);
+	while (PM3_READ_REG(par, PM3InFIFOSpace) < n)
+		cpu_relax();
 }
 
 static inline void PM3_WRITE_DAC_REG(struct pm3_par *par, unsigned r, u8 v)
@@ -133,7 +148,7 @@ static void pm3fb_clear_colormap(struct pm3_par *par,
 
 }
 
-/* Calculating various clock parameter */
+/* Calculating various clock parameters */
 static void pm3fb_calculate_clock(unsigned long reqclock,
 				unsigned char *prescale,
 				unsigned char *feedback,
@@ -164,7 +179,7 @@ static void pm3fb_calculate_clock(unsigned long reqclock,
 
 static inline int pm3fb_depth(const struct fb_var_screeninfo *var)
 {
-	if ( var->bits_per_pixel == 16 )
+	if (var->bits_per_pixel == 16)
 		return var->red.length + var->green.length
 			+ var->blue.length;
 
@@ -195,8 +210,8 @@ static int pm3fb_sync(struct fb_info *info)
 	PM3_WRITE_REG(par, PM3Sync, 0);
 	mb();
 	do {
-		while ((PM3_READ_REG(par, PM3OutFIFOWords)) == 0);
-		rmb();
+		while ((PM3_READ_REG(par, PM3OutFIFOWords)) == 0)
+			cpu_relax();
 	} while ((PM3_READ_REG(par, PM3OutputFifo)) != PM3Sync_Tag);
 
 	return 0;
@@ -276,15 +291,22 @@ static void pm3fb_init_engine(struct fb_info *info)
 
 	PM3_WAIT(par, 2);
 	{
-		unsigned long rm = 1;
+		/* invert bits in bitmask */
+		unsigned long rm = 1 | (3 << 7);
 		switch (info->var.bits_per_pixel) {
 		case 8:
 			PM3_WRITE_REG(par, PM3PixelSize,
 					   PM3PixelSize_GLOBAL_8BIT);
+#ifdef __BIG_ENDIAN
+			rm |= 3 << 15;
+#endif
 			break;
 		case 16:
 			PM3_WRITE_REG(par, PM3PixelSize,
 					   PM3PixelSize_GLOBAL_16BIT);
+#ifdef __BIG_ENDIAN
+			rm |= 2 << 15;
+#endif
 			break;
 		case 32:
 			PM3_WRITE_REG(par, PM3PixelSize,
@@ -342,7 +364,7 @@ static void pm3fb_init_engine(struct fb_info *info)
 
 	PM3_WRITE_REG(par, PM3dXDom, 0x0);
 	PM3_WRITE_REG(par, PM3dXSub, 0x0);
-	PM3_WRITE_REG(par, PM3dY, (1 << 16));
+	PM3_WRITE_REG(par, PM3dY, 1 << 16);
 	PM3_WRITE_REG(par, PM3StartXDom, 0x0);
 	PM3_WRITE_REG(par, PM3StartXSub, 0x0);
 	PM3_WRITE_REG(par, PM3StartY, 0x0);
@@ -357,71 +379,350 @@ static void pm3fb_init_engine(struct fb_info *info)
 	pm3fb_sync(info);
 }
 
-static void pm3fb_fillrect (struct fb_info *info,
+static void pm3fb_fillrect(struct fb_info *info,
 				const struct fb_fillrect *region)
 {
 	struct pm3_par *par = info->par;
 	struct fb_fillrect modded;
 	int vxres, vyres;
+	int rop;
 	u32 color = (info->fix.visual == FB_VISUAL_TRUECOLOR) ?
-		((u32*)info->pseudo_palette)[region->color] : region->color;
+		((u32 *)info->pseudo_palette)[region->color] : region->color;
 
 	if (info->state != FBINFO_STATE_RUNNING)
 		return;
-	if ((info->flags & FBINFO_HWACCEL_DISABLED) ||
-		region->rop != ROP_COPY ) {
+	if (info->flags & FBINFO_HWACCEL_DISABLED) {
 		cfb_fillrect(info, region);
 		return;
 	}
+	if (region->rop == ROP_COPY )
+		rop = PM3Config2D_ForegroundROP(0x3); /* GXcopy */
+	else
+		rop = PM3Config2D_ForegroundROP(0x6) | /* GXxor */
+			PM3Config2D_FBDestReadEnable;
 
 	vxres = info->var.xres_virtual;
 	vyres = info->var.yres_virtual;
 
 	memcpy(&modded, region, sizeof(struct fb_fillrect));
 
-	if(!modded.width || !modded.height ||
-	   modded.dx >= vxres || modded.dy >= vyres)
+	if (!modded.width || !modded.height ||
+	    modded.dx >= vxres || modded.dy >= vyres)
 		return;
 
-	if(modded.dx + modded.width  > vxres)
+	if (modded.dx + modded.width  > vxres)
 		modded.width  = vxres - modded.dx;
-	if(modded.dy + modded.height > vyres)
+	if (modded.dy + modded.height > vyres)
 		modded.height = vyres - modded.dy;
 
-	if(info->var.bits_per_pixel == 8)
+	if (info->var.bits_per_pixel == 8)
 		color |= color << 8;
-	if(info->var.bits_per_pixel <= 16)
+	if (info->var.bits_per_pixel <= 16)
 		color |= color << 16;
 
 	PM3_WAIT(par, 4);
-
+	/* ROP Ox3 is GXcopy */
 	PM3_WRITE_REG(par, PM3Config2D,
-				  PM3Config2D_UseConstantSource |
-				  PM3Config2D_ForegroundROPEnable |
-				  (PM3Config2D_ForegroundROP(0x3)) |	/* Ox3 is GXcopy */
-				  PM3Config2D_FBWriteEnable);
+			PM3Config2D_UseConstantSource |
+			PM3Config2D_ForegroundROPEnable |
+			rop |
+			PM3Config2D_FBWriteEnable);
 
 	PM3_WRITE_REG(par, PM3ForegroundColor, color);
 
 	PM3_WRITE_REG(par, PM3RectanglePosition,
-		      (PM3RectanglePosition_XOffset(modded.dx)) |
-		      (PM3RectanglePosition_YOffset(modded.dy)));
+			PM3RectanglePosition_XOffset(modded.dx) |
+			PM3RectanglePosition_YOffset(modded.dy));
 
 	PM3_WRITE_REG(par, PM3Render2D,
 		      PM3Render2D_XPositive |
 		      PM3Render2D_YPositive |
 		      PM3Render2D_Operation_Normal |
 		      PM3Render2D_SpanOperation |
-		      (PM3Render2D_Width(modded.width)) |
-		      (PM3Render2D_Height(modded.height)));
+		      PM3Render2D_Width(modded.width) |
+		      PM3Render2D_Height(modded.height));
+}
+
+static void pm3fb_copyarea(struct fb_info *info,
+				const struct fb_copyarea *area)
+{
+	struct pm3_par *par = info->par;
+	struct fb_copyarea modded;
+	u32 vxres, vyres;
+	int x_align, o_x, o_y;
+
+	if (info->state != FBINFO_STATE_RUNNING)
+		return;
+	if (info->flags & FBINFO_HWACCEL_DISABLED) {
+		cfb_copyarea(info, area);
+		return;
+	}
+
+	memcpy(&modded, area, sizeof(struct fb_copyarea));
+
+	vxres = info->var.xres_virtual;
+	vyres = info->var.yres_virtual;
+
+	if (!modded.width || !modded.height ||
+	    modded.sx >= vxres || modded.sy >= vyres ||
+	    modded.dx >= vxres || modded.dy >= vyres)
+		return;
+
+	if (modded.sx + modded.width > vxres)
+		modded.width = vxres - modded.sx;
+	if (modded.dx + modded.width > vxres)
+		modded.width = vxres - modded.dx;
+	if (modded.sy + modded.height > vyres)
+		modded.height = vyres - modded.sy;
+	if (modded.dy + modded.height > vyres)
+		modded.height = vyres - modded.dy;
+
+	o_x = modded.sx - modded.dx;	/*(sx > dx ) ? (sx - dx) : (dx - sx); */
+	o_y = modded.sy - modded.dy;	/*(sy > dy ) ? (sy - dy) : (dy - sy); */
+
+	x_align = (modded.sx & 0x1f);
+
+	PM3_WAIT(par, 6);
+
+	PM3_WRITE_REG(par, PM3Config2D,
+			PM3Config2D_UserScissorEnable |
+			PM3Config2D_ForegroundROPEnable |
+			PM3Config2D_Blocking |
+			PM3Config2D_ForegroundROP(0x3) | /* Ox3 is GXcopy */
+			PM3Config2D_FBWriteEnable);
+
+	PM3_WRITE_REG(par, PM3ScissorMinXY,
+			((modded.dy & 0x0fff) << 16) | (modded.dx & 0x0fff));
+	PM3_WRITE_REG(par, PM3ScissorMaxXY,
+			(((modded.dy + modded.height) & 0x0fff) << 16) |
+			((modded.dx + modded.width) & 0x0fff));
+
+	PM3_WRITE_REG(par, PM3FBSourceReadBufferOffset,
+			PM3FBSourceReadBufferOffset_XOffset(o_x) |
+			PM3FBSourceReadBufferOffset_YOffset(o_y));
+
+	PM3_WRITE_REG(par, PM3RectanglePosition,
+			PM3RectanglePosition_XOffset(modded.dx - x_align) |
+			PM3RectanglePosition_YOffset(modded.dy));
+
+	PM3_WRITE_REG(par, PM3Render2D,
+			((modded.sx > modded.dx) ? PM3Render2D_XPositive : 0) |
+			((modded.sy > modded.dy) ? PM3Render2D_YPositive : 0) |
+			PM3Render2D_Operation_Normal |
+			PM3Render2D_SpanOperation |
+			PM3Render2D_FBSourceReadEnable |
+			PM3Render2D_Width(modded.width + x_align) |
+			PM3Render2D_Height(modded.height));
+}
+
+static void pm3fb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	struct pm3_par *par = info->par;
+	u32 height = image->height;
+	u32 fgx, bgx;
+	const u32 *src = (const u32 *)image->data;
+
+	if (info->state != FBINFO_STATE_RUNNING)
+		return;
+	if (info->flags & FBINFO_HWACCEL_DISABLED) {
+		cfb_imageblit(info, image);
+		return;
+	}
+	switch (info->fix.visual) {
+	case FB_VISUAL_PSEUDOCOLOR:
+		fgx = image->fg_color;
+		bgx = image->bg_color;
+		break;
+	case FB_VISUAL_TRUECOLOR:
+	default:
+		fgx = par->palette[image->fg_color];
+		bgx = par->palette[image->bg_color];
+		break;
+	}
+	if (image->depth != 1)
+		return cfb_imageblit(info, image);
+
+	if (info->var.bits_per_pixel == 8) {
+		fgx |= fgx << 8;
+		bgx |= bgx << 8;
+	}
+	if (info->var.bits_per_pixel <= 16) {
+		fgx |= fgx << 16;
+		bgx |= bgx << 16;
+	}
+
+	PM3_WAIT(par, 7);
+
+	PM3_WRITE_REG(par, PM3ForegroundColor, fgx);
+	PM3_WRITE_REG(par, PM3BackgroundColor, bgx);
+
+	/* ROP Ox3 is GXcopy */
+	PM3_WRITE_REG(par, PM3Config2D,
+			PM3Config2D_UserScissorEnable |
+			PM3Config2D_UseConstantSource |
+			PM3Config2D_ForegroundROPEnable |
+			PM3Config2D_ForegroundROP(0x3) |
+			PM3Config2D_OpaqueSpan |
+			PM3Config2D_FBWriteEnable);
+	PM3_WRITE_REG(par, PM3ScissorMinXY,
+			((image->dy & 0x0fff) << 16) | (image->dx & 0x0fff));
+	PM3_WRITE_REG(par, PM3ScissorMaxXY,
+			(((image->dy + image->height) & 0x0fff) << 16) |
+			((image->dx + image->width) & 0x0fff));
+	PM3_WRITE_REG(par, PM3RectanglePosition,
+			PM3RectanglePosition_XOffset(image->dx) |
+			PM3RectanglePosition_YOffset(image->dy));
+	PM3_WRITE_REG(par, PM3Render2D,
+			PM3Render2D_XPositive |
+			PM3Render2D_YPositive |
+			PM3Render2D_Operation_SyncOnBitMask |
+			PM3Render2D_SpanOperation |
+			PM3Render2D_Width(image->width) |
+			PM3Render2D_Height(image->height));
+
+
+	while (height--) {
+		int width = ((image->width + 7) >> 3)
+				+ info->pixmap.scan_align - 1;
+		width >>= 2;
+
+		while (width >= PM3_FIFO_SIZE) {
+			int i = PM3_FIFO_SIZE - 1;
+
+			PM3_WAIT(par, PM3_FIFO_SIZE);
+			while (i--) {
+				PM3_WRITE_REG(par, PM3BitMaskPattern, *src);
+				src++;
+			}
+			width -= PM3_FIFO_SIZE - 1;
+		}
+
+		PM3_WAIT(par, width + 1);
+		while (width--) {
+			PM3_WRITE_REG(par, PM3BitMaskPattern, *src);
+			src++;
+		}
+	}
 }
 /* end of acceleration functions */
 
+/*
+ *	Hardware Cursor support.
+ */
+static const u8 cursor_bits_lookup[16] = {
+	0x00, 0x40, 0x10, 0x50, 0x04, 0x44, 0x14, 0x54,
+	0x01, 0x41, 0x11, 0x51, 0x05, 0x45, 0x15, 0x55
+};
+
+static int pm3fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+	struct pm3_par *par = info->par;
+	u8 mode;
+
+	if (!hwcursor)
+		return -EINVAL;	/* just to force soft_cursor() call */
+
+	/* Too large of a cursor or wrong bpp :-( */
+	if (cursor->image.width > 64 ||
+	    cursor->image.height > 64 ||
+	    cursor->image.depth > 1)
+		return -EINVAL;
+
+	mode = PM3RD_CursorMode_TYPE_X;
+	if (cursor->enable)
+		 mode |= PM3RD_CursorMode_CURSOR_ENABLE;
+
+	PM3_WRITE_DAC_REG(par, PM3RD_CursorMode, mode);
+
+	/*
+	 * If the cursor is not be changed this means either we want the
+	 * current cursor state (if enable is set) or we want to query what
+	 * we can do with the cursor (if enable is not set)
+	 */
+	if (!cursor->set)
+		return 0;
+
+	if (cursor->set & FB_CUR_SETPOS) {
+		int x = cursor->image.dx - info->var.xoffset;
+		int y = cursor->image.dy - info->var.yoffset;
+
+		PM3_WRITE_DAC_REG(par, PM3RD_CursorXLow, x & 0xff);
+		PM3_WRITE_DAC_REG(par, PM3RD_CursorXHigh, (x >> 8) & 0xf);
+		PM3_WRITE_DAC_REG(par, PM3RD_CursorYLow, y & 0xff);
+		PM3_WRITE_DAC_REG(par, PM3RD_CursorYHigh, (y >> 8) & 0xf);
+	}
+
+	if (cursor->set & FB_CUR_SETHOT) {
+		PM3_WRITE_DAC_REG(par, PM3RD_CursorHotSpotX,
+				  cursor->hot.x & 0x3f);
+		PM3_WRITE_DAC_REG(par, PM3RD_CursorHotSpotY,
+				  cursor->hot.y & 0x3f);
+	}
+
+	if (cursor->set & FB_CUR_SETCMAP) {
+		u32 fg_idx = cursor->image.fg_color;
+		u32 bg_idx = cursor->image.bg_color;
+		struct fb_cmap cmap = info->cmap;
+
+		/* the X11 driver says one should use these color registers */
+		PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(39),
+				  cmap.red[fg_idx] >> 8 );
+		PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(40),
+				  cmap.green[fg_idx] >> 8 );
+		PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(41),
+				  cmap.blue[fg_idx] >> 8 );
+
+		PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(42),
+				  cmap.red[bg_idx] >> 8 );
+		PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(43),
+				  cmap.green[bg_idx] >> 8 );
+		PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(44),
+				  cmap.blue[bg_idx] >> 8 );
+	}
+
+	if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) {
+		u8 *bitmap = (u8 *)cursor->image.data;
+		u8 *mask = (u8 *)cursor->mask;
+		int i;
+		int pos = PM3RD_CursorPattern(0);
+
+		for (i = 0; i < cursor->image.height; i++) {
+			int j = (cursor->image.width + 7) >> 3;
+			int k = 8 - j;
+
+			for (; j > 0; j--) {
+				u8 data = *bitmap ^ *mask;
+
+				if (cursor->rop == ROP_COPY)
+					data = *mask & *bitmap;
+				/* Upper 4 bits of bitmap data */
+				PM3_WRITE_DAC_REG(par, pos++,
+					cursor_bits_lookup[data >> 4] |
+					(cursor_bits_lookup[*mask >> 4] << 1));
+				/* Lower 4 bits of bitmap */
+				PM3_WRITE_DAC_REG(par, pos++,
+					cursor_bits_lookup[data & 0xf] |
+					(cursor_bits_lookup[*mask & 0xf] << 1));
+				bitmap++;
+				mask++;
+			}
+			for (; k > 0; k--) {
+				PM3_WRITE_DAC_REG(par, pos++, 0);
+				PM3_WRITE_DAC_REG(par, pos++, 0);
+			}
+		}
+		while (pos < PM3RD_CursorPattern(1024))
+			PM3_WRITE_DAC_REG(par, pos++, 0);
+	}
+	return 0;
+}
+
 /* write the mode to registers */
 static void pm3fb_write_mode(struct fb_info *info)
 {
 	struct pm3_par *par = info->par;
-	char tempsync = 0x00, tempmisc = 0x00;
+	char tempsync = 0x00;
+	char tempmisc = 0x00;
 	const u32 hsstart = info->var.right_margin;
 	const u32 hsend = hsstart + info->var.hsync_len;
 	const u32 hbend = hsend + info->var.left_margin;
@@ -618,47 +919,57 @@ static int pm3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	unsigned bpp = var->red.length + var->green.length
 			+ var->blue.length + var->transp.length;
 
-	if ( bpp != var->bits_per_pixel ) {
+	if (bpp != var->bits_per_pixel) {
 		/* set predefined mode for bits_per_pixel settings */
 
-		switch(var->bits_per_pixel) {
+		switch (var->bits_per_pixel) {
 		case 8:
-			var->red.length = var->green.length = var->blue.length = 8;
-			var->red.offset = var->green.offset = var->blue.offset = 0;
+			var->red.length = 8;
+			var->green.length = 8;
+			var->blue.length = 8;
+			var->red.offset = 0;
+			var->green.offset = 0;
+			var->blue.offset = 0;
 			var->transp.offset = 0;
 			var->transp.length = 0;
 			break;
 		case 16:
-			var->red.length = var->blue.length = 5;
+			var->red.length = 5;
+			var->blue.length = 5;
 			var->green.length = 6;
 			var->transp.length = 0;
 			break;
 		case 32:
-			var->red.length = var->green.length = var->blue.length = 8;
+			var->red.length = 8;
+			var->green.length = 8;
+			var->blue.length = 8;
 			var->transp.length = 8;
 			break;
 		default:
-			DPRINTK("depth not supported: %u\n", var->bits_per_pixel);
+			DPRINTK("depth not supported: %u\n",
+				var->bits_per_pixel);
 			return -EINVAL;
 		}
 	}
 	/* it is assumed BGRA order */
-	if (var->bits_per_pixel > 8 )
-	{
+	if (var->bits_per_pixel > 8 ) {
 		var->blue.offset = 0;
 		var->green.offset = var->blue.length;
 		var->red.offset = var->green.offset + var->green.length;
 		var->transp.offset = var->red.offset + var->red.length;
 	}
-	var->height = var->width = -1;
+	var->height = -1;
+	var->width = -1;
 
 	if (var->xres != var->xres_virtual) {
-		DPRINTK("virtual x resolution != physical x resolution not supported\n");
+		DPRINTK("virtual x resolution != "
+			"physical x resolution not supported\n");
 		return -EINVAL;
 	}
 
 	if (var->yres > var->yres_virtual) {
-		DPRINTK("virtual y resolution < physical y resolution not possible\n");
+		DPRINTK("virtual y resolution < "
+			"physical y resolution not possible\n");
 		return -EINVAL;
 	}
 
@@ -673,7 +984,7 @@ static int pm3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	}
 
 	var->xres = (var->xres + 31) & ~31; /* could sometimes be 8 */
-	lpitch = var->xres * ((var->bits_per_pixel + 7)>>3);
+	lpitch = var->xres * ((var->bits_per_pixel + 7) >> 3);
 
 	if (var->xres < 200 || var->xres > 2048) {
 		DPRINTK("width not supported: %u\n", var->xres);
@@ -692,7 +1003,8 @@ static int pm3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	}
 
 	if (PICOS2KHZ(var->pixclock) > PM3_MAX_PIXCLOCK) {
-		DPRINTK("pixclock too high (%ldKHz)\n", PICOS2KHZ(var->pixclock));
+		DPRINTK("pixclock too high (%ldKHz)\n",
+			PICOS2KHZ(var->pixclock));
 		return -EINVAL;
 	}
 
@@ -709,7 +1021,7 @@ static int pm3fb_set_par(struct fb_info *info)
 	const u32 xres = (info->var.xres + 31) & ~31;
 	const unsigned bpp = info->var.bits_per_pixel;
 
-	par->base = pm3fb_shift_bpp(bpp,(info->var.yoffset * xres)
+	par->base = pm3fb_shift_bpp(bpp, (info->var.yoffset * xres)
 					+ info->var.xoffset);
 	par->video = 0;
 
@@ -725,15 +1037,12 @@ static int pm3fb_set_par(struct fb_info *info)
 
 	if ((info->var.vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE)
 		par->video |= PM3VideoControl_LINE_DOUBLE_ON;
-	else
-		par->video |= PM3VideoControl_LINE_DOUBLE_OFF;
 
 	if ((info->var.activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW)
 		par->video |= PM3VideoControl_ENABLE;
-	else {
-		par->video |= PM3VideoControl_DISABLE;
+	else
 		DPRINTK("PM3Video disabled\n");
-	}
+
 	switch (bpp) {
 	case 8:
 		par->video |= PM3VideoControl_PIXELSIZE_8BIT;
@@ -751,13 +1060,11 @@ static int pm3fb_set_par(struct fb_info *info)
 
 	info->fix.visual =
 		(bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
-	info->fix.line_length = ((info->var.xres_virtual + 7)  & ~7)
-					* bpp / 8;
+	info->fix.line_length = ((info->var.xres_virtual + 7)  >> 3) * bpp;
 
 /*	pm3fb_clear_memory(info, 0);*/
 	pm3fb_clear_colormap(par, 0, 0, 0);
-	PM3_WRITE_DAC_REG(par, PM3RD_CursorMode,
-			  PM3RD_CursorMode_CURSOR_DISABLE);
+	PM3_WRITE_DAC_REG(par, PM3RD_CursorMode, 0);
 	pm3fb_init_engine(info);
 	pm3fb_write_mode(info);
 	return 0;
@@ -773,10 +1080,9 @@ static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	   return -EINVAL;
 
 	/* grayscale works only partially under directcolor */
-	if (info->var.grayscale) {
-	   /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+	/* grayscale = 0.30*R + 0.59*G + 0.11*B */
+	if (info->var.grayscale)
 	   red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
-	}
 
 	/* Directcolor:
 	 *   var->{color}.offset contains start of bitfield
@@ -790,8 +1096,8 @@ static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	 *
 	 * Pseudocolor:
 	 *	var->{color}.offset is 0
-	 *	var->{color}.length contains width of DAC or the number of unique
-	 *			colors available (color depth)
+	 *	var->{color}.length contains width of DAC or the number
+	 *			of unique colors available (color depth)
 	 *	pseudo_palette is not used
 	 *	RAMDAC[X] is programmed to (red, green, blue)
 	 *	color depth = var->{color}.length
@@ -801,7 +1107,7 @@ static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	 * This is the point where the color is converted to something that
 	 * is acceptable by the hardware.
 	 */
-#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
+#define CNVT_TOHW(val, width) ((((val) << (width)) + 0x7FFF - (val)) >> 16)
 	red = CNVT_TOHW(red, info->var.red.length);
 	green = CNVT_TOHW(green, info->var.green.length);
 	blue = CNVT_TOHW(blue, info->var.blue.length);
@@ -825,12 +1131,11 @@ static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 			break;
 		case 16:
 		case 32:
-			((u32*)(info->pseudo_palette))[regno] = v;
+			((u32 *)(info->pseudo_palette))[regno] = v;
 			break;
 		}
 		return 0;
-	}
-	else if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
+	} else if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
 		pm3fb_set_color(par, regno, red, green, blue);
 
 	return 0;
@@ -871,7 +1176,7 @@ static int pm3fb_blank(int blank_mode, struct fb_info *info)
 		video |= PM3VideoControl_ENABLE;
 		break;
 	case FB_BLANK_NORMAL:
-		video &= ~(PM3VideoControl_ENABLE);
+		video &= ~PM3VideoControl_ENABLE;
 		break;
 	case FB_BLANK_HSYNC_SUSPEND:
 		video &= ~(PM3VideoControl_HSYNC_MASK |
@@ -892,7 +1197,7 @@ static int pm3fb_blank(int blank_mode, struct fb_info *info)
 	}
 
 	PM3_WAIT(par, 1);
-	PM3_WRITE_REG(par,PM3VideoControl, video);
+	PM3_WRITE_REG(par, PM3VideoControl, video);
 	return 0;
 }
 
@@ -907,10 +1212,11 @@ static struct fb_ops pm3fb_ops = {
 	.fb_setcolreg	= pm3fb_setcolreg,
 	.fb_pan_display	= pm3fb_pan_display,
 	.fb_fillrect	= pm3fb_fillrect,
-	.fb_copyarea	= cfb_copyarea,
-	.fb_imageblit	= cfb_imageblit,
+	.fb_copyarea	= pm3fb_copyarea,
+	.fb_imageblit	= pm3fb_imageblit,
 	.fb_blank	= pm3fb_blank,
 	.fb_sync	= pm3fb_sync,
+	.fb_cursor	= pm3fb_cursor,
 };
 
 /* ------------------------------------------------------------------------- */
@@ -921,9 +1227,10 @@ static struct fb_ops pm3fb_ops = {
 
 /* mmio register are already mapped when this function is called */
 /* the pm3fb_fix.smem_start is also set */
-static unsigned long pm3fb_size_memory(struct pm3_par *par)
+static unsigned long __devinit pm3fb_size_memory(struct pm3_par *par)
 {
-	unsigned long	memsize = 0, tempBypass, i, temp1, temp2;
+	unsigned long	memsize = 0;
+	unsigned long	tempBypass, i, temp1, temp2;
 	unsigned char	__iomem *screen_mem;
 
 	pm3fb_fix.smem_len = 64 * 1024l * 1024; /* request full aperture size */
@@ -951,7 +1258,9 @@ static unsigned long pm3fb_size_memory(struct pm3_par *par)
 	PM3_WAIT(par, 1);
 	PM3_WRITE_REG(par, PM3MemBypassWriteMask, 0xFFFFFFFF);
 
-	/* pm3 split up memory, replicates, and do a lot of nasty stuff IMHO ;-) */
+	/* pm3 split up memory, replicates, and do a lot of
+	 * nasty stuff IMHO ;-)
+	 */
 	for (i = 0; i < 32; i++) {
 		fb_writel(i * 0x00345678,
 			  (screen_mem + (i * 1048576)));
@@ -1008,8 +1317,9 @@ static int __devinit pm3fb_probe(struct pci_dev *dev,
 {
 	struct fb_info *info;
 	struct pm3_par *par;
-	struct device* device = &dev->dev; /* for pci drivers */
-	int err, retval = -ENXIO;
+	struct device *device = &dev->dev; /* for pci drivers */
+	int err;
+	int retval = -ENXIO;
 
 	err = pci_enable_device(dev);
 	if (err) {
@@ -1031,6 +1341,10 @@ static int __devinit pm3fb_probe(struct pci_dev *dev,
 	 */
 	pm3fb_fix.mmio_start = pci_resource_start(dev, 0);
 	pm3fb_fix.mmio_len = PM3_REGS_SIZE;
+#if defined(__BIG_ENDIAN)
+	pm3fb_fix.mmio_start += PM3_REGS_SIZE;
+	DPRINTK("Adjusting register base for big-endian.\n");
+#endif
 
 	/* Registers - request region and map it. */
 	if (!request_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len,
@@ -1047,15 +1361,10 @@ static int __devinit pm3fb_probe(struct pci_dev *dev,
 		goto err_exit_neither;
 	}
 
-#if defined(__BIG_ENDIAN)
-	pm3fb_fix.mmio_start += PM3_REGS_SIZE;
-	DPRINTK("Adjusting register base for big-endian.\n");
-#endif
 	/* Linear frame buffer - request region and map it. */
 	pm3fb_fix.smem_start = pci_resource_start(dev, 1);
 	pm3fb_fix.smem_len = pm3fb_size_memory(par);
-	if (!pm3fb_fix.smem_len)
-	{
+	if (!pm3fb_fix.smem_len) {
 		printk(KERN_WARNING "pm3fb: Can't find memory on board.\n");
 		goto err_exit_mmio;
 	}
@@ -1073,6 +1382,12 @@ static int __devinit pm3fb_probe(struct pci_dev *dev,
 	}
 	info->screen_size = pm3fb_fix.smem_len;
 
+#ifdef CONFIG_MTRR
+	if (!nomtrr)
+		par->mtrr_handle = mtrr_add(pm3fb_fix.smem_start,
+						pm3fb_fix.smem_len,
+						MTRR_TYPE_WRCOMB, 1);
+#endif
 	info->fbops = &pm3fb_ops;
 
 	par->video = PM3_READ_REG(par, PM3VideoControl);
@@ -1080,7 +1395,26 @@ static int __devinit pm3fb_probe(struct pci_dev *dev,
 	info->fix = pm3fb_fix;
 	info->pseudo_palette = par->palette;
 	info->flags = FBINFO_DEFAULT |
-			FBINFO_HWACCEL_FILLRECT;/* | FBINFO_HWACCEL_YPAN;*/
+			FBINFO_HWACCEL_XPAN |
+			FBINFO_HWACCEL_YPAN |
+			FBINFO_HWACCEL_COPYAREA |
+			FBINFO_HWACCEL_IMAGEBLIT |
+			FBINFO_HWACCEL_FILLRECT;
+
+	if (noaccel) {
+		printk(KERN_DEBUG "disabling acceleration\n");
+		info->flags |= FBINFO_HWACCEL_DISABLED;
+	}
+	info->pixmap.addr = kmalloc(PM3_PIXMAP_SIZE, GFP_KERNEL);
+	if (!info->pixmap.addr) {
+		retval = -ENOMEM;
+		goto err_exit_pixmap;
+	}
+	info->pixmap.size = PM3_PIXMAP_SIZE;
+	info->pixmap.buf_align = 4;
+	info->pixmap.scan_align = 4;
+	info->pixmap.access_align = 32;
+	info->pixmap.flags = FB_PIXMAP_SYSTEM;
 
 	/*
 	 * This should give a reasonable default video mode. The following is
@@ -1118,6 +1452,8 @@ static int __devinit pm3fb_probe(struct pci_dev *dev,
  err_exit_all:
 	fb_dealloc_cmap(&info->cmap);
  err_exit_both:
+	kfree(info->pixmap.addr);
+ err_exit_pixmap:
 	iounmap(info->screen_base);
 	release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
  err_exit_mmio:
@@ -1142,12 +1478,18 @@ static void __devexit pm3fb_remove(struct pci_dev *dev)
 		unregister_framebuffer(info);
 		fb_dealloc_cmap(&info->cmap);
 
+#ifdef CONFIG_MTRR
+	if (par->mtrr_handle >= 0)
+		mtrr_del(par->mtrr_handle, info->fix.smem_start,
+			 info->fix.smem_len);
+#endif /* CONFIG_MTRR */
 		iounmap(info->screen_base);
 		release_mem_region(fix->smem_start, fix->smem_len);
 		iounmap(par->v_regs);
 		release_mem_region(fix->mmio_start, fix->mmio_len);
 
 		pci_set_drvdata(dev, NULL);
+		kfree(info->pixmap.addr);
 		framebuffer_release(info);
 	}
 }
@@ -1168,21 +1510,78 @@ static struct pci_driver pm3fb_driver = {
 
 MODULE_DEVICE_TABLE(pci, pm3fb_id_table);
 
+#ifndef MODULE
+	/*
+	 *  Setup
+	 */
+
+/*
+ * Only necessary if your driver takes special options,
+ * otherwise we fall back on the generic fb_setup().
+ */
+static int __init pm3fb_setup(char *options)
+{
+	char *this_opt;
+
+	/* Parse user speficied options (`video=pm3fb:') */
+	if (!options || !*options)
+		return 0;
+
+	while ((this_opt = strsep(&options, ",")) != NULL) {
+		if (!*this_opt)
+			continue;
+		else if (!strncmp(this_opt, "noaccel", 7))
+			noaccel = 1;
+		else if (!strncmp(this_opt, "hwcursor=", 9))
+			hwcursor = simple_strtoul(this_opt + 9, NULL, 0);
+#ifdef CONFIG_MTRR
+		else if (!strncmp(this_opt, "nomtrr", 6))
+			nomtrr = 1;
+#endif
+		else
+			mode_option = this_opt;
+	}
+	return 0;
+}
+#endif /* MODULE */
+
 static int __init pm3fb_init(void)
 {
+	/*
+	 *  For kernel boot options (in 'video=pm3fb:<options>' format)
+	 */
 #ifndef MODULE
-	if (fb_get_options("pm3fb", NULL))
+	char *option = NULL;
+
+	if (fb_get_options("pm3fb", &option))
 		return -ENODEV;
+	pm3fb_setup(option);
 #endif
+
 	return pci_register_driver(&pm3fb_driver);
 }
 
+#ifdef MODULE
 static void __exit pm3fb_exit(void)
 {
 	pci_unregister_driver(&pm3fb_driver);
 }
 
-module_init(pm3fb_init);
 module_exit(pm3fb_exit);
+#endif
+module_init(pm3fb_init);
+
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "Initial video mode e.g. '648x480-8@60'");
+module_param(noaccel, bool, 0);
+MODULE_PARM_DESC(noaccel, "Disable acceleration");
+module_param(hwcursor, int, 0644);
+MODULE_PARM_DESC(hwcursor, "Enable hardware cursor "
+			"(1=enable, 0=disable, default=1)");
+#ifdef CONFIG_MTRR
+module_param(nomtrr, bool, 0);
+MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
+#endif
 
+MODULE_DESCRIPTION("Permedia3 framebuffer device driver");
 MODULE_LICENSE("GPL");