X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fvideo%2FKconfig;h=e0c5f96b273d150bbca242222b6aee9869d716ba;hb=a1716d508abf77e4bd02c275ab9293b9866929f3;hp=e3dc8f8d0c3ec082530c846d99cce79d8a6f1892;hpb=9d87dd97ffcd3b5eb2bbaf0d5d93f4bfcaed3f04;p=linux-2.6 diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index e3dc8f8d0c..e0c5f96b27 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -139,6 +139,30 @@ config FB_SYS_IMAGEBLIT blitting. This is used by drivers that don't provide their own (accelerated) version and the framebuffer is in system RAM. +menuconfig FB_FOREIGN_ENDIAN + bool "Framebuffer foreign endianness support" + depends on FB + ---help--- + This menu will let you enable support for the framebuffers with + non-native endianness (e.g. Little-Endian framebuffer on a + Big-Endian machine). Most probably you don't have such hardware, + so it's safe to say "n" here. + +choice + prompt "Choice endianness support" + depends on FB_FOREIGN_ENDIAN + +config FB_BOTH_ENDIAN + bool "Support for Big- and Little-Endian framebuffers" + +config FB_BIG_ENDIAN + bool "Support for Big-Endian framebuffers only" + +config FB_LITTLE_ENDIAN + bool "Support for Little-Endian framebuffers only" + +endchoice + config FB_SYS_FOPS tristate depends on FB @@ -147,7 +171,16 @@ config FB_SYS_FOPS config FB_DEFERRED_IO bool depends on FB - default y + +config FB_METRONOME + tristate + depends on FB + depends on FB_DEFERRED_IO + +config FB_HECUBA + tristate + depends on FB + depends on FB_DEFERRED_IO config FB_SVGALIB tristate @@ -546,7 +579,7 @@ config FB_VGA16 config FB_BF54X_LQ043 tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)" - depends on FB && (BF54x) + depends on FB && (BF54x) && !BF542 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -594,11 +627,9 @@ config FB_MAC select FB_CFB_IMAGEBLIT select FB_MACMODES -# bool ' Apple DAFB display support' CONFIG_FB_DAFB config FB_HP300 bool - depends on (FB = y) && HP300 - select FB_CFB_FILLRECT + depends on (FB = y) && DIO select FB_CFB_IMAGEBLIT default y @@ -674,20 +705,18 @@ config FB_IMAC help This is the frame buffer device driver for the Intel-based Macintosh -config FB_HECUBA - tristate "Hecuba board support" +config FB_N411 + tristate "N411 Apollo/Hecuba devkit support" depends on FB && X86 && MMU select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select FB_SYS_FOPS select FB_DEFERRED_IO + select FB_HECUBA help - This enables support for the Hecuba board. This driver was tested - with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO - interface (8 bit data, 4 bit control). If you anticipate using - this driver, say Y or M; otherwise say N. You must specify the - GPIO IO address to be used for setting control and data. + This enables support for the Apollo display controller in its + Hecuba form using the n411 devkit. config FB_HGA tristate "Hercules mono graphics support" @@ -1087,7 +1116,7 @@ config FB_CARILLO_RANCH This driver supports the LE80578 (Carillo Ranch) board config FB_INTEL - tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" + tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)" depends on FB && EXPERIMENTAL && PCI && X86 select AGP select AGP_INTEL @@ -1097,7 +1126,7 @@ config FB_INTEL select FB_CFB_IMAGEBLIT help This driver supports the on-board graphics built in to the Intel - 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets. + 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets. Say Y if you have and plan to use such a board. If you say Y here and want DDC/I2C support you must first say Y to @@ -1742,6 +1771,11 @@ config FB_PXA If unsure, say N. +config FB_PXA_SMARTPANEL + bool "PXA Smartpanel LCD support" + default n + depends on FB_PXA + config FB_PXA_PARAMETERS bool "PXA LCD command line parameters" default n @@ -1779,14 +1813,25 @@ config FB_MBX_DEBUG If unsure, say N. +config FB_FSL_DIU + tristate "Freescale DIU framebuffer support" + depends on FB && FSL_SOC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select PPC_LIB_RHEAP + ---help--- + Framebuffer driver for the Freescale SoC DIU + config FB_W100 tristate "W100 frame buffer support" - depends on FB && PXA_SHARPSL + depends on FB && ARCH_PXA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT ---help--- Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. + It can also drive the w3220 chip found on iPAQ hx4700. This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The @@ -1893,19 +1938,18 @@ config FB_XILINX framebuffer. ML300 carries a 640*480 LCD display on the board, ML403 uses a standard DB15 VGA connector. -config FB_METRONOME - tristate "Metronome display controller support" +config FB_AM200EPD + tristate "AM-200 E-Ink EPD devkit support" depends on FB && ARCH_PXA && MMU select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select FB_SYS_FOPS select FB_DEFERRED_IO + select FB_METRONOME help - This enables support for the Metronome display controller. Tested - with an E-Ink 800x600 display and Gumstix Connex through an AMLCD - interface. Please read - for more information. + This enables support for the Metronome display controller used on + the E-Ink AM-200 EPD devkit. config FB_VIRTUAL tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"