X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fvideo%2FKconfig;h=3e153d313bb01457cc54401925f78aad88da734c;hb=fe69102188cde0700cddd8d4cda0b77d68284884;hp=44b6ca290ce36bdcde56a22a8ec13b02e5fa8fd8;hpb=eedb9f09e92598c165de37a8c210434d270ca3a6;p=linux-2.6

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 44b6ca290c..3e153d313b 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -534,9 +534,15 @@ config FB_SUN3
 	bool "Sun3 framebuffer support"
 	depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
 
+config FB_SBUS
+	bool "SBUS and UPA framebuffers"
+	depends on (FB = y) && SPARC
+	help
+	  Say Y if you want support for SBUS or UPA based frame buffer device.
+
 config FB_BW2
 	bool "BWtwo support"
-	depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -545,7 +551,8 @@ config FB_BW2
 
 config FB_CG3
 	bool "CGthree support"
-	depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	help
@@ -553,7 +560,7 @@ config FB_CG3
 
 config FB_CG6
 	bool "CGsix (GX,TurboGX) support"
-	depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	help
@@ -593,38 +600,6 @@ config FB_EPSON1355
 	  framebuffer.  Product specs at
 	  <http://www.erd.epson.com/vdc/html/products.htm>.
 
-config FB_E1356
-	tristate "Epson SED1356 framebuffer support"
-	depends on FB && EXPERIMENTAL && PCI && MIPS
-
-config PB1000_CRT
-	bool "Use CRT on Pb1000 (J65)"
-	depends on MIPS_PB1000=y && FB_E1356
-
-config PB1000_NTSC
-	bool "Use Compsite NTSC on Pb1000 (J63)"
-	depends on MIPS_PB1000=y && FB_E1356
-
-config PB1000_TFT
-	bool "Use TFT Panel on Pb1000 (J64)"
-	depends on MIPS_PB1000=y && FB_E1356
-
-config PB1500_CRT
-	bool "Use CRT on Pb1500 " if MIPS_PB1500=y
-	depends on FB_E1356
-
-config PB1500_CRT
-	prompt "Use CRT on Pb1100 "
-	depends on FB_E1356 && MIPS_PB1100=y
-
-config PB1500_TFT
-	bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y
-	depends on FB_E1356
-
-config PB1500_TFT
-	prompt "Use TFT Panel on Pb1100 "
-	depends on FB_E1356 && MIPS_PB1100=y
-
 config FB_S1D13XXX
 	tristate "Epson S1D13XXX framebuffer support"
 	depends on FB
@@ -1018,12 +993,6 @@ config FB_ATY_GENERIC_LCD
 	  Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
 	  Rage XC, or Rage XL chipset.
 
-config FB_ATY_XL_INIT
-	bool "Rage XL No-BIOS Init support"
-	depends on FB_ATY_CT
-	help
-	  Say Y here to support booting a Rage XL without BIOS support.
-
 config FB_ATY_GX
 	bool "Mach64 GX support" if PCI
 	depends on FB_ATY
@@ -1176,7 +1145,7 @@ config FB_VOODOO1
 
 config FB_CYBLA
 	tristate "Cyberblade/i1 support"
-	depends on FB && PCI
+	depends on FB && PCI && X86_32 && !64BIT
 	select FB_CFB_IMAGEBLIT
 	select VIDEO_SELECT
 	---help---
@@ -1242,12 +1211,6 @@ config FB_AU1100
 
 source "drivers/video/geode/Kconfig"
 
-config FB_SBUS
-	bool "SBUS and UPA framebuffers"
-	depends on (FB = y) && (SPARC32 || SPARC64)
-	help
-	  Say Y if you want support for SBUS or UPA based frame buffer device.
-
 config FB_FFB
 	bool "Creator/Creator3D/Elite3D support"
 	depends on FB_SBUS && SPARC64
@@ -1299,7 +1262,7 @@ config FB_LEO
 
 config FB_PCI
 	bool "PCI framebuffers"
-	depends on (FB = y) && PCI && (SPARC64 || SPARC32)
+	depends on (FB = y) && PCI && SPARC
 
 config FB_IGA
 	bool "IGA 168x display support"
@@ -1407,7 +1370,7 @@ config FB_PXA
 
 	  This driver is also available as a module ( = code which can be
 	  inserted and removed from the running kernel whenever you want). The
-	  module will be called vfb. If you want to compile it as a module,
+	  module will be called pxafb. If you want to compile it as a module,
 	  say M here and read <file:Documentation/modules.txt>.
 
 	  If unsure, say N.
@@ -1440,7 +1403,7 @@ config FB_W100
 
 	  This driver is also available as a module ( = code which can be
 	  inserted and removed from the running kernel whenever you want). The
-	  module will be called vfb. If you want to compile it as a module,
+	  module will be called w100fb. If you want to compile it as a module,
 	  say M here and read <file:Documentation/modules.txt>.
 
 	  If unsure, say N.