X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fusb%2Fhost%2Fehci-fsl.c;h=01c3da34f678e4a52107f64bca1674bb7e64c807;hb=8725f25acc656c1522d48a6746055099efdaca4c;hp=adb0defa1631f0de75baaf6d1777119c1ba0d434;hpb=4f4ae0d42680889c62db4e1f3e6b4aa7787a7257;p=linux-2.6

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index adb0defa16..01c3da34f6 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -1,5 +1,4 @@
 /*
- * (C) Copyright David Brownell 2000-2002
  * Copyright (c) 2005 MontaVista Software
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -28,7 +27,6 @@
 /* FIXME: Power Management is un-ported so temporarily disable it */
 #undef CONFIG_PM
 
-/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
 
 /* configure so an HC device and id are always provided */
 /* always called with process context; sleeping is OK */
@@ -58,7 +56,7 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
 	if (!pdata) {
 		dev_err(&pdev->dev,
-			"No platform data for %s.\n", pdev->dev.bus_id);
+			"No platform data for %s.\n", dev_name(&pdev->dev));
 		return -ENODEV;
 	}
 
@@ -71,7 +69,7 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	      (pdata->operating_mode == FSL_USB2_DR_OTG))) {
 		dev_err(&pdev->dev,
 			"Non Host Mode configured for %s. Wrong driver linked.\n",
-			pdev->dev.bus_id);
+			dev_name(&pdev->dev));
 		return -ENODEV;
 	}
 
@@ -79,12 +77,12 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	if (!res) {
 		dev_err(&pdev->dev,
 			"Found HC with no IRQ. Check %s setup!\n",
-			pdev->dev.bus_id);
+			dev_name(&pdev->dev));
 		return -ENODEV;
 	}
 	irq = res->start;
 
-	hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id);
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
 	if (!hcd) {
 		retval = -ENOMEM;
 		goto err1;
@@ -94,7 +92,7 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	if (!res) {
 		dev_err(&pdev->dev,
 			"Found HC with no register addr. Check %s setup!\n",
-			pdev->dev.bus_id);
+			dev_name(&pdev->dev));
 		retval = -ENODEV;
 		goto err2;
 	}
@@ -134,7 +132,7 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver,
       err2:
 	usb_put_hcd(hcd);
       err1:
-	dev_err(&pdev->dev, "init %s fail, %d\n", pdev->dev.bus_id, retval);
+	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
 	return retval;
 }
 
@@ -232,8 +230,13 @@ static void mpc83xx_usb_setup(struct usb_hcd *hcd)
 
 	/* put controller in host mode. */
 	ehci_writel(ehci, 0x00000003, non_ehci + FSL_SOC_USB_USBMODE);
+#ifdef CONFIG_PPC_85xx
+	out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008);
+	out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000080);
+#else
 	out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
 	out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
+#endif
 	out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
 }
 
@@ -271,7 +274,7 @@ static int ehci_fsl_setup(struct usb_hcd *hcd)
 	if (retval)
 		return retval;
 
-	ehci->is_tdi_rh_tt = 1;
+	hcd->has_tt = 1;
 
 	ehci->sbrn = 0x20;
 
@@ -297,10 +300,6 @@ static const struct hc_driver ehci_fsl_hc_driver = {
 	 */
 	.reset = ehci_fsl_setup,
 	.start = ehci_run,
-#ifdef	CONFIG_PM
-	.suspend = ehci_bus_suspend,
-	.resume = ehci_bus_resume,
-#endif
 	.stop = ehci_stop,
 	.shutdown = ehci_shutdown,
 
@@ -324,6 +323,7 @@ static const struct hc_driver ehci_fsl_hc_driver = {
 	.bus_suspend = ehci_bus_suspend,
 	.bus_resume = ehci_bus_resume,
 	.relinquish_port = ehci_relinquish_port,
+	.port_handed_over = ehci_port_handed_over,
 };
 
 static int ehci_fsl_drv_probe(struct platform_device *pdev)
@@ -331,6 +331,7 @@ static int ehci_fsl_drv_probe(struct platform_device *pdev)
 	if (usb_disabled())
 		return -ENODEV;
 
+	/* FIXME we only want one one probe() not two */
 	return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
 }
 
@@ -338,12 +339,12 @@ static int ehci_fsl_drv_remove(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
+	/* FIXME we only want one one remove() not two */
 	usb_hcd_fsl_remove(hcd, pdev);
-
 	return 0;
 }
 
-MODULE_ALIAS("fsl-ehci");
+MODULE_ALIAS("platform:fsl-ehci");
 
 static struct platform_driver ehci_fsl_driver = {
 	.probe = ehci_fsl_drv_probe,
@@ -351,5 +352,5 @@ static struct platform_driver ehci_fsl_driver = {
 	.shutdown = usb_hcd_platform_shutdown,
 	.driver = {
 		   .name = "fsl-ehci",
-		   },
+	},
 };