X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fserial%2F8250_pnp.c;h=97c68d021d28bcb3ecd1cae57846cdac3fdaed7e;hb=7cd95f56cb61f5348d062527c9d3653196f6e629;hp=926f58a674a15043f64ff25095bade80efca17e9;hpb=fe537c0ee86b27fbe0690a7869815da80f492dbd;p=linux-2.6

diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 926f58a674..97c68d021d 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -69,6 +69,8 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{	"CTL3001",		0	},
 	/* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */
 	{	"CTL3011",		0	},
+	/* Davicom ISA 33.6K Modem */
+	{	"DAV0336",		0	},
 	/* Creative */
 	/* Creative Modem Blaster Flash56 DI5601-1 */
 	{	"DMB1032",		0	},
@@ -89,6 +91,8 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	/* Archtek America Corp. */
 	/* Archtek SmartLink Modem 3334BT Plug & Play */
 	{	"GVC000F",		0	},
+	/* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */
+	{	"GVC0303",		0	},
 	/* Hayes */
 	/* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */
 	{	"HAY0001",		0	},
@@ -345,6 +349,11 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	/* Fujitsu Wacom Tablet PC devices */
 	{	"FUJ02E5",		0	},
 	{	"FUJ02E6",		0	},
+	/*
+	 * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
+	 * disguise)
+	 */
+	{	"LTS0001",		0       },
 	/* Rockwell's (PORALiNK) 33600 INT PNP */
 	{	"WCI0003",		0	},
 	/* Unkown PnP modems */
@@ -407,8 +416,9 @@ static int __devinit check_resources(struct pnp_option *option)
  */
 static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags)
 {
-	if (!(check_name(pnp_dev_name(dev)) || (dev->card && check_name(dev->card->name))))
-		return -ENODEV;
+	if (!(check_name(pnp_dev_name(dev)) ||
+		(dev->card && check_name(dev->card->name))))
+			return -ENODEV;
 
 	if (check_resources(dev->independent))
 		return 0;
@@ -432,7 +442,8 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	}
 
 	memset(&port, 0, sizeof(struct uart_port));
-	port.irq = pnp_irq(dev, 0);
+	if (pnp_irq_valid(dev, 0))
+		port.irq = pnp_irq(dev, 0);
 	if (pnp_port_valid(dev, 0)) {
 		port.iobase = pnp_port_start(dev, 0);
 		port.iotype = UPIO_PORT;
@@ -444,8 +455,9 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 		return -ENODEV;
 
 #ifdef SERIAL_DEBUG_PNP
-	printk("Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
-	       port.iobase, port.mapbase, port.irq, port.iotype);
+	printk(KERN_DEBUG
+		"Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
+		       port.iobase, port.mapbase, port.irq, port.iotype);
 #endif
 
 	port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;