X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fserial%2F8250_pci.c;h=ceb03c9e749f8f918732d88c635de618d1f04125;hb=444ad82bc3eaa554be40d22dc248e58aeefd54d9;hp=5e485876f54c740004457ee0f4bbb5a020e9c50d;hpb=d6dd9e93c7531fa31370e27d053a3940d8d662fb;p=linux-2.6

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 5e485876f5..ceb03c9e74 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -580,6 +580,138 @@ static int pci_netmos_init(struct pci_dev *dev)
 	return num_serial;
 }
 
+/*
+ * ITE support by Niels de Vos <niels.devos@wincor-nixdorf.com>
+ *
+ * These chips are available with optionally one parallel port and up to
+ * two serial ports. Unfortunately they all have the same product id.
+ *
+ * Basic configuration is done over a region of 32 I/O ports. The base
+ * ioport is called INTA or INTC, depending on docs/other drivers.
+ *
+ * The region of the 32 I/O ports is configured in POSIO0R...
+ */
+
+/* registers */
+#define ITE_887x_MISCR		0x9c
+#define ITE_887x_INTCBAR	0x78
+#define ITE_887x_UARTBAR	0x7c
+#define ITE_887x_PS0BAR		0x10
+#define ITE_887x_POSIO0		0x60
+
+/* I/O space size */
+#define ITE_887x_IOSIZE		32
+/* I/O space size (bits 26-24; 8 bytes = 011b) */
+#define ITE_887x_POSIO_IOSIZE_8		(3 << 24)
+/* I/O space size (bits 26-24; 32 bytes = 101b) */
+#define ITE_887x_POSIO_IOSIZE_32	(5 << 24)
+/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */
+#define ITE_887x_POSIO_SPEED		(3 << 29)
+/* enable IO_Space bit */
+#define ITE_887x_POSIO_ENABLE		(1 << 31)
+
+static int pci_ite887x_init(struct pci_dev *dev)
+{
+	/* inta_addr are the configuration addresses of the ITE */
+	static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0,
+							0x200, 0x280, 0 };
+	int ret, i, type;
+	struct resource *iobase = NULL;
+	u32 miscr, uartbar, ioport;
+
+	/* search for the base-ioport */
+	i = 0;
+	while (inta_addr[i] && iobase == NULL) {
+		iobase = request_region(inta_addr[i], ITE_887x_IOSIZE,
+								"ite887x");
+		if (iobase != NULL) {
+			/* write POSIO0R - speed | size | ioport */
+			pci_write_config_dword(dev, ITE_887x_POSIO0,
+				ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
+				ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
+			/* write INTCBAR - ioport */
+			pci_write_config_dword(dev, ITE_887x_INTCBAR, inta_addr[i]);
+			ret = inb(inta_addr[i]);
+			if (ret != 0xff) {
+				/* ioport connected */
+				break;
+			}
+			release_region(iobase->start, ITE_887x_IOSIZE);
+			iobase = NULL;
+		}
+		i++;
+	}
+
+	if (!inta_addr[i]) {
+		printk(KERN_ERR "ite887x: could not find iobase\n");
+		return -ENODEV;
+	}
+
+	/* start of undocumented type checking (see parport_pc.c) */
+	type = inb(iobase->start + 0x18) & 0x0f;
+
+	switch (type) {
+	case 0x2:	/* ITE8871 (1P) */
+	case 0xa:	/* ITE8875 (1P) */
+		ret = 0;
+		break;
+	case 0xe:	/* ITE8872 (2S1P) */
+		ret = 2;
+		break;
+	case 0x6:	/* ITE8873 (1S) */
+		ret = 1;
+		break;
+	case 0x8:	/* ITE8874 (2S) */
+		ret = 2;
+		break;
+	default:
+		moan_device("Unknown ITE887x", dev);
+		ret = -ENODEV;
+	}
+
+	/* configure all serial ports */
+	for (i = 0; i < ret; i++) {
+		/* read the I/O port from the device */
+		pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)),
+								&ioport);
+		ioport &= 0x0000FF00;	/* the actual base address */
+		pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)),
+			ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
+			ITE_887x_POSIO_IOSIZE_8 | ioport);
+
+		/* write the ioport to the UARTBAR */
+		pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar);
+		uartbar &= ~(0xffff << (16 * i));	/* clear half the reg */
+		uartbar |= (ioport << (16 * i));	/* set the ioport */
+		pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar);
+
+		/* get current config */
+		pci_read_config_dword(dev, ITE_887x_MISCR, &miscr);
+		/* disable interrupts (UARTx_Routing[3:0]) */
+		miscr &= ~(0xf << (12 - 4 * i));
+		/* activate the UART (UARTx_En) */
+		miscr |= 1 << (23 - i);
+		/* write new config with activated UART */
+		pci_write_config_dword(dev, ITE_887x_MISCR, miscr);
+	}
+
+	if (ret <= 0) {
+		/* the device has no UARTs if we get here */
+		release_region(iobase->start, ITE_887x_IOSIZE);
+	}
+
+	return ret;
+}
+
+static void __devexit pci_ite887x_exit(struct pci_dev *dev)
+{
+	u32 ioport;
+	/* the ioport is bit 0-15 in POSIO0R */
+	pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport);
+	ioport &= 0xffff;
+	release_region(ioport, ITE_887x_IOSIZE);
+}
+
 static int
 pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
 		  struct uart_port *port, int idx)
@@ -652,6 +784,18 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
 		.init		= pci_inteli960ni_init,
 		.setup		= pci_default_setup,
 	},
+	/*
+	 * ITE
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_ITE,
+		.device		= PCI_DEVICE_ID_ITE_8872,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ite887x_init,
+		.setup		= pci_default_setup,
+		.exit		= __devexit_p(pci_ite887x_exit),
+	},
 	/*
 	 * Panacom
 	 */
@@ -892,6 +1036,7 @@ enum pci_board_num_t {
 	pbn_b0_2_115200,
 	pbn_b0_4_115200,
 	pbn_b0_5_115200,
+	pbn_b0_8_115200,
 
 	pbn_b0_1_921600,
 	pbn_b0_2_921600,
@@ -933,6 +1078,7 @@ enum pci_board_num_t {
 
 	pbn_b1_2_1250000,
 
+	pbn_b1_bt_1_115200,
 	pbn_b1_bt_2_921600,
 
 	pbn_b1_1_1382400,
@@ -983,6 +1129,7 @@ enum pci_board_num_t {
 	pbn_exar_XR17C152,
 	pbn_exar_XR17C154,
 	pbn_exar_XR17C158,
+	pbn_pasemi_1682M,
 };
 
 /*
@@ -1026,6 +1173,12 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.base_baud	= 115200,
 		.uart_offset	= 8,
 	},
+	[pbn_b0_8_115200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
 
 	[pbn_b0_1_921600] = {
 		.flags		= FL_BASE0,
@@ -1211,6 +1364,13 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.uart_offset	= 8,
 	},
 
+	[pbn_b1_bt_1_115200] = {
+		.flags		= FL_BASE1|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+
 	[pbn_b1_bt_2_921600] = {
 		.flags		= FL_BASE1|FL_BASE_BARS,
 		.num_ports	= 2,
@@ -1498,6 +1658,18 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.base_baud	= 921600,
 		.uart_offset	= 0x200,
 	},
+	/*
+	 * PA Semi PWRficient PA6T-1682M on-chip UART
+	 */
+	[pbn_pasemi_1682M] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 8333333,
+	},
+};
+
+static const struct pci_device_id softmodem_blacklist[] = {
+	{ PCI_VDEVICE ( AL, 0x5457 ), }, /* ALi Corporation M5457 AC'97 Modem */
 };
 
 /*
@@ -1508,6 +1680,7 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 static int __devinit
 serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
 {
+	const struct pci_device_id *blacklist;
 	int num_iomem, num_port, first_port = -1, i;
 	
 	/*
@@ -1522,6 +1695,18 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
 	    (dev->class & 0xff) > 6)
 		return -ENODEV;
 
+	/*
+	 * Do not access blacklisted devices that are known not to
+	 * feature serial ports.
+	 */
+	for (blacklist = softmodem_blacklist;
+	     blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist);
+	     blacklist++) {
+		if (dev->vendor == blacklist->vendor &&
+		    dev->device == blacklist->device)
+			return -ENODEV;
+	}
+
 	num_iomem = num_port = 0;
 	for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
 		if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
@@ -1801,6 +1986,7 @@ static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
 
 static int pciserial_resume_one(struct pci_dev *dev)
 {
+	int err;
 	struct serial_private *priv = pci_get_drvdata(dev);
 
 	pci_set_power_state(dev, PCI_D0);
@@ -1810,7 +1996,9 @@ static int pciserial_resume_one(struct pci_dev *dev)
 		/*
 		 * The device may have been disabled.  Re-enable it.
 		 */
-		pci_enable_device(dev);
+		err = pci_enable_device(dev);
+		if (err)
+			return err;
 
 		pciserial_resume_ports(priv);
 	}
@@ -2364,6 +2552,13 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_1_115200 },
+	/*
+	 * ITE
+	 */
+	{	PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b1_bt_1_115200 },
 
 	/*
 	 * IntaShield IS-200
@@ -2381,6 +2576,126 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
 		PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
 		0, 0, pbn_b2_8_921600 },
+
+	/*
+	 * Mainpine series cards: Fairly standard layout but fools
+	 * parts of the autodetect in some cases and uses otherwise
+	 * unmatched communications subclasses in the PCI Express case
+	 */
+
+	{	/* RockForceDUO */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0200,
+		0, 0, pbn_b0_2_115200 },
+	{	/* RockForceQUATRO */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0300,
+		0, 0, pbn_b0_4_115200 },
+	{	/* RockForceDUO+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0400,
+		0, 0, pbn_b0_2_115200 },
+	{	/* RockForceQUATRO+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0500,
+		0, 0, pbn_b0_4_115200 },
+	{	/* RockForce+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0600,
+		0, 0, pbn_b0_2_115200 },
+	{	/* RockForce+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0700,
+		0, 0, pbn_b0_4_115200 },
+	{	/* RockForceOCTO+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0800,
+		0, 0, pbn_b0_8_115200 },
+	{	/* RockForceDUO+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0C00,
+		0, 0, pbn_b0_2_115200 },
+	{	/* RockForceQUARTRO+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x0D00,
+		0, 0, pbn_b0_4_115200 },
+	{	/* RockForceOCTO+ */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x1D00,
+		0, 0, pbn_b0_8_115200 },
+	{	/* RockForceD1 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2000,
+		0, 0, pbn_b0_1_115200 },
+	{	/* RockForceF1 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2100,
+		0, 0, pbn_b0_1_115200 },
+	{	/* RockForceD2 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2200,
+		0, 0, pbn_b0_2_115200 },
+	{	/* RockForceF2 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2300,
+		0, 0, pbn_b0_2_115200 },
+	{	/* RockForceD4 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2400,
+		0, 0, pbn_b0_4_115200 },
+	{	/* RockForceF4 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2500,
+		0, 0, pbn_b0_4_115200 },
+	{	/* RockForceD8 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2600,
+		0, 0, pbn_b0_8_115200 },
+	{	/* RockForceF8 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x2700,
+		0, 0, pbn_b0_8_115200 },
+	{	/* IQ Express D1 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3000,
+		0, 0, pbn_b0_1_115200 },
+	{	/* IQ Express F1 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3100,
+		0, 0, pbn_b0_1_115200 },
+	{	/* IQ Express D2 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3200,
+		0, 0, pbn_b0_2_115200 },
+	{	/* IQ Express F2 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3300,
+		0, 0, pbn_b0_2_115200 },
+	{	/* IQ Express D4 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3400,
+		0, 0, pbn_b0_4_115200 },
+	{	/* IQ Express F4 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3500,
+		0, 0, pbn_b0_4_115200 },
+	{	/* IQ Express D8 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3C00,
+		0, 0, pbn_b0_8_115200 },
+	{	/* IQ Express F8 */
+		PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
+		PCI_VENDOR_ID_MAINPINE, 0x3D00,
+		0, 0, pbn_b0_8_115200 },
+
+
+	/*
+	 * PA Semi PA6T-1682M on-chip UART
+	 */
+	{	PCI_VENDOR_ID_PASEMI, 0xa004,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pasemi_1682M },
+
 	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL