X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fserial%2F8250_pci.c;h=07f05e9d0955eb12ae58705a09ffa4d20b05531d;hb=5a90fa71f6d45054c78b2bd6dbc4feba1638e1d2;hp=de54bdc5398b96b6c44b01c881c91a5a1010a296;hpb=13e652800d1644dfedcd0d59ac95ef0beb7f3165;p=linux-2.6

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index de54bdc539..07f05e9d09 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -389,6 +389,9 @@ static void __devexit sbs_exit(struct pci_dev *dev)
  *     - 10x cards have control registers in IO and/or memory space;
  *     - 20x cards have control registers in standard PCI configuration space.
  *
+ * There are also Quartet Serial cards which use Oxford Semiconductor
+ * 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
+ *
  * Note: some SIIG cards are probed by the parport_serial object.
  */
 
@@ -1026,6 +1029,10 @@ enum pci_board_num_t {
 	pbn_b0_2_921600,
 	pbn_b0_4_921600,
 
+	pbn_b0_2_1130000,
+
+	pbn_b0_4_1152000,
+
 	pbn_b0_bt_1_115200,
 	pbn_b0_bt_2_115200,
 	pbn_b0_bt_8_115200,
@@ -1159,6 +1166,20 @@ static struct pci_board pci_boards[] __devinitdata = {
 		.uart_offset	= 8,
 	},
 
+	[pbn_b0_2_1130000] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 2,
+		.base_baud      = 1130000,
+		.uart_offset    = 8,
+	},
+
+	[pbn_b0_4_1152000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 1152000,
+		.uart_offset	= 8,
+	},
+
 	[pbn_b0_bt_1_115200] = {
 		.flags		= FL_BASE0|FL_BASE_BARS,
 		.num_ports	= 1,
@@ -1755,33 +1776,30 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 static void __devexit pciserial_remove_one(struct pci_dev *dev)
 {
 	struct serial_private *priv = pci_get_drvdata(dev);
+	struct pci_serial_quirk *quirk;
+	int i;
 
 	pci_set_drvdata(dev, NULL);
 
-	if (priv) {
-		struct pci_serial_quirk *quirk;
-		int i;
-
-		for (i = 0; i < priv->nr; i++)
-			serial8250_unregister_port(priv->line[i]);
+	for (i = 0; i < priv->nr; i++)
+		serial8250_unregister_port(priv->line[i]);
 
-		for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
-			if (priv->remapped_bar[i])
-				iounmap(priv->remapped_bar[i]);
-			priv->remapped_bar[i] = NULL;
-		}
+	for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+		if (priv->remapped_bar[i])
+			iounmap(priv->remapped_bar[i]);
+		priv->remapped_bar[i] = NULL;
+	}
 
-		/*
-		 * Find the exit quirks.
-		 */
-		quirk = find_quirk(dev);
-		if (quirk->exit)
-			quirk->exit(dev);
+	/*
+	 * Find the exit quirks.
+	 */
+	quirk = find_quirk(dev);
+	if (quirk->exit)
+		quirk->exit(dev);
 
-		pci_disable_device(dev);
+	pci_disable_device(dev);
 
-		kfree(priv);
-	}
+	kfree(priv);
 }
 
 static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
@@ -1977,6 +1995,19 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
 		PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0,
 		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+		PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0,
+		pbn_b0_4_1152000 },
+
+		/*
+		 * The below card is a little controversial since it is the
+		 * subject of a PCI vendor/device ID clash.  (See
+		 * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
+		 * For now just used the hex ID 0x950a.
+		 */
+	{	PCI_VENDOR_ID_OXSEMI, 0x950a,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_2_1130000 },
 	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_4_115200 },