X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fserial%2F68328serial.c;h=aad4012bbb30510a66c2f7983f07473a9885f5d4;hb=8087ebd5a121ac6bf5a8eba2459c01d3659c3e31;hp=993a702422ec6e2e22175ea67e6c9bacb55ab093;hpb=93fdf10d4c28edaa1b9f80e7f9c3002359186d00;p=linux-2.6

diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index 993a702422..aad4012bbb 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -33,7 +33,6 @@
 #include <linux/keyboard.h>
 #include <linux/init.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
 
@@ -275,8 +274,7 @@ static void status_handle(struct m68k_serial *info, unsigned short status)
 	return;
 }
 
-static void receive_chars(struct m68k_serial *info, struct pt_regs *regs,
-			  unsigned short rx)
+static void receive_chars(struct m68k_serial *info, unsigned short rx)
 {
 	struct tty_struct *tty = info->tty;
 	m68328_uart *uart = &uart_addr[info->line];
@@ -377,7 +375,7 @@ clear_and_return:
 /*
  * This is the serial driver's generic interrupt routine
  */
-irqreturn_t rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+irqreturn_t rs_interrupt(int irq, void *dev_id)
 {
 	struct m68k_serial * info;
 	m68328_uart *uart;
@@ -394,17 +392,17 @@ irqreturn_t rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
 #ifdef USE_INTS
 	tx = uart->utx.w;
 
-	if (rx & URX_DATA_READY) receive_chars(info, regs, rx);
+	if (rx & URX_DATA_READY) receive_chars(info, rx);
 	if (tx & UTX_TX_AVAIL)   transmit_chars(info);
 #else
-	receive_chars(info, regs, rx);		
+	receive_chars(info, rx);		
 #endif
 	return IRQ_HANDLED;
 }
 
-static void do_softint(void *private)
+static void do_softint(struct work_struct *work)
 {
-	struct m68k_serial	*info = (struct m68k_serial *) private;
+	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue);
 	struct tty_struct	*tty;
 	
 	tty = info->tty;
@@ -426,9 +424,9 @@ static void do_softint(void *private)
  * 	do_serial_hangup() -> tty->hangup() -> rs_hangup()
  * 
  */
-static void do_serial_hangup(void *private)
+static void do_serial_hangup(struct work_struct *work)
 {
-	struct m68k_serial	*info = (struct m68k_serial *) private;
+	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue_hangup);
 	struct tty_struct	*tty;
 	
 	tty = info->tty;
@@ -1062,7 +1060,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 	return 0;
 }
 
-static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
 	struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
 
@@ -1325,60 +1323,7 @@ static void show_serial_version(void)
 	printk("MC68328 serial driver version 1.00\n");
 }
 
-#ifdef CONFIG_PM_LEGACY
-/* Serial Power management
- *  The console (currently fixed at line 0) is a special case for power
- *  management because the kernel is so chatty. The console will be 
- *  explicitly disabled my our power manager as the last minute, so we won't
- *  mess with it here.
- */
-static struct pm_dev *serial_pm[NR_PORTS];
-
-static int serial_pm_callback(struct pm_dev *dev, pm_request_t request, void *data)
-{
-	struct m68k_serial *info = (struct m68k_serial *)dev->data;
-
-	if(info == NULL)
-		return -1;
-
-	/* special case for line 0 - pm restores it */
-	if(info->line == 0)
-		return 0; 
-
-	switch (request) {
-	case PM_SUSPEND:
-		shutdown(info);
-		break;
-
-	case PM_RESUME:
-		startup(info);
-		break;
-	}
-	return 0;
-}
-
-void shutdown_console(void)
-{
-	struct m68k_serial *info = &m68k_soft[0];
-
-	/* HACK: wait a bit for any pending printk's to be dumped */
-	{
-		int i = 10000;
-		while(i--);
-	}
-
-	shutdown(info);
-}
-
-void startup_console(void)
-{
-	struct m68k_serial *info = &m68k_soft[0];
-	startup(info);
-}
-#endif /* CONFIG_PM_LEGACY */
-
-
-static struct tty_operations rs_ops = {
+static const struct tty_operations rs_ops = {
 	.open = rs_open,
 	.close = rs_close,
 	.write = rs_write,
@@ -1445,8 +1390,8 @@ rs68328_init(void)
 	    info->event = 0;
 	    info->count = 0;
 	    info->blocked_open = 0;
-	    INIT_WORK(&info->tqueue, do_softint, info);
-	    INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info);
+	    INIT_WORK(&info->tqueue, do_softint);
+	    INIT_WORK(&info->tqueue_hangup, do_serial_hangup);
 	    init_waitqueue_head(&info->open_wait);
 	    init_waitqueue_head(&info->close_wait);
 	    info->line = i;
@@ -1468,11 +1413,6 @@ rs68328_init(void)
 			    IRQ_FLG_STD,
 			    "M68328_UART", NULL))
                 panic("Unable to attach 68328 serial interrupt\n");
-#ifdef CONFIG_PM_LEGACY
-	    serial_pm[i] = pm_register(PM_SYS_DEV, PM_SYS_COM, serial_pm_callback);
-	    if (serial_pm[i])
-		    serial_pm[i]->data = info;
-#endif
 	}
 	local_irq_restore(flags);
 	return 0;