X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fscsi%2Fsata_vsc.c;h=4c69a705a4830834b8f6006a6f706c166c91943a;hb=b7887196e38da54ff893897b80875d632d1a1114;hp=0372be7ff1c924fc5b66a17aa8ab073325c72b34;hpb=26e27cd424554202d36f38ee35421143788da127;p=linux-2.6

diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 0372be7ff1..4c69a705a4 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -47,7 +47,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_vsc"
-#define DRV_VERSION	"1.2"
+#define DRV_VERSION	"2.0"
 
 enum {
 	/* Interrupt register offsets (from chip base address) */
@@ -279,6 +279,7 @@ static struct scsi_host_template vsc_sata_sht = {
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
 };
 
@@ -290,14 +291,17 @@ static const struct ata_port_operations vsc_sata_ops = {
 	.exec_command		= ata_exec_command,
 	.check_status		= ata_check_status,
 	.dev_select		= ata_std_dev_select,
-	.phy_reset		= sata_phy_reset,
 	.bmdma_setup            = ata_bmdma_setup,
 	.bmdma_start            = ata_bmdma_start,
 	.bmdma_stop		= ata_bmdma_stop,
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
-	.eng_timeout		= ata_eng_timeout,
+	.data_xfer		= ata_mmio_data_xfer,
+	.freeze			= ata_bmdma_freeze,
+	.thaw			= ata_bmdma_thaw,
+	.error_handler		= ata_bmdma_error_handler,
+	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.irq_handler		= vsc_sata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= vsc_sata_scr_read,
@@ -392,11 +396,11 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 
 	probe_ent->sht = &vsc_sata_sht;
 	probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO | ATA_FLAG_SATA_RESET;
+				ATA_FLAG_MMIO;
 	probe_ent->port_ops = &vsc_sata_ops;
 	probe_ent->n_ports = 4;
 	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = SA_SHIRQ;
+	probe_ent->irq_flags = IRQF_SHARED;
 	probe_ent->mmio_base = mmio_base;
 
 	/* We don't care much about the PIO/UDMA masks, but the core won't like us
@@ -439,15 +443,12 @@ err_out:
 }
 
 
-/*
- * 0x1725/0x7174 is the Vitesse VSC-7174
- * 0x8086/0x3200 is the Intel 31244, which is supposed to be identical
- * compatibility is untested as of yet
- */
 static const struct pci_device_id vsc_sata_pci_tbl[] = {
-	{ 0x1725, 0x7174, PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
-	{ 0x8086, 0x3200, PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
-	{ }
+	{ PCI_VENDOR_ID_VITESSE, 0x7174,
+	  PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
+	{ PCI_VENDOR_ID_INTEL, 0x3200,
+	  PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
+	{ }	/* terminate list */
 };
 
 
@@ -461,7 +462,7 @@ static struct pci_driver vsc_sata_pci_driver = {
 
 static int __init vsc_sata_init(void)
 {
-	return pci_module_init(&vsc_sata_pci_driver);
+	return pci_register_driver(&vsc_sata_pci_driver);
 }