X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fscsi%2Fsata_svw.c;h=c94b870cf378af39df82966e20b59b04876fe395;hb=d7a80dad2fe19a2b8c119c8e9cba605474a75a2b;hp=53b0d5c0a61f45b4c25f78326c7aad38ff441c42;hpb=7b7e394185014e0f3bd8989cac937003f20ef9ce;p=linux-2.6

diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index 53b0d5c0a6..c94b870cf3 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -54,7 +54,7 @@
 #endif /* CONFIG_PPC_OF */
 
 #define DRV_NAME	"sata_svw"
-#define DRV_VERSION	"1.07"
+#define DRV_VERSION	"1.8"
 
 enum {
 	/* Taskfile registers offsets */
@@ -257,7 +257,7 @@ static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start,
 	int len, index;
 
 	/* Find  the ata_port */
-	ap = (struct ata_port *) &shost->hostdata[0];
+	ap = ata_shost_to_port(shost);
 	if (ap == NULL)
 		return 0;
 
@@ -299,6 +299,7 @@ static struct scsi_host_template k2_sata_sht = {
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
 #ifdef CONFIG_PPC_OF
 	.proc_info		= k2_sata_proc_info,
 #endif
@@ -313,14 +314,17 @@ static const struct ata_port_operations k2_sata_ops = {
 	.check_status		= k2_stat_check_status,
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
-	.phy_reset		= sata_phy_reset,
 	.bmdma_setup		= k2_bmdma_setup_mmio,
 	.bmdma_start		= k2_bmdma_start_mmio,
 	.bmdma_stop		= ata_bmdma_stop,
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
-	.eng_timeout		= ata_eng_timeout,
+	.data_xfer		= ata_mmio_data_xfer,
+	.freeze			= ata_bmdma_freeze,
+	.thaw			= ata_bmdma_thaw,
+	.error_handler		= ata_bmdma_error_handler,
+	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= k2_sata_scr_read,
@@ -420,8 +424,8 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
 
 	probe_ent->sht = &k2_sata_sht;
-	probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET |
-				ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
+	probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				ATA_FLAG_MMIO;
 	probe_ent->port_ops = &k2_sata_ops;
 	probe_ent->n_ports = 4;
 	probe_ent->irq = pdev->irq;