X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fscsi%2Fsata_sil.c;h=b017f85e6d6a12598436f2b5279ce734ccee0597;hb=4837c672fd4d43c519d6b53308ee68d45b91b872;hp=49ed557a4b661e4cfa9569b0d2af72f4375573d8;hpb=5696c1944a33b4434a9a1ebb6383b906afd43a10;p=linux-2.6 diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 49ed557a4b..b017f85e6d 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -5,24 +5,32 @@ * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * - * Copyright 2003 Red Hat, Inc. + * Copyright 2003-2005 Red Hat, Inc. * Copyright 2003 Benjamin Herrenschmidt * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Documentation for SiI 3112: + * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 + * + * Other errata and documentation available under NDA. * */ @@ -33,7 +41,7 @@ #include #include #include -#include "scsi.h" +#include #include #include @@ -41,8 +49,11 @@ #define DRV_VERSION "0.9" enum { + SIL_FLAG_MOD15WRITE = (1 << 30), + sil_3112 = 0, - sil_3114 = 1, + sil_3112_m15w = 1, + sil_3114 = 2, SIL_FIFO_R0 = 0x40, SIL_FIFO_W0 = 0x41, @@ -75,14 +86,15 @@ static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static void sil_post_set_mode (struct ata_port *ap); -static struct pci_device_id sil_pci_tbl[] = { - { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + +static const struct pci_device_id sil_pci_tbl[] = { + { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, - { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, { } /* terminate list */ }; @@ -118,7 +130,7 @@ static struct pci_driver sil_pci_driver = { .remove = ata_pci_remove_one, }; -static Scsi_Host_Template sil_sht = { +static struct scsi_host_template sil_sht = { .module = THIS_MODULE, .name = DRV_NAME, .ioctl = ata_scsi_ioctl, @@ -135,10 +147,9 @@ static Scsi_Host_Template sil_sht = { .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, .bios_param = ata_std_bios_param, - .ordered_flush = 1, }; -static struct ata_port_operations sil_ops = { +static const struct ata_port_operations sil_ops = { .port_disable = ata_port_disable, .dev_config = sil_dev_config, .tf_load = ata_tf_load, @@ -161,10 +172,10 @@ static struct ata_port_operations sil_ops = { .scr_write = sil_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, - .host_stop = ata_host_stop, + .host_stop = ata_pci_host_stop, }; -static struct ata_port_info sil_port_info[] = { +static const struct ata_port_info sil_port_info[] = { /* sil_3112 */ { .sht = &sil_sht, @@ -174,6 +185,16 @@ static struct ata_port_info sil_port_info[] = { .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ .port_ops = &sil_ops, + }, /* sil_3112_15w - keep it sync'd w/ sil_3112 */ + { + .sht = &sil_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SRST | ATA_FLAG_MMIO | + SIL_FLAG_MOD15WRITE, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil_ops, }, /* sil_3114 */ { .sht = &sil_sht, @@ -210,6 +231,7 @@ MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, sil_pci_tbl); MODULE_VERSION(DRV_VERSION); + static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) { u8 cache_line = 0; @@ -221,7 +243,8 @@ static void sil_post_set_mode (struct ata_port *ap) { struct ata_host_set *host_set = ap->host_set; struct ata_device *dev; - void *addr = host_set->mmio_base + sil_port[ap->port_no].xfer_mode; + void __iomem *addr = + host_set->mmio_base + sil_port[ap->port_no].xfer_mode; u32 tmp, dev_mode[2]; unsigned int i; @@ -265,7 +288,7 @@ static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_re static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) { - void *mmio = (void *) sil_scr_addr(ap, sc_reg); + void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); if (mmio) return readl(mmio); return 0xffffffffU; @@ -273,7 +296,7 @@ static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) { - void *mmio = (void *) sil_scr_addr(ap, sc_reg); + void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); if (mmio) writel(val, mmio); } @@ -323,15 +346,15 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) while ((len > 0) && (s[len - 1] == ' ')) len--; - for (n = 0; sil_blacklist[n].product; n++) + for (n = 0; sil_blacklist[n].product; n++) if (!memcmp(sil_blacklist[n].product, s, strlen(sil_blacklist[n].product))) { quirks = sil_blacklist[n].quirk; break; } - + /* limit requests to 15 sectors */ - if (quirks & SIL_QUIRK_MOD15WRITE) { + if ((ap->flags & SIL_FLAG_MOD15WRITE) && (quirks & SIL_QUIRK_MOD15WRITE)) { printk(KERN_INFO "ata%u(%u): applying Seagate errata fix\n", ap->id, dev->devno); ap->host->max_sectors = 15; @@ -354,7 +377,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static int printed_version; struct ata_probe_ent *probe_ent = NULL; unsigned long base; - void *mmio_base; + void __iomem *mmio_base; int rc; unsigned int i; int pci_dev_busy = 0; @@ -362,7 +385,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) u8 cls; if (!printed_version++) - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); /* * If this driver happens to only be useful on Apple's K2, then @@ -404,8 +427,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->irq_flags = SA_SHIRQ; probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags; - mmio_base = ioremap(pci_resource_start(pdev, 5), - pci_resource_len(pdev, 5)); + mmio_base = pci_iomap(pdev, 5, 0); if (mmio_base == NULL) { rc = -ENOMEM; goto err_out_free_ent; @@ -440,8 +462,8 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) writeb(cls, mmio_base + SIL_FIFO_W3); } } else - printk(KERN_WARNING DRV_NAME "(%s): cache line size not set. Driver may not function\n", - pci_name(pdev)); + dev_printk(KERN_WARNING, &pdev->dev, + "cache line size not set. Driver may not function\n"); if (ent->driver_data == sil_3114) { irq_mask = SIL_MASK_4PORT;