X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fscsi%2Fqla1280.c;h=51e2f299dbbb11e60b0995ac4e5cca14c5a2c634;hb=5cf11daf9abdfd7bf5f5893137155cb38ccbdeb8;hp=c94906abfee353137b4483dbcfcc2346cc4aeab9;hpb=9b73e76f3cf63379dcf45fcd4f112f5812418d0a;p=linux-2.6

diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index c94906abfe..51e2f299db 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -333,7 +333,6 @@
 
 #include <linux/module.h>
 
-#include <linux/version.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/errno.h>
@@ -367,10 +366,6 @@
 #include <asm/sn/io.h>
 #endif
 
-#if LINUX_VERSION_CODE < 0x020600
-#error "Kernels older than 2.6.0 are no longer supported"
-#endif
-
 
 /*
  * Compile time Options:
@@ -2012,7 +2007,7 @@ qla1280_set_defaults(struct scsi_qla_host *ha)
 		nv->bus[bus].config_2.req_ack_active_negation = 1;
 		nv->bus[bus].config_2.data_line_active_negation = 1;
 		nv->bus[bus].selection_timeout = 250;
-		nv->bus[bus].max_queue_depth = 256;
+		nv->bus[bus].max_queue_depth = 32;
 
 		if (IS_ISP1040(ha)) {
 			nv->bus[bus].bus_reset_delay = 3;
@@ -2056,7 +2051,7 @@ qla1280_config_target(struct scsi_qla_host *ha, int bus, int target)
 	status = qla1280_mailbox_command(ha, 0x0f, mb);
 
 	/* Save Tag queuing enable flag. */
-	flag = (BIT_0 << target) & mb[0];
+	flag = (BIT_0 << target);
 	if (nv->bus[bus].target[target].parameter.tag_queuing)
 		ha->bus_settings[bus].qtag_enables |= flag;
 
@@ -2863,7 +2858,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 
 	/* Load SCSI command packet. */
 	pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
-	memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
+	memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));
 	/* dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
 
 	/* Set transfer direction. */
@@ -3132,7 +3127,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 
 	/* Load SCSI command packet. */
 	pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
-	memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
+	memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));
 
 	/*dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
 	/* Set transfer direction. */
@@ -4204,7 +4199,6 @@ static struct scsi_host_template qla1280_driver_template = {
 	.sg_tablesize		= SG_ALL,
 	.cmd_per_lun		= 1,
 	.use_clustering		= ENABLE_CLUSTERING,
-	.use_sg_chaining	= ENABLE_SG_CHAINING,
 };