X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fscsi%2Fmac_scsi.c;h=abe2bda6ac37c8298ea84203a830a220f38a68f7;hb=fe537c0ee86b27fbe0690a7869815da80f492dbd;hp=92d2c8379abf529989afd58f10976aedb901d325;hpb=3357d4c75f1fb67e7304998c4ad4e9a9fed66fa4;p=linux-2.6

diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index 92d2c8379a..abe2bda6ac 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -36,7 +36,6 @@
 
 #include <linux/module.h>
 #include <linux/signal.h>
-#include <linux/sched.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/blkdev.h>
@@ -54,6 +53,11 @@
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include "mac_scsi.h"
+
+/* These control the behaviour of the generic 5380 core */
+#define AUTOSENSE
+#define PSEUDO_DMA
+
 #include "NCR5380.h"
 
 #if 0
@@ -65,9 +69,6 @@
 #define RESET_BOOT
 #define DRIVER_SETUP
 
-#define	ENABLE_IRQ()	mac_enable_irq( IRQ_MAC_SCSI ); 
-#define	DISABLE_IRQ()	mac_disable_irq( IRQ_MAC_SCSI );
-
 extern void via_scsi_clear(void);
 
 #ifdef RESET_BOOT
@@ -222,7 +223,7 @@ static struct Scsi_Host *default_instance;
 #endif
 
 /*
- * Function : int macscsi_detect(Scsi_Host_Template * tpnt)
+ * Function : int macscsi_detect(struct scsi_host_template * tpnt)
  *
  * Purpose : initializes mac NCR5380 driver based on the
  *	command line / compile time port and irq definitions.
@@ -233,7 +234,7 @@ static struct Scsi_Host *default_instance;
  *
  */
  
-int macscsi_detect(Scsi_Host_Template * tpnt)
+int macscsi_detect(struct scsi_host_template * tpnt)
 {
     static int called = 0;
     int flags = 0;
@@ -351,7 +352,7 @@ static void mac_scsi_reset_boot(struct Scsi_Host *instance)
 	printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." );
 
 	/* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */
-	mac_disable_irq(IRQ_MAC_SCSI);
+	disable_irq(IRQ_MAC_SCSI);
 
 	/* get in phase */
 	NCR5380_write( TARGET_COMMAND_REG,
@@ -369,7 +370,7 @@ static void mac_scsi_reset_boot(struct Scsi_Host *instance)
 		barrier();
 
 	/* switch on SCSI IRQ again */
-	mac_enable_irq(IRQ_MAC_SCSI);
+	enable_irq(IRQ_MAC_SCSI);
 
 	printk(KERN_INFO " done\n" );
 }
@@ -575,13 +576,9 @@ static int macscsi_pwrite (struct Scsi_Host *instance,
 }
 
 
-/* These control the behaviour of the generic 5380 core */
-#define AUTOSENSE
-#define PSEUDO_DMA
-
 #include "NCR5380.c"
 
-static Scsi_Host_Template driver_template = {
+static struct scsi_host_template driver_template = {
 	.proc_name			= "Mac5380",
 	.proc_info			= macscsi_proc_info,
 	.name				= "Macintosh NCR5380 SCSI",