X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fscsi%2Faic7xxx%2FKconfig.aic7xxx;h=88da670a7915bee0ecdda3cfbafc942512da7dd8;hb=38e80121bd7d0c493072442ac7eddcba165a07a8;hp=6c2c395554ff3d37b7f7673a01327d59c976a55a;hpb=d65177c1ae7f085723154105c5dc8d9e16ae8265;p=linux-2.6

diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index 6c2c395554..88da670a79 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -27,12 +27,12 @@ config AIC7XXX_CMDS_PER_DEVICE
 	to be used for any device.  The aic7xxx driver will automatically
 	vary this number based on device behavior.  For devices with a
 	fixed maximum, the driver will eventually lock to this maximum
-	and display a console message inidicating this value.
+	and display a console message indicating this value.
 
 	Due to resource allocation issues in the Linux SCSI mid-layer, using
 	a high number of commands per device may result in memory allocation
 	failures when many devices are attached to the system.  For this reason,
-	the default is set to 32.  Higher values may result in higer performance
+	the default is set to 32.  Higher values may result in higher performance
 	on some devices.  The upper bound is 253.  0 disables tagged queueing.
 
 	Per device tag depth can be controlled via the kernel command line
@@ -50,16 +50,6 @@ config AIC7XXX_RESET_DELAY_MS
 
 	Default: 5000 (5 seconds)
 
-config AIC7XXX_PROBE_EISA_VL
-	bool "Probe for EISA and VL AIC7XXX Adapters"
-	depends on SCSI_AIC7XXX && EISA
-	help
-	Probe for EISA and VLB Aic7xxx controllers.  In many newer systems,
-	the invasive probes necessary to detect these controllers can cause
-	other devices to fail.  For this reason, the non-PCI probe code is
-	disabled by default.  The current value of this option can be "toggled"
-	via the no_probe kernel command line option.
-
 config AIC7XXX_BUILD_FIRMWARE
 	bool "Build Adapter Firmware with Kernel Build"
 	depends on SCSI_AIC7XXX && !PREVENT_FIRMWARE_BUILD
@@ -86,7 +76,7 @@ config AIC7XXX_DEBUG_MASK
         default "0"
         help
 	Bit mask of debug options that is only valid if the
-	CONFIG_AIC7XXX_DEBUG_ENBLE option is enabled.  The bits in this mask
+	CONFIG_AIC7XXX_DEBUG_ENABLE option is enabled.  The bits in this mask
 	are defined in the drivers/scsi/aic7xxx/aic7xxx.h - search for the
 	variable ahc_debug in that file to find them.