X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fscsi%2FNCR53c406a.c;h=3168a1794849657c5447df861331e1329a845e91;hb=fb9fc395174138983a49f2da982ed14caabbe741;hp=d4613815f685d26115808d1887223e3c8d7b2e96;hpb=9eb200748878751310cd9848c5dd4d467960beec;p=linux-2.6

diff --git a/drivers/scsi/NCR53c406a.c b/drivers/scsi/NCR53c406a.c
index d4613815f6..3168a17948 100644
--- a/drivers/scsi/NCR53c406a.c
+++ b/drivers/scsi/NCR53c406a.c
@@ -41,7 +41,6 @@
 
 #include <linux/errno.h>
 #include <linux/ioport.h>
-#include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/proc_fs.h>
 #include <linux/stat.h>
@@ -220,9 +219,11 @@ static void *addresses[] = {
 static unsigned short ports[] = { 0x230, 0x330, 0x280, 0x290, 0x330, 0x340, 0x300, 0x310, 0x348, 0x350 };
 #define PORT_COUNT ARRAY_SIZE(ports)
 
+#ifndef MODULE
 /* possible interrupt channels */
 static unsigned short intrs[] = { 10, 11, 12, 15 };
 #define INTR_COUNT ARRAY_SIZE(intrs)
+#endif /* !MODULE */
 
 /* signatures for NCR 53c406a based controllers */
 #if USE_BIOS
@@ -605,6 +606,7 @@ static int NCR53c406a_release(struct Scsi_Host *shost)
 	return 0;
 }
 
+#ifndef MODULE
 /* called from init/main.c */
 static int __init NCR53c406a_setup(char *str)
 {
@@ -661,6 +663,8 @@ static int __init NCR53c406a_setup(char *str)
 
 __setup("ncr53c406a=", NCR53c406a_setup);
 
+#endif /* !MODULE */
+
 static const char *NCR53c406a_info(struct Scsi_Host *SChost)
 {
 	DEB(printk("NCR53c406a_info called\n"));
@@ -694,7 +698,7 @@ static int NCR53c406a_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 	int i;
 
 	VDEB(printk("NCR53c406a_queue called\n"));
-	DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n", SCpnt->cmnd[0], SCpnt->cmd_len, SCpnt->target, SCpnt->lun, SCpnt->request_bufflen));
+	DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n", SCpnt->cmnd[0], SCpnt->cmd_len, SCpnt->target, SCpnt->lun, scsi_bufflen(SCpnt)));
 
 #if 0
 	VDEB(for (i = 0; i < SCpnt->cmd_len; i++)
@@ -781,8 +785,8 @@ static void NCR53c406a_intr(void *dev_id)
 	unsigned char status, int_reg;
 #if USE_PIO
 	unsigned char pio_status;
-	struct scatterlist *sglist;
-	unsigned int sgcount;
+	struct scatterlist *sg;
+        int i;
 #endif
 
 	VDEB(printk("NCR53c406a_intr called\n"));
@@ -862,22 +866,18 @@ static void NCR53c406a_intr(void *dev_id)
 			current_SC->SCp.phase = data_out;
 			VDEB(printk("NCR53c406a: Data-Out phase\n"));
 			outb(FLUSH_FIFO, CMD_REG);
-			LOAD_DMA_COUNT(current_SC->request_bufflen);	/* Max transfer size */
+			LOAD_DMA_COUNT(scsi_bufflen(current_SC));	/* Max transfer size */
 #if USE_DMA			/* No s/g support for DMA */
-			NCR53c406a_dma_write(current_SC->request_buffer, current_SC->request_bufflen);
+			NCR53c406a_dma_write(scsi_sglist(current_SC),
+                                             scsdi_bufflen(current_SC));
+
 #endif				/* USE_DMA */
 			outb(TRANSFER_INFO | DMA_OP, CMD_REG);
 #if USE_PIO
-			if (!current_SC->use_sg)	/* Don't use scatter-gather */
-				NCR53c406a_pio_write(current_SC->request_buffer, current_SC->request_bufflen);
-			else {	/* use scatter-gather */
-				sgcount = current_SC->use_sg;
-				sglist = current_SC->request_buffer;
-				while (sgcount--) {
-					NCR53c406a_pio_write(page_address(sglist->page) + sglist->offset, sglist->length);
-					sglist++;
-				}
-			}
+                        scsi_for_each_sg(current_SC, sg, scsi_sg_count(current_SC), i) {
+                                NCR53c406a_pio_write(page_address(sg->page) + sg->offset,
+                                                     sg->length);
+                        }
 			REG0;
 #endif				/* USE_PIO */
 		}
@@ -889,22 +889,17 @@ static void NCR53c406a_intr(void *dev_id)
 			current_SC->SCp.phase = data_in;
 			VDEB(printk("NCR53c406a: Data-In phase\n"));
 			outb(FLUSH_FIFO, CMD_REG);
-			LOAD_DMA_COUNT(current_SC->request_bufflen);	/* Max transfer size */
+			LOAD_DMA_COUNT(scsi_bufflen(current_SC));	/* Max transfer size */
 #if USE_DMA			/* No s/g support for DMA */
-			NCR53c406a_dma_read(current_SC->request_buffer, current_SC->request_bufflen);
+			NCR53c406a_dma_read(scsi_sglist(current_SC),
+                                            scsdi_bufflen(current_SC));
 #endif				/* USE_DMA */
 			outb(TRANSFER_INFO | DMA_OP, CMD_REG);
 #if USE_PIO
-			if (!current_SC->use_sg)	/* Don't use scatter-gather */
-				NCR53c406a_pio_read(current_SC->request_buffer, current_SC->request_bufflen);
-			else {	/* Use scatter-gather */
-				sgcount = current_SC->use_sg;
-				sglist = current_SC->request_buffer;
-				while (sgcount--) {
-					NCR53c406a_pio_read(page_address(sglist->page) + sglist->offset, sglist->length);
-					sglist++;
-				}
-			}
+                        scsi_for_each_sg(current_SC, sg, scsi_sg_count(current_SC), i) {
+                                NCR53c406a_pio_read(page_address(sg->page) + sg->offset,
+                                                    sg->length);
+                        }
 			REG0;
 #endif				/* USE_PIO */
 		}
@@ -1071,7 +1066,8 @@ static struct scsi_host_template driver_template =
      .sg_tablesize      	= 32			/*SG_ALL*/ /*SG_NONE*/, 
      .cmd_per_lun       	= 1			/* commands per lun */, 
      .unchecked_isa_dma 	= 1			/* unchecked_isa_dma */,
-     .use_clustering    	= ENABLE_CLUSTERING                               
+     .use_clustering    	= ENABLE_CLUSTERING,
+     .use_sg_chaining           = ENABLE_SG_CHAINING,
 };
 
 #include "scsi_module.c"