X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fparport%2FKconfig;h=209b4a464bcfe24c129a9d703a43a728998fc0bf;hb=5f3b28781cbc030351e2fa0712602afbea592aae;hp=4d8dc27ea9d199043c36c85bdad8a3ca507135f8;hpb=816724e65c72a90a44fbad0ef0b59b186c85fa90;p=linux-2.6

diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 4d8dc27ea9..209b4a464b 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -5,10 +5,9 @@
 # Parport configuration.
 #
 
-menu "Parallel port support"
-
-config PARPORT
+menuconfig PARPORT
 	tristate "Parallel port support"
+	depends on HAS_IOMEM
 	---help---
 	  If you want to use devices connected to your machine's parallel port
 	  (the connector at the computer with 25 holes), e.g. printer, ZIP
@@ -32,9 +31,12 @@ config PARPORT
 
 	  If unsure, say Y.
 
+if PARPORT
+
 config PARPORT_PC
 	tristate "PC-style hardware"
-	depends on PARPORT && (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV
+	depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
+		(!M68K || ISA) && !MN10300 && !AVR32
 	---help---
 	  You should say Y here if you have a PC-style parallel port. All
 	  IBM PC compatible computers and some Alphas have PC-style
@@ -82,12 +84,9 @@ config PARPORT_PC_PCMCIA
 	  Say Y here if you need PCMCIA support for your PC-style parallel
 	  ports. If unsure, say N.
 
-config PARPORT_NOT_PC
-	bool
-
 config PARPORT_IP32
 	tristate "SGI IP32 builtin port (EXPERIMENTAL)"
-	depends on SGI_IP32 && PARPORT && EXPERIMENTAL
+	depends on SGI_IP32 && EXPERIMENTAL
 	select PARPORT_NOT_PC
 	help
 	  Say Y here if you need support for the parallel port on
@@ -96,7 +95,7 @@ config PARPORT_IP32
 
 config PARPORT_AMIGA
 	tristate "Amiga builtin port"
-	depends on AMIGA && PARPORT
+	depends on AMIGA
 	select PARPORT_NOT_PC
 	help
 	  Say Y here if you need support for the parallel port hardware on
@@ -105,7 +104,7 @@ config PARPORT_AMIGA
 
 config PARPORT_MFC3
 	tristate "Multiface III parallel port"
-	depends on ZORRO && PARPORT
+	depends on ZORRO
 	select PARPORT_NOT_PC
 	help
 	  Say Y here if you need parallel port support for the MFC3 card.
@@ -114,7 +113,7 @@ config PARPORT_MFC3
 
 config PARPORT_ATARI
 	tristate "Atari hardware"
-	depends on ATARI && PARPORT
+	depends on ATARI
 	select PARPORT_NOT_PC
 	help
 	  Say Y here if you need support for the parallel port hardware on
@@ -124,21 +123,30 @@ config PARPORT_ATARI
 config PARPORT_GSC
 	tristate
 	default GSC
-	depends on PARPORT
 	select PARPORT_NOT_PC
 
 config PARPORT_SUNBPP
 	tristate "Sparc hardware (EXPERIMENTAL)"
-	depends on SBUS && PARPORT && EXPERIMENTAL
+	depends on SBUS && EXPERIMENTAL
 	select PARPORT_NOT_PC
 	help
 	  This driver provides support for the bidirectional parallel port
 	  found on many Sun machines. Note that many of the newer Ultras
 	  actually have pc style hardware instead.
 
+config PARPORT_AX88796
+	tristate "AX88796 Parallel Port"
+	select PARPORT_NOT_PC
+	help
+	  Say Y here if you need support for the parallel port hardware on
+	  the AX88796 network controller chip. This code is also available
+	  as a module (say M), called parport_ax88796.
+
+	  The driver is not dependant on the AX88796 network driver, and
+	  should not interfere with the networking functions of the chip.
+
 config PARPORT_1284
 	bool "IEEE 1284 transfer modes"
-	depends on PARPORT
 	help
 	  If you have a printer that supports status readback or device ID, or
 	  want to use a device that uses enhanced parallel port transfer modes
@@ -146,5 +154,7 @@ config PARPORT_1284
 	  transfer modes. Also say Y if you want device ID information to
 	  appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
 
-endmenu
+config PARPORT_NOT_PC
+	bool
 
+endif # PARPORT