X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fparisc%2Fsuperio.c;h=1e8d2d17f04c63d921fe827402ded98252affa87;hb=ec42418f1973e1f77da1fcca3be59c0acb878a9d;hp=ad6d3b28a3a66d28bda4d8efa9d551c67901c866;hpb=2e9abdd9bad485970b37cd53a82f92702054984c;p=linux-2.6

diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index ad6d3b28a3..1e8d2d17f0 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -12,6 +12,7 @@
  *      (C) Copyright 2001 John Marvin <jsm fc hp com>
  *      (C) Copyright 2003 Grant Grundler <grundler parisc-linux org>
  *	(C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
+ *	(C) Copyright 2006 Helge Deller <deller@gmx.de>
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License as
@@ -72,6 +73,7 @@
 #include <linux/termios.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/delay.h>
 
 #include <asm/io.h>
@@ -93,7 +95,7 @@ static struct superio_device sio_dev;
 #define PFX	SUPERIO ": "
 
 static irqreturn_t
-superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
+superio_interrupt(int parent_irq, void *devp)
 {
 	u8 results;
 	u8 local_irq;
@@ -137,7 +139,7 @@ superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
 	}
 
 	/* Call the appropriate device's interrupt */
-	__do_IRQ(local_irq, regs);
+	__do_IRQ(local_irq);
 
 	/* set EOI - forces a new interrupt if a lower priority device
 	 * still needs service.
@@ -153,8 +155,9 @@ superio_init(struct pci_dev *pcidev)
 	struct superio_device *sio = &sio_dev;
 	struct pci_dev *pdev = sio->lio_pdev;
 	u16 word;
+	int ret;
 
-        if (sio->suckyio_irq_enabled)                                       
+	if (sio->suckyio_irq_enabled)
 		return;
 
 	BUG_ON(!pdev);
@@ -193,12 +196,13 @@ superio_init(struct pci_dev *pcidev)
 	request_region (sio->acpi_base, 0x1f, "acpi");
 
 	/* Enable the legacy I/O function */
-        pci_read_config_word (pdev, PCI_COMMAND, &word);
+	pci_read_config_word (pdev, PCI_COMMAND, &word);
 	word |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_IO;
 	pci_write_config_word (pdev, PCI_COMMAND, word);
 
 	pci_set_master (pdev);
-	pci_enable_device(pdev);
+	ret = pci_enable_device(pdev);
+	BUG_ON(ret < 0);	/* not too much we can do about this... */
 
 	/*
 	 * Next project is programming the onboard interrupt controllers.
@@ -270,7 +274,7 @@ superio_init(struct pci_dev *pcidev)
 	else
 		printk(KERN_ERR PFX "USB regulator not initialized!\n");
 
-	if (request_irq(pdev->irq, superio_interrupt, SA_INTERRUPT,
+	if (request_irq(pdev->irq, superio_interrupt, IRQF_DISABLED,
 			SUPERIO, (void *)sio)) {
 
 		printk(KERN_ERR PFX "could not get irq\n");
@@ -359,7 +363,7 @@ int superio_fixup_irq(struct pci_dev *pcidev)
 #endif
 
 	for (i = 0; i < 16; i++) {
-		irq_desc[i].handler = &superio_interrupt_type;
+		irq_desc[i].chip = &superio_interrupt_type;
 	}
 
 	/*
@@ -388,50 +392,41 @@ int superio_fixup_irq(struct pci_dev *pcidev)
 	return local_irq;
 }
 
-static struct uart_port serial[] = {
-	{
-		.iotype		= UPIO_PORT,
-		.line		= 0,
-		.type		= PORT_16550A,
-		.uartclk	= 115200*16,
-		.fifosize	= 16,
-	},
-	{
-		.iotype		= UPIO_PORT,
-		.line		= 1,
-		.type		= PORT_16550A,
-		.uartclk	= 115200*16,
-		.fifosize	= 16,
-	}
-};
-
-static void __devinit superio_serial_init(void)
+static void __init superio_serial_init(void)
 {
 #ifdef CONFIG_SERIAL_8250
 	int retval;
-        
-	serial[0].iobase = sio_dev.sp1_base;
-	serial[0].irq = SP1_IRQ;
-	spin_lock_init(&serial[0].lock);
-
-	retval = early_serial_setup(&serial[0]);
+	struct uart_port serial_port;
+
+	memset(&serial_port, 0, sizeof(serial_port));
+	serial_port.iotype	= UPIO_PORT;
+	serial_port.type	= PORT_16550A;
+	serial_port.uartclk	= 115200*16;
+	serial_port.fifosize	= 16;
+	spin_lock_init(&serial_port.lock);
+
+	/* serial port #1 */
+	serial_port.iobase	= sio_dev.sp1_base;
+	serial_port.irq		= SP1_IRQ;
+	serial_port.line	= 0;
+	retval = early_serial_setup(&serial_port);
 	if (retval < 0) {
 		printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
 		return;
 	}
 
-	serial[1].iobase = sio_dev.sp2_base;
-	serial[1].irq = SP2_IRQ;
-	spin_lock_init(&serial[1].lock);
-	retval = early_serial_setup(&serial[1]);
-
+	/* serial port #2 */
+	serial_port.iobase	= sio_dev.sp2_base;
+	serial_port.irq		= SP2_IRQ;
+	serial_port.line	= 1;
+	retval = early_serial_setup(&serial_port);
 	if (retval < 0)
 		printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
 #endif /* CONFIG_SERIAL_8250 */
 }
 
 
-static void __devinit superio_parport_init(void)
+static void __init superio_parport_init(void)
 {
 #ifdef CONFIG_PARPORT_PC
 	if (!parport_pc_probe_port(sio_dev.pp_base,
@@ -458,7 +453,7 @@ static void superio_fixup_pci(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, superio_fixup_pci);
 
 
-static int __devinit
+static int __init
 superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct superio_device *sio = &sio_dev;
@@ -493,7 +488,7 @@ superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	return -ENODEV;
 }
 
-static struct pci_device_id superio_tbl[] = {
+static const struct pci_device_id superio_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_USB) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415) },