X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fzd1211rw%2Fzd_chip.h;h=f8c061a9b6ecd2f181b938ee7f14a5deaa45956b;hb=c92758ceda477b1333fde35327cfa867dcc47bd1;hp=009c03777a3543ef369ff889dda72b5867498971;hpb=c64768a7d671bcde80bca2aed93f9e07edc069c3;p=linux-2.6

diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index 009c03777a..f8c061a9b6 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -489,6 +489,7 @@ enum {
 
 #define CR_RX_OFFSET			CTL_REG(0x065c)
 
+#define CR_BCN_LENGTH			CTL_REG(0x0664)
 #define CR_PHY_DELAY			CTL_REG(0x066C)
 #define CR_BCN_FIFO			CTL_REG(0x0670)
 #define CR_SNIFFER_ON			CTL_REG(0x0674)
@@ -545,6 +546,8 @@ enum {
 #define RX_FILTER_CTRL (RX_FILTER_RTS | RX_FILTER_CTS | \
 	RX_FILTER_CFEND | RX_FILTER_CFACK)
 
+#define BCN_MODE_IBSS			0x2000000
+
 /* Monitor mode sets filter to 0xfffff */
 
 #define CR_ACK_TIMEOUT_EXT		CTL_REG(0x0690)
@@ -578,6 +581,11 @@ enum {
 
 /* CAM: Continuous Access Mode (power management) */
 #define CR_CAM_MODE			CTL_REG(0x0700)
+#define MODE_IBSS			0x0
+#define MODE_AP				0x1
+#define MODE_STA			0x2
+#define MODE_AP_WDS			0x3
+
 #define CR_CAM_ROLL_TB_LOW		CTL_REG(0x0704)
 #define CR_CAM_ROLL_TB_HIGH		CTL_REG(0x0708)
 #define CR_CAM_ADDRESS			CTL_REG(0x070C)
@@ -625,11 +633,10 @@ enum {
 #define CR_S_MD				CTL_REG(0x0830)
 
 #define CR_USB_DEBUG_PORT		CTL_REG(0x0888)
-
-#define CR_ZD1211B_TX_PWR_CTL1		CTL_REG(0x0b00)
-#define CR_ZD1211B_TX_PWR_CTL2		CTL_REG(0x0b04)
-#define CR_ZD1211B_TX_PWR_CTL3		CTL_REG(0x0b08)
-#define CR_ZD1211B_TX_PWR_CTL4		CTL_REG(0x0b0c)
+#define CR_ZD1211B_CWIN_MAX_MIN_AC0	CTL_REG(0x0b00)
+#define CR_ZD1211B_CWIN_MAX_MIN_AC1	CTL_REG(0x0b04)
+#define CR_ZD1211B_CWIN_MAX_MIN_AC2	CTL_REG(0x0b08)
+#define CR_ZD1211B_CWIN_MAX_MIN_AC3	CTL_REG(0x0b0c)
 #define CR_ZD1211B_AIFS_CTL1		CTL_REG(0x0b10)
 #define CR_ZD1211B_AIFS_CTL2		CTL_REG(0x0b14)
 #define CR_ZD1211B_TXOP			CTL_REG(0x0b20)