X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fwavelan_cs.c;h=b584c0ecc62d1eeb191d6d5443eb34ec650b242d;hb=e66d90fb4abd0a27ee96f57a32fb561221c4d6ae;hp=06eea6ab7bf065278f46d12bae48149d0c579d53;hpb=3098a1801f8b92575a5cd69c77d9fa94ea504dde;p=linux-2.6 diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 06eea6ab7b..b584c0ecc6 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -102,7 +102,7 @@ hacr_write(u_long base, * Write to card's Host Adapter Command Register. Include a delay for * those times when it is needed. */ -static inline void +static void hacr_write_slow(u_long base, u_char hacr) { @@ -255,7 +255,7 @@ update_psa_checksum(struct net_device * dev) /* * Write 1 byte to the MMC. */ -static inline void +static void mmc_out(u_long base, u_short o, u_char d) @@ -275,7 +275,7 @@ mmc_out(u_long base, * Routine to write bytes to the Modem Management Controller. * We start by the end because it is the way it should be ! */ -static inline void +static void mmc_write(u_long base, u_char o, u_char * b, @@ -293,7 +293,7 @@ mmc_write(u_long base, * Read 1 byte from the MMC. * Optimised version for 1 byte, avoid using memory... */ -static inline u_char +static u_char mmc_in(u_long base, u_short o) { @@ -318,7 +318,7 @@ mmc_in(u_long base, * (code has just been moved in the above function) * We start by the end because it is the way it should be ! */ -static inline void +static void mmc_read(u_long base, u_char o, u_char * b, @@ -350,9 +350,8 @@ mmc_encr(u_long base) /* i/o port of the card */ /*------------------------------------------------------------------*/ /* * Wait for the frequency EEprom to complete a command... - * I hope this one will be optimally inlined... */ -static inline void +static void fee_wait(u_long base, /* i/o port of the card */ int delay, /* Base delay to wait for */ int number) /* Number of time to wait */ @@ -738,9 +737,9 @@ static void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp) } /* Called when a WavePoint beacon is received */ -static inline void wl_roam_gather(struct net_device * dev, - u_char * hdr, /* Beacon header */ - u_char * stats) /* SNR, Signal quality +static void wl_roam_gather(struct net_device * dev, + u_char * hdr, /* Beacon header */ + u_char * stats) /* SNR, Signal quality of packet */ { wavepoint_beacon *beacon= (wavepoint_beacon *)hdr; /* Rcvd. Beacon */ @@ -794,7 +793,7 @@ out: static inline int WAVELAN_BEACON(unsigned char *data) { wavepoint_beacon *beacon= (wavepoint_beacon *)data; - static wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00}; + static const wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00}; if(memcmp(beacon,&beacon_template,9)==0) return 1; @@ -980,7 +979,7 @@ read_ringbuf(struct net_device * dev, * wavelan_interrupt is not an option...), so you may experience * some delay sometime... */ -static inline void +static void wv_82593_reconfig(struct net_device * dev) { net_local * lp = netdev_priv(dev); @@ -1075,11 +1074,9 @@ wv_psa_show(psa_t * p) p->psa_call_code[6], p->psa_call_code[7]); #ifdef DEBUG_SHOW_UNUSED - printk(KERN_DEBUG "psa_reserved[]: %02X:%02X:%02X:%02X\n", + printk(KERN_DEBUG "psa_reserved[]: %02X:%02X\n", p->psa_reserved[0], - p->psa_reserved[1], - p->psa_reserved[2], - p->psa_reserved[3]); + p->psa_reserved[1]); #endif /* DEBUG_SHOW_UNUSED */ printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status); printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]); @@ -1233,7 +1230,7 @@ wv_local_show(struct net_device * dev) /* * Dump packet header (and content if necessary) on the screen */ -static inline void +static void wv_packet_info(u_char * p, /* Packet to dump */ int length, /* Length of the packet */ char * msg1, /* Name of the device */ @@ -1272,7 +1269,7 @@ wv_packet_info(u_char * p, /* Packet to dump */ * This is the information which is displayed by the driver at startup * There is a lot of flag to configure it at your will... */ -static inline void +static void wv_init_info(struct net_device * dev) { unsigned int base = dev->base_addr; @@ -1509,7 +1506,7 @@ wavelan_set_mac_address(struct net_device * dev, * Frequency setting (for hardware able of it) * It's a bit complicated and you don't really want to look into it... */ -static inline int +static int wv_set_frequency(u_long base, /* i/o port of the card */ iw_freq * frequency) { @@ -1706,7 +1703,7 @@ wv_set_frequency(u_long base, /* i/o port of the card */ /* * Give the list of available frequencies */ -static inline int +static int wv_frequency_list(u_long base, /* i/o port of the card */ iw_freq * list, /* List of frequency to fill */ int max) /* Maximum number of frequencies */ @@ -2759,7 +2756,7 @@ wavelan_get_wireless_stats(struct net_device * dev) * frame pointer and verify that the frame seem correct * (called by wv_packet_rcv()) */ -static inline int +static int wv_start_of_frame(struct net_device * dev, int rfp, /* end of frame */ int wrap) /* start of buffer */ @@ -2821,7 +2818,7 @@ wv_start_of_frame(struct net_device * dev, * Note: if any errors occur, the packet is "dropped on the floor" * (called by wv_packet_rcv()) */ -static inline void +static void wv_packet_read(struct net_device * dev, int fd_p, int sksize) @@ -2922,7 +2919,7 @@ wv_packet_read(struct net_device * dev, * (called by wavelan_interrupt()) * Note : the spinlock is already grabbed for us and irq are disabled. */ -static inline void +static void wv_packet_rcv(struct net_device * dev) { unsigned int base = dev->base_addr; @@ -3056,7 +3053,7 @@ wv_packet_rcv(struct net_device * dev) * the transmit. * (called in wavelan_packet_xmit()) */ -static inline void +static void wv_packet_write(struct net_device * dev, void * buf, short length) @@ -3180,7 +3177,7 @@ wavelan_packet_xmit(struct sk_buff * skb, * Routine to initialize the Modem Management Controller. * (called by wv_hw_config()) */ -static inline int +static int wv_mmc_init(struct net_device * dev) { unsigned int base = dev->base_addr; @@ -3699,7 +3696,7 @@ wv_82593_config(struct net_device * dev) * wavelan. * (called by wv_config()) */ -static inline int +static int wv_pcmcia_reset(struct net_device * dev) { int i; @@ -3864,7 +3861,7 @@ wv_hw_config(struct net_device * dev) * 2. Start the LAN controller's receive unit * (called by wavelan_event(), wavelan_watchdog() and wavelan_open()) */ -static inline void +static void wv_hw_reset(struct net_device * dev) { net_local * lp = netdev_priv(dev); @@ -3895,7 +3892,7 @@ wv_hw_reset(struct net_device * dev) * device available to the system. * (called by wavelan_event()) */ -static inline int +static int wv_pcmcia_config(struct pcmcia_device * link) { struct net_device * dev = (struct net_device *) link->priv;