X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Frt2x00%2Frt2x00usb.h;h=15b404aa714da8ceb9863f475fbc41140d65c19b;hb=b8be63ffa5dc44324e7f507997870fa3e4b17619;hp=275b089a2a4d969a910cc90b8dbb194388d69cf5;hpb=3b640f21af4b6b36b546fecbd3fe5109981360da;p=linux-2.6

diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index 275b089a2a..15b404aa71 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -47,6 +47,20 @@
 #define REGISTER_TIMEOUT		500
 #define REGISTER_TIMEOUT_FIRMWARE	1000
 
+/**
+ * REGISTER_TIMEOUT16 - Determine the timeout for 16bit register access
+ * @__datalen: Data length
+ */
+#define REGISTER_TIMEOUT16(__datalen)	\
+	( REGISTER_TIMEOUT * ((__datalen) / sizeof(u16)) )
+
+/**
+ * REGISTER_TIMEOUT32 - Determine the timeout for 32bit register access
+ * @__datalen: Data length
+ */
+#define REGISTER_TIMEOUT32(__datalen)	\
+	( REGISTER_TIMEOUT * ((__datalen) / sizeof(u32)) )
+
 /*
  * Cache size
  */
@@ -185,33 +199,14 @@ static inline int rt2x00usb_vendor_request_sw(struct rt2x00_dev *rt2x00dev,
  * kmalloc for correct handling inside the kernel USB layer.
  */
 static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev,
-					__le16 *eeprom, const u16 lenght)
+					__le16 *eeprom, const u16 length)
 {
-	int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16));
-
 	return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ,
 					USB_VENDOR_REQUEST_IN, 0, 0,
-					eeprom, lenght, timeout);
+					eeprom, length,
+					REGISTER_TIMEOUT16(length));
 }
 
-/**
- * rt2x00usb_vendor_request_async - Send register command to device (async)
- * @rt2x00dev: Pointer to &struct rt2x00_dev
- * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
- * @offset: Register offset to perform action on
- * @value: Value to write to device
- *
- * Asynchroneous version of &rt2x00usb_vendor_request this is required
- * for some routines where the driver cannot sleep because it is in
- * irq context. Note that with this function the driver will not be
- * notified on failure or timeout of the command. It will only be notified
- * if the start of the command succeeded or not. This means it should not be
- * used when the command must succeed.
- */
-int rt2x00usb_vendor_request_async(struct rt2x00_dev *rt2x00dev,
-				   const u8 request, const u16 offset,
-				   const u16 value);
-
 /*
  * Radio handlers
  */
@@ -225,30 +220,21 @@ int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev,
 			    struct ieee80211_tx_control *control);
 
 /**
- * struct queue_entry_priv_usb_rx: Per RX entry USB specific information
- *
- * @urb: Urb structure used for device communication.
- */
-struct queue_entry_priv_usb_rx {
-	struct urb *urb;
-};
-
-/**
- * struct queue_entry_priv_usb_tx: Per TX entry USB specific information
+ * struct queue_entry_priv_usb: Per entry USB specific information
  *
  * @urb: Urb structure used for device communication.
  * @control: mac80211 control structure used to transmit data.
  */
-struct queue_entry_priv_usb_tx {
+struct queue_entry_priv_usb {
 	struct urb *urb;
 
 	struct ieee80211_tx_control control;
 };
 
 /**
- * struct queue_entry_priv_usb_tx: Per TX entry USB specific information
+ * struct queue_entry_priv_usb_bcn: Per TX entry USB specific information
  *
- * The first section should match &struct queue_entry_priv_usb_tx exactly.
+ * The first section should match &struct queue_entry_priv_usb exactly.
  * rt2500usb can use this structure to send a guardian byte when working
  * with beacons.
  *