X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fiwlwifi%2Fiwl-csr.h;h=df9949ad3f61490b8be8979d4ab48de93dbaa86f;hb=b661c8190e91c0baeebf813fec7ff8e99e155a54;hp=12725796ea5f5bf63d83c23aca77006b1ba69c6e;hpb=886c35fbcf6fb2eee15687efc2d64d99b6ad9a4a;p=linux-2.6

diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 12725796ea..df9949ad3f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -95,8 +95,7 @@
 #define CSR_GIO_CHICKEN_BITS    (CSR_BASE+0x100)
 #define CSR_LED_REG             (CSR_BASE+0x094)
 
-/* Analog phase-lock-loop configuration (3945 only)
- * Set bit 24. */
+/* Analog phase-lock-loop configuration  */
 #define CSR_ANA_PLL_CFG         (CSR_BASE+0x20c)
 /*
  * Indicates hardware rev, to determine CCK backoff for txpower calculation.
@@ -170,6 +169,10 @@
 #define CSR49_FH_INT_TX_MASK	(CSR_FH_INT_BIT_TX_CHNL1 | \
 				 CSR_FH_INT_BIT_TX_CHNL0)
 
+/* GPIO */
+#define CSR_GPIO_IN_BIT_AUX_POWER                   (0x00000200)
+#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC                (0x00000000)
+#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC               (0x00000200)
 
 /* RESET */
 #define CSR_RESET_REG_FLAG_NEVO_RESET                (0x00000001)
@@ -191,6 +194,11 @@
 #define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW          (0x08000000)
 
 
+/* HW REV */
+#define CSR_HW_REV_TYPE_MSK            (0x00000F0)
+#define CSR_HW_REV_TYPE_3945           (0x00000D0)
+#define CSR_HW_REV_TYPE_4965           (0x0000000)
+
 /* EEPROM REG */
 #define CSR_EEPROM_REG_READ_VALID_MSK	(0x00000001)
 #define CSR_EEPROM_REG_BIT_CMD		(0x00000002)
@@ -206,11 +214,6 @@
 #define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED           (0x00000004)
 #define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT      (0x00000008)
 
-/* GPIO */
-#define CSR_GPIO_IN_BIT_AUX_POWER                   (0x00000200)
-#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC                (0x00000000)
-#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC		CSR_GPIO_IN_BIT_AUX_POWER
-
 /* GI Chicken Bits */
 #define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX  (0x00800000)
 #define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER  (0x20000000)
@@ -220,6 +223,10 @@
 #define CSR_LED_REG_TRUN_ON (0x78)
 #define CSR_LED_REG_TRUN_OFF (0x38)
 
+/* ANA_PLL */
+#define CSR39_ANA_PLL_CFG_VAL        (0x01000000)
+#define CSR50_ANA_PLL_CFG_VAL        (0x00880300)
+
 /*=== HBUS (Host-side Bus) ===*/
 #define HBUS_BASE	(0x400)
 /*