X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fiwlwifi%2Fiwl-4965-hw.h;h=29749e2a8ff06c5d4ad755ef56ab12ecd0af6424;hb=3e0d4cb12f6fd97193a455b49125398b2231c87c;hp=1a66b508a8eaf7efdec1e2c971205437422d64dd;hpb=e43fe686e48835ca027559a068bbe0b6d264a254;p=linux-2.6 diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h index 1a66b508a8..29749e2a8f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h @@ -62,13 +62,18 @@ *****************************************************************************/ /* * Please use this file (iwl-4965-hw.h) only for hardware-related definitions. - * Use iwl-4965-commands.h for uCode API definitions. - * Use iwl-4965.h for driver implementation definitions. + * Use iwl-commands.h for uCode API definitions. + * Use iwl-dev.h for driver implementation definitions. */ #ifndef __iwl_4965_hw_h__ #define __iwl_4965_hw_h__ +#include "iwl-fh.h" + +/* EERPROM */ +#define IWL4965_EEPROM_IMG_SIZE 1024 + /* * uCode queue management definitions ... * Queue #4 is the command queue for 3945 and 4965; map it to Tx FIFO chnl 4. @@ -93,7 +98,7 @@ #define IWL_RSSI_OFFSET 44 -#include "iwl-4965-commands.h" +#include "iwl-commands.h" #define PCI_LINK_CTRL 0x0F0 #define PCI_POWER_SOURCE 0x0C8 @@ -131,10 +136,8 @@ #define RTC_DATA_LOWER_BOUND (0x800000) #define IWL49_RTC_DATA_UPPER_BOUND (0x80A000) -#define IWL49_RTC_INST_SIZE \ - (IWL49_RTC_INST_UPPER_BOUND - RTC_INST_LOWER_BOUND) -#define IWL49_RTC_DATA_SIZE \ - (IWL49_RTC_DATA_UPPER_BOUND - RTC_DATA_LOWER_BOUND) +#define IWL49_RTC_INST_SIZE (IWL49_RTC_INST_UPPER_BOUND - RTC_INST_LOWER_BOUND) +#define IWL49_RTC_DATA_SIZE (IWL49_RTC_DATA_UPPER_BOUND - RTC_DATA_LOWER_BOUND) #define IWL_MAX_INST_SIZE IWL49_RTC_INST_SIZE #define IWL_MAX_DATA_SIZE IWL49_RTC_DATA_SIZE @@ -785,579 +788,13 @@ enum { /********************* END TXPOWER *****************************************/ -/****************************/ -/* Flow Handler Definitions */ -/****************************/ - -/** - * This I/O area is directly read/writable by driver (e.g. Linux uses writel()) - * Addresses are offsets from device's PCI hardware base address. - */ -#define FH_MEM_LOWER_BOUND (0x1000) -#define FH_MEM_UPPER_BOUND (0x1EF0) - -/** - * Keep-Warm (KW) buffer base address. - * - * Driver must allocate a 4KByte buffer that is used by 4965 for keeping the - * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency - * DRAM access when 4965 is Txing or Rxing. The dummy accesses prevent host - * from going into a power-savings mode that would cause higher DRAM latency, - * and possible data over/under-runs, before all Tx/Rx is complete. - * - * Driver loads IWL_FH_KW_MEM_ADDR_REG with the physical address (bits 35:4) - * of the buffer, which must be 4K aligned. Once this is set up, the 4965 - * automatically invokes keep-warm accesses when normal accesses might not - * be sufficient to maintain fast DRAM response. - * - * Bit fields: - * 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned - */ -#define IWL_FH_KW_MEM_ADDR_REG (FH_MEM_LOWER_BOUND + 0x97C) - - -/** - * TFD Circular Buffers Base (CBBC) addresses - * - * 4965 has 16 base pointer registers, one for each of 16 host-DRAM-resident - * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs) - * (see struct iwl_tfd_frame). These 16 pointer registers are offset by 0x04 - * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte - * aligned (address bits 0-7 must be 0). - * - * Bit fields in each pointer register: - * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned - */ -#define FH_MEM_CBBC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) -#define FH_MEM_CBBC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) - -/* Find TFD CB base pointer for given queue (range 0-15). */ -#define FH_MEM_CBBC_QUEUE(x) (FH_MEM_CBBC_LOWER_BOUND + (x) * 0x4) - - -/** - * Rx SRAM Control and Status Registers (RSCSR) - * - * These registers provide handshake between driver and 4965 for the Rx queue - * (this queue handles *all* command responses, notifications, Rx data, etc. - * sent from 4965 uCode to host driver). Unlike Tx, there is only one Rx - * queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can - * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer - * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1 - * mapping between RBDs and RBs. - * - * Driver must allocate host DRAM memory for the following, and set the - * physical address of each into 4965 registers: - * - * 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256 - * entries (although any power of 2, up to 4096, is selectable by driver). - * Each entry (1 dword) points to a receive buffer (RB) of consistent size - * (typically 4K, although 8K or 16K are also selectable by driver). - * Driver sets up RB size and number of RBDs in the CB via Rx config - * register FH_MEM_RCSR_CHNL0_CONFIG_REG. - * - * Bit fields within one RBD: - * 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned - * - * Driver sets physical address [35:8] of base of RBD circular buffer - * into FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0]. - * - * 2) Rx status buffer, 8 bytes, in which 4965 indicates which Rx Buffers - * (RBs) have been filled, via a "write pointer", actually the index of - * the RB's corresponding RBD within the circular buffer. Driver sets - * physical address [35:4] into FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0]. - * - * Bit fields in lower dword of Rx status buffer (upper dword not used - * by driver; see struct iwl4965_shared, val0): - * 31-12: Not used by driver - * 11- 0: Index of last filled Rx buffer descriptor - * (4965 writes, driver reads this value) - * - * As the driver prepares Receive Buffers (RBs) for 4965 to fill, driver must - * enter pointers to these RBs into contiguous RBD circular buffer entries, - * and update the 4965's "write" index register, FH_RSCSR_CHNL0_RBDCB_WPTR_REG. - * - * This "write" index corresponds to the *next* RBD that the driver will make - * available, i.e. one RBD past the tail of the ready-to-fill RBDs within - * the circular buffer. This value should initially be 0 (before preparing any - * RBs), should be 8 after preparing the first 8 RBs (for example), and must - * wrap back to 0 at the end of the circular buffer (but don't wrap before - * "read" index has advanced past 1! See below). - * NOTE: 4965 EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8. - * - * As the 4965 fills RBs (referenced from contiguous RBDs within the circular - * buffer), it updates the Rx status buffer in host DRAM, 2) described above, - * to tell the driver the index of the latest filled RBD. The driver must - * read this "read" index from DRAM after receiving an Rx interrupt from 4965. - * - * The driver must also internally keep track of a third index, which is the - * next RBD to process. When receiving an Rx interrupt, driver should process - * all filled but unprocessed RBs up to, but not including, the RB - * corresponding to the "read" index. For example, if "read" index becomes "1", - * driver may process the RB pointed to by RBD 0. Depending on volume of - * traffic, there may be many RBs to process. - * - * If read index == write index, 4965 thinks there is no room to put new data. - * Due to this, the maximum number of filled RBs is 255, instead of 256. To - * be safe, make sure that there is a gap of at least 2 RBDs between "write" - * and "read" indexes; that is, make sure that there are no more than 254 - * buffers waiting to be filled. - */ -#define FH_MEM_RSCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBC0) -#define FH_MEM_RSCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) -#define FH_MEM_RSCSR_CHNL0 (FH_MEM_RSCSR_LOWER_BOUND) - -/** - * Physical base address of 8-byte Rx Status buffer. - * Bit fields: - * 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned. - */ -#define FH_RSCSR_CHNL0_STTS_WPTR_REG (FH_MEM_RSCSR_CHNL0) - -/** - * Physical base address of Rx Buffer Descriptor Circular Buffer. - * Bit fields: - * 27-0: RBD CD physical base address [35:8], must be 256-byte aligned. - */ -#define FH_RSCSR_CHNL0_RBDCB_BASE_REG (FH_MEM_RSCSR_CHNL0 + 0x004) - -/** - * Rx write pointer (index, really!). - * Bit fields: - * 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1. - * NOTE: For 256-entry circular buffer, use only bits [7:0]. - */ -#define FH_RSCSR_CHNL0_RBDCB_WPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x008) -#define FH_RSCSR_CHNL0_WPTR (FH_RSCSR_CHNL0_RBDCB_WPTR_REG) - - -/** - * Rx Config/Status Registers (RCSR) - * Rx Config Reg for channel 0 (only channel used) - * - * Driver must initialize FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for - * normal operation (see bit fields). - * - * Clearing FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA. - * Driver should poll FH_MEM_RSSR_RX_STATUS_REG for - * FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing. - * - * Bit fields: - * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame, - * '10' operate normally - * 29-24: reserved - * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal), - * min "5" for 32 RBDs, max "12" for 4096 RBDs. - * 19-18: reserved - * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K, - * '10' 12K, '11' 16K. - * 15-14: reserved - * 13-12: IRQ destination; '00' none, '01' host driver (normal operation) - * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec) - * typical value 0x10 (about 1/2 msec) - * 3- 0: reserved - */ -#define FH_MEM_RCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) -#define FH_MEM_RCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xCC0) -#define FH_MEM_RCSR_CHNL0 (FH_MEM_RCSR_LOWER_BOUND) - -#define FH_MEM_RCSR_CHNL0_CONFIG_REG (FH_MEM_RCSR_CHNL0) - -#define FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MASK (0x00000FF0) /* bit 4-11 */ -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MASK (0x00001000) /* bit 12 */ -#define FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MASK (0x00008000) /* bit 15 */ -#define FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MASK (0x00030000) /* bits 16-17 */ -#define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MASK (0x00F00000) /* bits 20-23 */ -#define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MASK (0xC0000000) /* bits 30-31 */ - -#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT (20) -#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_BITSHIFT (4) -#define RX_RB_TIMEOUT (0x10) - -#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) -#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000) -#define FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000) - -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) - -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) - - -/** - * Rx Shared Status Registers (RSSR) - * - * After stopping Rx DMA channel (writing 0 to FH_MEM_RCSR_CHNL0_CONFIG_REG), - * driver must poll FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle. - * - * Bit fields: - * 24: 1 = Channel 0 is idle - * - * FH_MEM_RSSR_SHARED_CTRL_REG and FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV contain - * default values that should not be altered by the driver. - */ -#define FH_MEM_RSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC40) -#define FH_MEM_RSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) - -#define FH_MEM_RSSR_SHARED_CTRL_REG (FH_MEM_RSSR_LOWER_BOUND) -#define FH_MEM_RSSR_RX_STATUS_REG (FH_MEM_RSSR_LOWER_BOUND + 0x004) -#define FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV (FH_MEM_RSSR_LOWER_BOUND + 0x008) - -#define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) - - -/** - * Transmit DMA Channel Control/Status Registers (TCSR) - * - * 4965 has one configuration register for each of 8 Tx DMA/FIFO channels - * supported in hardware (don't confuse these with the 16 Tx queues in DRAM, - * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes. - * - * To use a Tx DMA channel, driver must initialize its - * IWL_FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with: - * - * IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | - * IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL - * - * All other bits should be 0. - * - * Bit fields: - * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame, - * '10' operate normally - * 29- 4: Reserved, set to "0" - * 3: Enable internal DMA requests (1, normal operation), disable (0) - * 2- 0: Reserved, set to "0" - */ -#define IWL_FH_TCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) -#define IWL_FH_TCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xE60) - -/* Find Control/Status reg for given Tx DMA/FIFO channel */ -#define IWL_FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ - (IWL_FH_TCSR_LOWER_BOUND + 0x20 * _chnl) - -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE_VAL (0x00000000) -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL (0x00000008) - -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000) -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) - -/** - * Tx Shared Status Registers (TSSR) - * - * After stopping Tx DMA channel (writing 0 to - * IWL_FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll - * IWL_FH_TSSR_TX_STATUS_REG until selected Tx channel is idle - * (channel's buffers empty | no pending requests). - * - * Bit fields: - * 31-24: 1 = Channel buffers empty (channel 7:0) - * 23-16: 1 = No pending requests (channel 7:0) - */ -#define IWL_FH_TSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xEA0) -#define IWL_FH_TSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xEC0) - -#define IWL_FH_TSSR_TX_STATUS_REG (IWL_FH_TSSR_LOWER_BOUND + 0x010) - -#define IWL_FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) \ - ((1 << (_chnl)) << 24) -#define IWL_FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl) \ - ((1 << (_chnl)) << 16) - -#define IWL_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) \ - (IWL_FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) | \ - IWL_FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl)) - - -/********************* START TX SCHEDULER *************************************/ - -/** - * 4965 Tx Scheduler - * - * The Tx Scheduler selects the next frame to be transmitted, chosing TFDs - * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in - * host DRAM. It steers each frame's Tx command (which contains the frame - * data) into one of up to 7 prioritized Tx DMA FIFO channels within the - * device. A queue maps to only one (selectable by driver) Tx DMA channel, - * but one DMA channel may take input from several queues. - * - * Tx DMA channels have dedicated purposes. For 4965, they are used as follows: - * - * 0 -- EDCA BK (background) frames, lowest priority - * 1 -- EDCA BE (best effort) frames, normal priority - * 2 -- EDCA VI (video) frames, higher priority - * 3 -- EDCA VO (voice) and management frames, highest priority - * 4 -- Commands (e.g. RXON, etc.) - * 5 -- HCCA short frames - * 6 -- HCCA long frames - * 7 -- not used by driver (device-internal only) - * - * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6. - * In addition, driver can map queues 7-15 to Tx DMA/FIFO channels 0-3 to - * support 11n aggregation via EDCA DMA channels. - * - * The driver sets up each queue to work in one of two modes: - * - * 1) Scheduler-Ack, in which the scheduler automatically supports a - * block-ack (BA) window of up to 64 TFDs. In this mode, each queue - * contains TFDs for a unique combination of Recipient Address (RA) - * and Traffic Identifier (TID), that is, traffic of a given - * Quality-Of-Service (QOS) priority, destined for a single station. - * - * In scheduler-ack mode, the scheduler keeps track of the Tx status of - * each frame within the BA window, including whether it's been transmitted, - * and whether it's been acknowledged by the receiving station. The device - * automatically processes block-acks received from the receiving STA, - * and reschedules un-acked frames to be retransmitted (successful - * Tx completion may end up being out-of-order). - * - * The driver must maintain the queue's Byte Count table in host DRAM - * (struct iwl4965_sched_queue_byte_cnt_tbl) for this mode. - * This mode does not support fragmentation. - * - * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order. - * The device may automatically retry Tx, but will retry only one frame - * at a time, until receiving ACK from receiving station, or reaching - * retry limit and giving up. - * - * The command queue (#4) must use this mode! - * This mode does not require use of the Byte Count table in host DRAM. - * - * Driver controls scheduler operation via 3 means: - * 1) Scheduler registers - * 2) Shared scheduler data base in internal 4956 SRAM - * 3) Shared data in host DRAM - * - * Initialization: - * - * When loading, driver should allocate memory for: - * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs. - * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory - * (1024 bytes for each queue). - * - * After receiving "Alive" response from uCode, driver must initialize - * the scheduler (especially for queue #4, the command queue, otherwise - * the driver can't issue commands!): - */ - -/** - * Max Tx window size is the max number of contiguous TFDs that the scheduler - * can keep track of at one time when creating block-ack chains of frames. - * Note that "64" matches the number of ack bits in a block-ack packet. - * Driver should use SCD_WIN_SIZE and SCD_FRAME_LIMIT values to initialize - * SCD_CONTEXT_QUEUE_OFFSET(x) values. - */ -#define SCD_WIN_SIZE 64 -#define SCD_FRAME_LIMIT 64 - -/* SCD registers are internal, must be accessed via HBUS_TARG_PRPH regs */ -#define SCD_START_OFFSET 0xa02c00 - -/* - * 4965 tells driver SRAM address for internal scheduler structs via this reg. - * Value is valid only after "Alive" response from uCode. - */ -#define SCD_SRAM_BASE_ADDR (SCD_START_OFFSET + 0x0) - -/* - * Driver may need to update queue-empty bits after changing queue's - * write and read pointers (indexes) during (re-)initialization (i.e. when - * scheduler is not tracking what's happening). - * Bit fields: - * 31-16: Write mask -- 1: update empty bit, 0: don't change empty bit - * 15-00: Empty state, one for each queue -- 1: empty, 0: non-empty - * NOTE: This register is not used by Linux driver. - */ -#define SCD_EMPTY_BITS (SCD_START_OFFSET + 0x4) - -/* - * Physical base address of array of byte count (BC) circular buffers (CBs). - * Each Tx queue has a BC CB in host DRAM to support Scheduler-ACK mode. - * This register points to BC CB for queue 0, must be on 1024-byte boundary. - * Others are spaced by 1024 bytes. - * Each BC CB is 2 bytes * (256 + 64) = 740 bytes, followed by 384 bytes pad. - * (Index into a queue's BC CB) = (index into queue's TFD CB) = (SSN & 0xff). - * Bit fields: - * 25-00: Byte Count CB physical address [35:10], must be 1024-byte aligned. - */ -#define SCD_DRAM_BASE_ADDR (SCD_START_OFFSET + 0x10) - -/* - * Enables any/all Tx DMA/FIFO channels. - * Scheduler generates requests for only the active channels. - * Set this to 0xff to enable all 8 channels (normal usage). - * Bit fields: - * 7- 0: Enable (1), disable (0), one bit for each channel 0-7 - */ -#define SCD_TXFACT (SCD_START_OFFSET + 0x1c) - -/* Mask to enable contiguous Tx DMA/FIFO channels between "lo" and "hi". */ -#define SCD_TXFACT_REG_TXFIFO_MASK(lo, hi) \ - ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) - -/* - * Queue (x) Write Pointers (indexes, really!), one for each Tx queue. - * Initialized and updated by driver as new TFDs are added to queue. - * NOTE: If using Block Ack, index must correspond to frame's - * Start Sequence Number; index = (SSN & 0xff) - * NOTE: Alternative to HBUS_TARG_WRPTR, which is what Linux driver uses? - */ -#define SCD_QUEUE_WRPTR(x) (SCD_START_OFFSET + 0x24 + (x) * 4) - -/* - * Queue (x) Read Pointers (indexes, really!), one for each Tx queue. - * For FIFO mode, index indicates next frame to transmit. - * For Scheduler-ACK mode, index indicates first frame in Tx window. - * Initialized by driver, updated by scheduler. - */ -#define SCD_QUEUE_RDPTR(x) (SCD_START_OFFSET + 0x64 + (x) * 4) - -/* - * Select which queues work in chain mode (1) vs. not (0). - * Use chain mode to build chains of aggregated frames. - * Bit fields: - * 31-16: Reserved - * 15-00: Mode, one bit for each queue -- 1: Chain mode, 0: one-at-a-time - * NOTE: If driver sets up queue for chain mode, it should be also set up - * Scheduler-ACK mode as well, via SCD_QUEUE_STATUS_BITS(x). - */ -#define SCD_QUEUECHAIN_SEL (SCD_START_OFFSET + 0xd0) - -/* - * Select which queues interrupt driver when scheduler increments - * a queue's read pointer (index). - * Bit fields: - * 31-16: Reserved - * 15-00: Interrupt enable, one bit for each queue -- 1: enabled, 0: disabled - * NOTE: This functionality is apparently a no-op; driver relies on interrupts - * from Rx queue to read Tx command responses and update Tx queues. - */ -#define SCD_INTERRUPT_MASK (SCD_START_OFFSET + 0xe4) - -/* - * Queue search status registers. One for each queue. - * Sets up queue mode and assigns queue to Tx DMA channel. - * Bit fields: - * 19-10: Write mask/enable bits for bits 0-9 - * 9: Driver should init to "0" - * 8: Scheduler-ACK mode (1), non-Scheduler-ACK (i.e. FIFO) mode (0). - * Driver should init to "1" for aggregation mode, or "0" otherwise. - * 7-6: Driver should init to "0" - * 5: Window Size Left; indicates whether scheduler can request - * another TFD, based on window size, etc. Driver should init - * this bit to "1" for aggregation mode, or "0" for non-agg. - * 4-1: Tx FIFO to use (range 0-7). - * 0: Queue is active (1), not active (0). - * Other bits should be written as "0" - * - * NOTE: If enabling Scheduler-ACK mode, chain mode should also be enabled - * via SCD_QUEUECHAIN_SEL. - */ -#define SCD_QUEUE_STATUS_BITS(x) (SCD_START_OFFSET + 0x104 + (x) * 4) - -/* Bit field positions */ -#define SCD_QUEUE_STTS_REG_POS_ACTIVE (0) -#define SCD_QUEUE_STTS_REG_POS_TXF (1) -#define SCD_QUEUE_STTS_REG_POS_WSL (5) -#define SCD_QUEUE_STTS_REG_POS_SCD_ACK (8) - -/* Write masks */ -#define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (10) -#define SCD_QUEUE_STTS_REG_MSK (0x0007FC00) - -/** - * 4965 internal SRAM structures for scheduler, shared with driver ... - * - * Driver should clear and initialize the following areas after receiving - * "Alive" response from 4965 uCode, i.e. after initial - * uCode load, or after a uCode load done for error recovery: - * - * SCD_CONTEXT_DATA_OFFSET (size 128 bytes) - * SCD_TX_STTS_BITMAP_OFFSET (size 256 bytes) - * SCD_TRANSLATE_TBL_OFFSET (size 32 bytes) - * - * Driver accesses SRAM via HBUS_TARG_MEM_* registers. - * Driver reads base address of this scheduler area from SCD_SRAM_BASE_ADDR. - * All OFFSET values must be added to this base address. - */ - -/* - * Queue context. One 8-byte entry for each of 16 queues. - * - * Driver should clear this entire area (size 0x80) to 0 after receiving - * "Alive" notification from uCode. Additionally, driver should init - * each queue's entry as follows: - * - * LS Dword bit fields: - * 0-06: Max Tx window size for Scheduler-ACK. Driver should init to 64. - * - * MS Dword bit fields: - * 16-22: Frame limit. Driver should init to 10 (0xa). - * - * Driver should init all other bits to 0. - * - * Init must be done after driver receives "Alive" response from 4965 uCode, - * and when setting up queue for aggregation. - */ -#define SCD_CONTEXT_DATA_OFFSET 0x380 -#define SCD_CONTEXT_QUEUE_OFFSET(x) (SCD_CONTEXT_DATA_OFFSET + ((x) * 8)) - -#define SCD_QUEUE_CTX_REG1_WIN_SIZE_POS (0) -#define SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK (0x0000007F) -#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) -#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) - -/* - * Tx Status Bitmap - * - * Driver should clear this entire area (size 0x100) to 0 after receiving - * "Alive" notification from uCode. Area is used only by device itself; - * no other support (besides clearing) is required from driver. - */ -#define SCD_TX_STTS_BITMAP_OFFSET 0x400 - -/* - * RAxTID to queue translation mapping. - * - * When queue is in Scheduler-ACK mode, frames placed in a that queue must be - * for only one combination of receiver address (RA) and traffic ID (TID), i.e. - * one QOS priority level destined for one station (for this wireless link, - * not final destination). The SCD_TRANSLATE_TABLE area provides 16 16-bit - * mappings, one for each of the 16 queues. If queue is not in Scheduler-ACK - * mode, the device ignores the mapping value. - * - * Bit fields, for each 16-bit map: - * 15-9: Reserved, set to 0 - * 8-4: Index into device's station table for recipient station - * 3-0: Traffic ID (tid), range 0-15 - * - * Driver should clear this entire area (size 32 bytes) to 0 after receiving - * "Alive" notification from uCode. To update a 16-bit map value, driver - * must read a dword-aligned value from device SRAM, replace the 16-bit map - * value of interest, and write the dword value back into device SRAM. - */ -#define SCD_TRANSLATE_TBL_OFFSET 0x500 - -/* Find translation table dword to read/write for given queue */ -#define SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \ - ((SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffffffc) - -#define SCD_TXFIFO_POS_TID (0) -#define SCD_TXFIFO_POS_RA (4) -#define SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF) - -/*********************** END TX SCHEDULER *************************************/ - static inline u8 iwl4965_hw_get_rate(__le32 rate_n_flags) { return le32_to_cpu(rate_n_flags) & 0xFF; } -static inline u16 iwl4965_hw_get_rate_n_flags(__le32 rate_n_flags) +static inline u32 iwl4965_hw_get_rate_n_flags(__le32 rate_n_flags) { - return le32_to_cpu(rate_n_flags) & 0xFFFF; + return le32_to_cpu(rate_n_flags) & 0x1FFFF; } static inline __le32 iwl4965_hw_set_rate_n_flags(u8 rate, u16 flags) { @@ -1385,11 +822,11 @@ static inline __le32 iwl4965_hw_set_rate_n_flags(u8 rate, u16 flags) * up to 7 DMA channels (FIFOs). Each Tx queue is supported by a circular array * in DRAM containing 256 Transmit Frame Descriptors (TFDs). */ -#define IWL4965_MAX_WIN_SIZE 64 -#define IWL4965_QUEUE_SIZE 256 -#define IWL4965_NUM_FIFOS 7 -#define IWL4965_MAX_NUM_QUEUES 16 - +#define IWL49_MAX_WIN_SIZE 64 +#define IWL49_QUEUE_SIZE 256 +#define IWL49_NUM_FIFOS 7 +#define IWL49_CMD_FIFO_NUM 4 +#define IWL49_NUM_QUEUES 16 /** * struct iwl4965_tfd_frame_data @@ -1520,10 +957,10 @@ struct iwl4965_queue_byte_cnt_entry { * 4965 assumes tables are separated by 1024 bytes. */ struct iwl4965_sched_queue_byte_cnt_tbl { - struct iwl4965_queue_byte_cnt_entry tfd_offset[IWL4965_QUEUE_SIZE + - IWL4965_MAX_WIN_SIZE]; + struct iwl4965_queue_byte_cnt_entry tfd_offset[IWL49_QUEUE_SIZE + + IWL49_MAX_WIN_SIZE]; u8 dont_care[1024 - - (IWL4965_QUEUE_SIZE + IWL4965_MAX_WIN_SIZE) * + (IWL49_QUEUE_SIZE + IWL49_MAX_WIN_SIZE) * sizeof(__le16)]; } __attribute__ ((packed)); @@ -1553,7 +990,7 @@ struct iwl4965_sched_queue_byte_cnt_tbl { */ struct iwl4965_shared { struct iwl4965_sched_queue_byte_cnt_tbl - queues_byte_cnt_tbls[IWL4965_MAX_NUM_QUEUES]; + queues_byte_cnt_tbls[IWL49_NUM_QUEUES]; __le32 rb_closed; /* __le32 rb_closed_stts_rb_num:12; */