X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fb43legacy%2Fmain.c;h=5f3f34e1dbfdc140f426c4660258ba54029780fd;hb=d55a4528f7f607ca2872fec18574bc8cec060f05;hp=aa20d5d56e2f479d625c2411c53228ebaa3876e9;hpb=24e1c13c93cbdd05e4b7ea921c0050b036555adc;p=linux-2.6

diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index aa20d5d56e..5f3f34e1db 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3,7 +3,7 @@
  *  Broadcom B43legacy wireless driver
  *
  *  Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>
- *  Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it>
+ *  Copyright (c) 2005-2008 Stefano Brivio <stefano.brivio@polimi.it>
  *  Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de>
  *  Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
  *  Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
@@ -60,6 +60,8 @@ MODULE_AUTHOR("Stefano Brivio");
 MODULE_AUTHOR("Michael Buesch");
 MODULE_LICENSE("GPL");
 
+MODULE_FIRMWARE(B43legacy_SUPPORTED_FIRMWARE_ID);
+
 #if defined(CONFIG_B43LEGACY_DMA) && defined(CONFIG_B43LEGACY_PIO)
 static int modparam_pio;
 module_param_named(pio, modparam_pio, int, 0444);
@@ -1640,10 +1642,11 @@ static int b43legacy_upload_microcode(struct b43legacy_wldev *dev)
 		err = -EOPNOTSUPP;
 		goto error;
 	}
-	b43legacydbg(dev->wl, "Loading firmware version 0x%X, patch level %u "
-	       "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", fwrev, fwpatch,
-	       (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
-	       (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
+	b43legacyinfo(dev->wl, "Loading firmware version 0x%X, patch level %u "
+		      "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", fwrev, fwpatch,
+		      (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
+		      (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F,
+		      fwtime & 0x1F);
 
 	dev->fw.rev = fwrev;
 	dev->fw.patch = fwpatch;
@@ -3160,8 +3163,6 @@ static int b43legacy_wireless_core_init(struct b43legacy_wldev *dev)
 	b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x0414, 0x01F4);
 
 	ssb_bus_powerup(bus, 1); /* Enable dynamic PCTL */
-	memset(wl->bssid, 0, ETH_ALEN);
-	memset(wl->mac_addr, 0, ETH_ALEN);
 	b43legacy_upload_card_macaddress(dev);
 	b43legacy_security_init(dev);
 	b43legacy_rng_init(wl);
@@ -3263,6 +3264,13 @@ static int b43legacy_op_start(struct ieee80211_hw *hw)
 	 * LEDs that are registered later depend on it. */
 	b43legacy_rfkill_init(dev);
 
+	/* Kill all old instance specific information to make sure
+	 * the card won't use it in the short timeframe between start
+	 * and mac80211 reconfiguring it. */
+	memset(wl->bssid, 0, ETH_ALEN);
+	memset(wl->mac_addr, 0, ETH_ALEN);
+	wl->filter_flags = 0;
+
 	mutex_lock(&wl->mutex);
 
 	if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED) {
@@ -3801,6 +3809,32 @@ static struct ssb_driver b43legacy_ssb_driver = {
 	.resume		= b43legacy_resume,
 };
 
+static void b43legacy_print_driverinfo(void)
+{
+	const char *feat_pci = "", *feat_leds = "", *feat_rfkill = "",
+		   *feat_pio = "", *feat_dma = "";
+
+#ifdef CONFIG_B43LEGACY_PCI_AUTOSELECT
+	feat_pci = "P";
+#endif
+#ifdef CONFIG_B43LEGACY_LEDS
+	feat_leds = "L";
+#endif
+#ifdef CONFIG_B43LEGACY_RFKILL
+	feat_rfkill = "R";
+#endif
+#ifdef CONFIG_B43LEGACY_PIO
+	feat_pio = "I";
+#endif
+#ifdef CONFIG_B43LEGACY_DMA
+	feat_dma = "D";
+#endif
+	printk(KERN_INFO "Broadcom 43xx-legacy driver loaded "
+	       "[ Features: %s%s%s%s%s, Firmware-ID: "
+	       B43legacy_SUPPORTED_FIRMWARE_ID " ]\n",
+	       feat_pci, feat_leds, feat_rfkill, feat_pio, feat_dma);
+}
+
 static int __init b43legacy_init(void)
 {
 	int err;
@@ -3811,6 +3845,8 @@ static int __init b43legacy_init(void)
 	if (err)
 		goto err_dfs_exit;
 
+	b43legacy_print_driverinfo();
+
 	return err;
 
 err_dfs_exit: